TC74HC244AF(EL,F) [TOSHIBA]
TC74HC244AF(EL,F);
| 型号： | TC74HC244AF(EL,F) |
| 厂家： | 
TOSHIBA |
| 描述： | TC74HC244AF(EL,F) |
| 文件： | 总8页 (文件大小：239K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TC74HC240,244AP/AF,241AP/AF
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74HC240AP,TC74HC240AF,TC74HC241AP
TC74HC241AF,TC74HC244AP,TC74HC244AF
Octal Bus Buffer
TC74HC240AP/AF
TC74HC241AP/AF
TC74HC244AP/AF
Inverted, 3-State
Outputs
TC74HC240AP, TC74HC241AP,
TC74HC244AP
Non-Inverted,
3-State Outputs
Non-Inverted,
3-State Outputs
The TC74HC240A, 241A and 244A are high speed CMOS
OCTAL BUS BUFFERs fabricated with silicon gate C2MOS
technology.
They achieve the high speed operation similar to equivalent
LSTTL while maintaining the CMOS low power dissipation.
The 74HC240A is an inverting 3-state buffer having two
active-low output enables. The TC74HC241A and TC74HC244A
are non-inverting 3-state buffers that differ only in that the 241A
has one active-high and one active-low output enable, and the
244A has two active-low output enables.
TC74HC240AF, TC74HC241AF, TC74HC244AF
These devices are designed to be used with 3-state memory
address drivers, etc.
All inputs are equipped with protection circuits against static
discharge or transient excess voltage.
Weight
DIP20-P-300-2.54A
SOP20-P-300-1.27A
: 1.30 g (typ.)
: 0.22 g (typ.)
Features
•
•
•
•
•
•
•
•
High speed: t = 10 ns (typ.) at V
= 5 V
pd
CC
Low power dissipation: I
= 4 μA (max) at Ta = 25°C
CC
High noise immunity: V
= V
= 28% V
(min)
NIH
NIL
CC
Output drive capability: 15 LSTTL loads
Symmetrical output impedance: |I | = I
= 6 mA (min)
OL
OH
∼
−
Balanced propagation delays: t
t
pHL
pLH
Wide operating voltage range: V
(opr) = 2~6 V
CC
Pin and function compatible with 74LS240/241/244
1
2007-10-01
TC74HC240,244AP/AF,241AP/AF
Pin Assignment
TC74HC240A
TC74HC241A
TC74HC244A
IEC Logic Symbol
TC74HC240A
TC74HC241A
TC74HC244A
Truth Table
Inputs
Outputs
ΔΔ
G
L
GΔ
H
H
L
A
Y
Y
n
H
L
n
n
L
L
L
H
X
H
Z
H
Z
Δ: For TC74HC241A only
ΔΔ: For TC74HC240A only
X: Don’t care
Z: High impedance
2
2007-10-01
TC74HC240,244AP/AF,241AP/AF
Absolute Maximum Ratings (Note 1)
Characteristics
Supply voltage range
Symbol
Rating
Unit
V
−0.5~7
V
V
CC
DC input voltage
V
−0.5~V
+ 0.5
IN
CC
CC
DC output voltage
Input diode current
Output diode current
DC output current
V
−0.5~V
+ 0.5
V
OUT
I
±20
±20
±35
±75
mA
mA
mA
mA
mW
°C
IK
I
OK
I
OUT
DC V /ground current
CC
I
CC
Power dissipation
P
500 (DIP) (Note 2)/180 (SOP)
D
Storage temperature
T
stg
−65~150
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2: 500 mW in the range of Ta = −40 to 65°C. From Ta = 65 to 85°C a derating factor of −10 mW/°C shall be
applied until 300 mW.
Operating Ranges (Note)
Characteristics
Supply voltage
Symbol
Rating
2~6
Unit
V
V
V
CC
Input voltage
V
0~V
0~V
IN
CC
CC
Output voltage
V
OUT
V
Operating temperature
T
opr
−40~85
°C
0~1000 (V
= 2.0 V)
CC
CC
CC
Input rise and fall time
t , t
0~500 (V
0~400 (V
= 4.5 V)
= 6.0 V)
ns
r
f
Note:
The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
3
2007-10-01
TC74HC240,244AP/AF,241AP/AF
Electrical Characteristics
DC Characteristics
Test Condition
Ta = 25°C
Typ.
⎯
Ta = −40~85°C
Characteristics
Symbol
Unit
V
V
CC
(V)
Min
1.50
3.15
4.20
⎯
Max
⎯
Min
1.50
3.15
4.20
⎯
Max
⎯
2.0
High-level input
voltage
V
IH
⎯
⎯
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
4.5
6.0
2.0
4.5
6.0
4.5
6.0
⎯
⎯
⎯
⎯
⎯
⎯
⎯
0.50
1.35
1.80
⎯
0.50
1.35
1.80
⎯
Low-level input
voltage
V
IL
⎯
⎯
⎯
V
V
⎯
⎯
⎯
1.9
4.4
5.9
4.18
5.68
⎯
2.0
1.9
4.4
5.9
4.13
5.63
⎯
I
= −20 μA
4.5
⎯
⎯
OH
High-level output
voltage
V
IN
V
OH
6.0
⎯
⎯
= V or V
IH IL
I
I
= −6 mA
4.31
5.80
0.0
⎯
⎯
OH
= −7.8 mA
⎯
⎯
OH
0.1
0.1
0.1
0.26
0.26
0.1
0.1
0.1
0.33
0.33
I
= 20 μA
⎯
0.0
⎯
OL
Low-level output
voltage
V
IN
V
OL
⎯
0.0
⎯
V
= V or V
IH IL
I
I
= 6 mA
⎯
0.17
0.18
⎯
OL
OL
IL
= 7.8 mA
⎯
⎯
V
V
= V or V
IH
IN
3-state output
off-state current
I
6.0
⎯
⎯
±0.5
⎯
±5.0
μA
OZ
= V
CC
or GND
OUT
Input leakage
current
I
V
= V
or GND
6.0
6.0
⎯
⎯
⎯
⎯
±0.1
⎯
⎯
±1.0
μA
μA
IN
IN
IN
CC
Quiescent supply
current
I
V
= V
or GND
4.0
40.0
CC
CC
4
2007-10-01
TC74HC240,244AP/AF,241AP/AF
AC Characteristics (input: t = t = 6 ns)
r
f
Test Condition
CL (pF)
Ta = 25°C
Typ.
25
7
Ta = −40~85°C
Characteristics
Symbol
Unit
ns
V
CC
(V)
Min
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Max
60
Min
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Max
75
2.0
t
t
TLH
Output transition time
⎯
⎯
50
50
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
12
15
THL
6
10
13
36
12
10
51
17
14
48
16
14
63
21
18
32
15
14
5
90
115
23
18
t
t
15
20
pLH
Propagation delay
time
ns
130
26
165
33
pHL
150
50
22
28
125
25
155
31
t
t
21
26
pZL
Output enable time
Output disable time
R
= 1 kΩ
ns
ns
L
165
33
205
41
pZH
150
50
28
35
125
25
155
31
t
pLZ
R
L
= 1 kΩ
t
pHZ
21
26
Input capacitance
Output capacitance
C
IN
⎯
⎯
10
10
pF
pF
C
OUT
10
31
33
⎯
⎯
C
PD
TC74HC240A
⎯
⎯
Power dissipation
capacitance
pF
(Note)
TC74HC241A/244A
⎯
⎯
Note:
C
PD
is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
I
(opr) = C ･V ･f + I /8 (per bit)
PD CC IN CC
CC
5
2007-10-01
TC74HC240,244AP/AF,241AP/AF
Package Dimensions
Weight: 1.30 g (typ.)
6
2007-10-01
TC74HC240,244AP/AF,241AP/AF
Package Dimensions
Weight: 0.22 g (typ.)
7
2007-10-01
TC74HC240,244AP/AF,241AP/AF
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
8
2007-10-01
相关型号：
TC74HC244AF(TP2)
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AF-EL
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AF-TP1
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AF-TP1EL
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AF-TP2
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AF-TP2EL
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AFW(ELP)
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AFW(TP1)
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AFW(TP2)
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
TC74HC244AFW-ELP
IC HC/UH SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver
TOSHIBA
©2020 ICPDF网 联系我们和版权申明