TC74LCX08FT_12 [TOSHIBA]
Low-Voltage Quad 2-Input AND Gate with 5-V Tolerant Inputs and Outputs;
| 型号： | TC74LCX08FT_12 |
| 厂家： | 
TOSHIBA |
| 描述： | Low-Voltage Quad 2-Input AND Gate with 5-V Tolerant Inputs and Outputs 栅 |
| 文件： | 总9页 (文件大小：210K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TC74LCX08F/FT/FK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74LCX08F,TC74LCX08FT,TC74LCX08FK
Low-Voltage Quad 2-Input AND Gate with 5-V Tolerant Inputs and Outputs
The TC74LCX08 is a high-performance CMOS 2-input AND
gate. Designed for use in 3.3-V systems, it achieves high-speed
TC74LCX08F
operation while maintaining the CMOS low power dissipation.
The device is designed for low-voltage (3.3 V) V
applications,
CC
but it could be used to interface to 5-V supply environment for
inputs.
All inputs are equipped with protection circuits against static
discharge.
Features
TC74LCX08FT
•
•
•
•
•
•
•
Low-voltage operation: V
= 2.0 to 3.6 V
CC
High-speed operation: t = 5.5 ns (max) (V
= 3.0 to 3.6 V)
pd
CC
Output current: |I |/I
= 24 mA (min) (V
= 3.0 V)
OH OL
CC
Latch-up performance: −500 mA
Available in JEITA SOP, TSSOP and VSSOP (US)
Power-down protection provided on all inputs and outputs
Pin and function compatible with the 74 series
(74AC/VHC/HC/F/ALS/LS etc.) 08 type
TC74LCX08FK
Weight
SOP14-P-300-1.27A
: 0.18 g (typ.)
TSSOP14-P-0044-0.65A : 0.06 g (typ.)
VSSOP14-P-0030-0.50 : 0.02 g (typ.)
1
2012-02-29
TC74LCX08F/FT/FK
Pin Assignment (top view)
IEC Logic Symbol
1
2
1A
1B
2A
2B
3A
3B
4A
4B
&
3
6
1Y
2Y
3Y
4Y
1A
1B
1
2
3
4
5
6
7
14
V
CC
4
13 4B
12 4A
11 4Y
10 3B
5
9
1Y
8
10
12
13
2A
11
2B
2Y
9
8
3A
3Y
GND
Truth Table
Inputs
Outputs
A
L
B
L
Y
L
L
H
L
L
H
H
L
H
H
Absolute Maximum Ratings (Note 1)
Characteristics
Power supply voltage
Symbol
Rating
Unit
V
−0.5 to 7.0
−0.5 to 7.0
V
V
CC
DC input voltage
V
IN
−0.5 to 7.0 (Note 2)
DC output voltage
V
V
OUT
−0.5 to V + 0.5
CC
(Note 3)
Input diode current
Output diode current
DC output current
Power dissipation
I
−50
mA
mA
mA
mW
mA
°C
IK
I
±50
±50
(Note 4)
OK
I
OUT
P
180
D
DC V /ground current
CC
I
/I
CC GND
±100
Storage temperature
T
stg
−65 to 150
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 2:
V
CC
= 0 V
Note 3: High or low state. I
absolute maximum rating must be observed.
OUT
Note 4:
V
OUT
< GND, V > V
OUT CC
2
2012-02-29
TC74LCX08F/FT/FK
Operating Ranges (Note 1)
Characteristics
Symbol
Rating
Unit
V
2.0 to 3.6
Power Supply voltage
V
CC
1.5 to 3.6 (Note 2)
0 to 5.5
Input voltage
V
V
V
IN
0 to 5.5 (Note 3)
Output voltage
V
OUT
0 to V
(Note 4)
(Note 5)
(Note 6)
CC
±24
±12
Output current
I
/I
mA
OH OL
Operating temperature
Input rise and fall time
T
−40 to 85
°C
opr
dt/dv
0 to 10 (Note 7)
ns/V
Note 1: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 2: Data retention only
Note 3:
V
CC
= 0 V
Note 4: High or low state
Note 5:
Note 6:
Note 7:
V
V
V
= 3.0 to 3.6 V
= 2.7 to 3.0 V
CC
CC
= 0.8 to 2.0 V, V
= 3.0 V
IN
CC
Electrical Characteristics
DC Characteristics (Ta = −40 to 85°C)
Characteristics
Symbol
Test Condition
Min
Max
Unit
V
V
(V)
CC
H-level
V
⎯
⎯
2.7 to 3.6
2.7 to 3.6
2.0
⎯
IH
Input voltage
L-level
H-level
V
⎯
0.8
IL
V
CC
I
= −100 μA
2.7 to 3.6
⎯
OH
− 0.2
2.2
2.4
2.2
⎯
I
I
I
I
I
I
I
= −12 mA
= −18 mA
= −24 mA
= 100 μA
= 12 mA
= 16 mA
= 24 mA
2.7
3.0
⎯
⎯
OH
OH
OH
OL
OL
OL
OL
V
V
V
= V
IH
OH
IN
3.0
⎯
Output voltage
V
2.7 to 3.6
2.7
0.2
⎯
0.4
L-level
V
= V or V
IH IL
OL
IN
IN
3.0
⎯
0.4
3.0
⎯
0.55
±5.0
10.0
10.0
±10.0
500
Input leakage current
I
V
V
V
V
V
= 0 to 5.5 V
2.7 to 3.6
0
⎯
μA
μA
IN
Power-off leakage current
Quiescent supply current
Increase in Icc per input
I
/V
IN OUT
= 5.5 V
⎯
OFF
= V
or GND
CC
2.7 to 3.6
2.7 to 3.6
2.7 to 3.6
⎯
IN
IN
IH
I
CC
μA
= 3.6 to 5.5 V
= V − 0.6 V
⎯
ΔI
⎯
CC
CC
3
2012-02-29
TC74LCX08F/FT/FK
AC Characteristics (Ta = −40 to 85°C)
Characteristics
Propagation delay time
Output to output skew
Symbol
Test Condition
Min
Max
Unit
ns
V
(V)
CC
t
t
2.7
⎯
1.5
⎯
6.2
5.5
⎯
pLH
pHL
Figure 1, Figure 2
3.3 ± 0.3
2.7
t
osLH
osHL
(Note)
ns
t
3.3 ± 0.3
⎯
1.0
Note:
Parameter guaranteed by design.
(t = |t − t |, t = |t
− t |)
pHLn
osLH
pLHm
pLHn osHL
pHLm
Dynamic Switching Characteristics (Ta = 25°C, input: t = t = 2.5 ns, C = 50 pF, R = 500 Ω)
r
f
L
L
Characteristics
Symbol
Test Condition
Typ.
Unit
V
(V)
CC
3.3
3.3
Quiet output maximum dynamic V
V
V
V
= 3.3 V, V = 0 V
0.8
0.8
V
V
OL
OLP
OLV
IH
IH
IL
Quiet output minimum dynamic V
|V
|
= 3.3 V, V = 0 V
IL
OL
Capacitive Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Typ.
Unit
V
(V)
CC
Input capacitance
C
⎯
⎯
3.3
0
7
8
pF
pF
pF
IN
Output capacitance
C
OUT
Power dissipation capacitance
C
f
= 10 MHz
IN
(Note)
3.3
25
PD
Note:
C
PD
is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
I
= C ･V ･f + I /4 (per gate)
PD CC IN CC
CC (opr)
4
2012-02-29
TC74LCX08F/FT/FK
AC Test Circuit
Output
Measure
C
R
= 50 pF
= 500 Ω
L
L
Figure 1
AC Waveform
t 2.5 ns
r
t 2.5 ns
f
2.7 V
90%
1.5 V
Input
10%
GND
V
V
OH
OL
Output
1.5 V
t
t
pHL
pLH
Figure 2 t
, t
pLH pHL
5
2012-02-29
TC74LCX08F/FT/FK
Package Dimensions
Weight: 0.18 g (typ.)
6
2012-02-29
TC74LCX08F/FT/FK
Package Dimensions
Weight: 0.06 g (typ.)
7
2012-02-29
TC74LCX08F/FT/FK
Package Dimensions
Weight: 0.02 g (typ.)
8
2012-02-29
TC74LCX08F/FT/FK
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
9
2012-02-29
相关型号：
TC74LCX125F(EL)
IC LVC/LCX/Z SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-14, Bus Driver/Transceiver
TOSHIBA
TC74LCX125F(ELP)
IC LVC/LCX/Z SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-14, Bus Driver/Transceiver
TOSHIBA
TC74LCX125FEL
IC LVC/LCX/Z SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-14, Bus Driver/Transceiver
TOSHIBA
TC74LCX125FELP
IC LVC/LCX/Z SERIES, QUAD 1-BIT DRIVER, TRUE OUTPUT, PDSO14, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-14, Bus Driver/Transceiver
TOSHIBA
©2020 ICPDF网 联系我们和版权申明