TC74LVX32FT(EL) [TOSHIBA]
IC IC,LOGIC GATE,QUAD 2-INPUT OR,LVX-CMOS,TSSOP,14PIN,PLASTIC, Gate;型号: | TC74LVX32FT(EL) |
厂家: | TOSHIBA |
描述: | IC IC,LOGIC GATE,QUAD 2-INPUT OR,LVX-CMOS,TSSOP,14PIN,PLASTIC, Gate 栅 输入元件 光电二极管 逻辑集成电路 触发器 |
文件: | 总7页 (文件大小:180K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TC74LVX32F/FT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74LVX32F,TC74LVX32FT
Quad 2-Input OR Gate
TC74LVX32F
The TC74LVX32F/ FT is a high-speed CMOS 2-input OR gate
fabricated with silicon gate CMOS technology. Designed for use
in 3-V systems, it achieves high-speed operation while
maintaining the CMOS low power dissipation.
This device is suitable for low-voltage and battery operated
systems.
The internal circuit is composed of 4 stages including buffer
output, which provide high noise immunity and stable output.
An input protection circuit ensures that 0 to 5.5V can be
applied to the input pins without regard to the supply voltage.
This device can be used to interface 5V to 3V systems and two
supply systems such as battery back up. This circuit prevents
device destruction due to mismatched supply and input voltages.
TC74LVX32FT
Features
•
•
•
High-speed: t = 4.4 ns (typ.) (V
= 3.3 V)
pd
CC
Low power dissipation: I
= 2 μA (max) (Ta = 25°C)
CC
Input voltage level: V = 0.8 V (max) (V
= 3 V)
= 3 V)
IL
CC
CC
V
IH
= 2.0 V (min) (V
Weight
SOP14-P-300-1.27A
TSSOP14-P-0044-0.65A
•
•
•
•
Power-down protection provided on all inputs
: 0.18 g (typ.)
: 0.06 g (typ.)
∼
−
Balanced propagation delays: t
t
pHL
pLH
Low noise: V
= 0.5 V (max)
OLP
Pin and function compatible with 74HC32
1
2012-02-29
TC74LVX32F/FT
Pin Assignment (top view)
IEC Logic Symbol
(1)
>
1A
1B
2A
2B
3A
3B
4A
4B
1
(3)
1Y
(2)
(4)
1A
1B
1
2
3
4
5
6
7
14
V
CC
(6)
2Y
(5)
13 4B
12 4A
11 4Y
10 3B
(9)
(8)
3Y
1Y
(10)
(12)
(13)
(11)
4Y
2A
2B
2Y
9
8
3A
3Y
GND
Truth Table
Inputs
Outputs
A
L
B
L
Y
L
L
H
L
H
H
H
H
H
H
Absolute Maximum Ratings (Note)
Characteristics
Supply voltage range
Symbol
Rating
Unit
V
−0.5 to 7.0
−0.5 to 7.0
V
V
CC
DC input voltage
V
IN
DC output voltage
Input diode current
Output diode current
DC output current
V
−0.5 to V
+ 0.5
V
OUT
CC
I
−20
mA
mA
mA
mA
mW
°C
IK
I
±20
±25
OK
I
OUT
DC V /ground current
CC
I
±50
CC
Power dissipation
P
180
D
Storage temperature
T
−65 to 150
stg
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
2
2012-02-29
TC74LVX32F/FT
Operating Ranges (Note)
Characteristics
Symbol
Rating
Unit
Supply voltage
V
2.0 to 3.6
0 to 5.5
V
V
CC
Input voltage
V
IN
Output voltage
V
0 to V
V
OUT
CC
Operating temperature
Input rise and fall time
T
−40 to 85
°C
ns/V
opr
dt/dv
0 to 100
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Electrical Characteristics
DC Characteristics
Ta = −40 to
Ta = 25°C
85°C
Characteristics
Symbol
Test Condition
Unit
V
(V)
Min
1.5
2.0
2.4
⎯
Typ.
⎯
⎯
⎯
⎯
⎯
⎯
2.0
3.0
⎯
0
Max
⎯
Min
1.5
2.0
2.4
⎯
Max
⎯
CC
2.0
H-level
V
⎯
3.0
3.6
2.0
3.0
3.6
2.0
3.0
3.0
2.0
3.0
3.0
3.6
3.6
⎯
⎯
IH
⎯
⎯
Input voltage
V
0.5
0.8
0.8
⎯
0.5
0.8
0.8
⎯
L-level
H-level
L-level
V
⎯
⎯
⎯
IL
⎯
⎯
I
I
I
I
I
I
= −50 μA
= −50 μA
= −4 mA
= 50 μA
= 50 μA
= 4 mA
1.9
2.9
2.58
⎯
1.9
2.9
2.48
⎯
OH
OH
OH
OL
OL
OL
V
or V
= V
IL
IN
IH
IL
V
⎯
⎯
OH
⎯
⎯
Output voltage
V
0.1
0.1
0.36
±0.1
2.0
0.1
0.1
0.44
±1.0
20.0
V
V
= V
⎯
0
⎯
OL
IN
⎯
⎯
⎯
⎯
⎯
Input leakage current
I
V
V
= 5.5 V or GND
⎯
⎯
μA
μA
IN
IN
IN
Quiescent supply current
I
= V
or GND
CC
⎯
⎯
CC
3
2012-02-29
TC74LVX32F/FT
AC Characteristics (input: t = t = 3 ns)
r
f
Ta = −40 to
Ta = 25°C
85°C
Characteristics
Symbol Test Condition
Unit
V
(V)
C
(pF)
Min
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Typ.
5.8
8.3
4.4
6.9
⎯
Max
10.7
14.2
6.6
Min
1.0
1.0
1.0
1.0
⎯
Max
CC
L
15
13.5
17.0
8.0
11.5
1.5
1.5
10
t
t
2.7
pLH
50
15
50
50
50
Propagation delay time
Output to output skew
⎯
ns
ns
3.3 ± 0.3
pHL
10.1
1.5
t
2.7
osLH
osHL
(Note 1)
t
3.3 ± 0.3
⎯
1.5
⎯
Input capacitance
C
(Note 2)
(Note 3)
4
10
⎯
pF
pF
IN
Power dissipation capacitance
C
14
⎯
⎯
⎯
PD
Note 1: Parameter guaranteed by design.
(t = |t − t |, t = |t
− t |)
pHLn
osLH
pLHm
pLHn osHL
pHLm
Note 2: Parameter guaranteed by design.
Note 3: is defined as the value of the internal equivalent capacitance which is calculated from the operating
C
PD
current consumption.
Average operating current can be obtained by the equation:
I
= C ・V ・f + I /4 (per gate)
PD CC IN CC
CC (opr)
Noise Characteristics (Ta = 25°C, input: t = t = 3 ns, C = 50 pF)
r
f
L
Limit
Test Condition
Characteristics
Symbol
Typ.
Unit
V
(V)
CC
Quiet output maximum dynamic V
V
V
⎯
⎯
⎯
⎯
3.3
0.3
−0.3
⎯
0.5
−0.5
2.0
V
V
V
V
OL
OLP
OLV
Quiet output minimum dynamic V
3.3
3.3
3.3
OL
Minimum high level dynamic input voltage V
V
IHD
IH
Maximum low level dynamic input voltage V
V
⎯
0.8
IL
ILD
Input Equivalent Circuit
INPUT
4
2012-02-29
TC74LVX32F/FT
Package Dimensions
Weight: 0.18 g (typ.)
5
2012-02-29
TC74LVX32F/FT
Package Dimensions
Weight: 0.06 g (typ.)
6
2012-02-29
TC74LVX32F/FT
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
7
2012-02-29
相关型号:
TC74LVX373F(EL)
IC LV/LV-A/LVX/H SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-20, Bus Driver/Transceiver
TOSHIBA
TC74LVX373F(ELP)
IC LV/LV-A/LVX/H SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-20, Bus Driver/Transceiver
TOSHIBA
TC74LVX373FEL
IC LV/LV-A/LVX/H SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-20, Bus Driver/Transceiver
TOSHIBA
TC74LVX373FELP
IC LV/LV-A/LVX/H SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, EIAJ TYPE2, PLASTIC, SOP-20, Bus Driver/Transceiver
TOSHIBA
TC74LVX373FN
IC LV/LV-A/LVX/H SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, SOP-20, Bus Driver/Transceiver
TOSHIBA
©2020 ICPDF网 联系我们和版权申明