TC7WBL125AFK(TE85L) [TOSHIBA]
IC,BUS SWITCH,CMOS,TSSOP,8PIN,PLASTIC;型号: | TC7WBL125AFK(TE85L) |
厂家: | TOSHIBA |
描述: | IC,BUS SWITCH,CMOS,TSSOP,8PIN,PLASTIC 驱动 光电二极管 逻辑集成电路 |
文件: | 总6页 (文件大小:166K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TC7WBL125AFK
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC7WBL125AFK
Low-Voltage Dual Bus Switch
The TC7WBL125AFK provides two bits of low-voltage,
high-speed bus switching. The low ON-resistance of the switch
allows connections to be made with minimal propagation delay
and while maintaining CMOS low power dissipation.
The device comprises dual 2-bit switches with separate bus
enable ( OE ) signals. When OE is low, the switch is on and port
A is connected to port B. When OE is high, the switch is off and
a high-impedance state exists between the two ports.
All inputs are equipped with protection circuits to guard
against static discharge.
Weight: 0.01 g (typ.)
Features
•
•
•
•
Operating voltage range: V
= 2 to 3.6 V
CC
High speed: t = 0.31 ns (max) @ 3 V
pd
Ultra-low ON-resistance: R
= 5 Ω (typ.) @ 3 V
ON
ESD performance:Machine model ≥ ±200 V
Human body model ≥ ±2000 V
•
•
Power-down protection provided on inputs ( OE input only)
Package: US8
Pin Assignment (top view)
V
OE2 B1 A2
CC
8
7
6
5
W L A
1 2 5
1
2
3
4
OE1 A1 B2 GND
1
2007-10-19
TC7WBL125AFK
Truth Table
Inputs
Function
OE
L
A port = B port
H
Disconnect
Logic Diagram
A1
B1
A2
B2
OE1
OE2
Absolute Maximum Ratings (Note) (Ta = 25°C)
Characteristic
Power supply range
Symbol
V
Rating
Unit
−0.5~4.6
−0.5~4.6
−0.5~Vcc+0.5
−50
V
V
V
CC
Control pin input voltage
V
IN
Switch terminal I/O voltage
V
S
Clump diode
current
Control input pin
Switch terminal
I
mA
IK
±50
Switch I/O current
Power dissipation
I
128
mA
mW
mA
°C
S
P
200
D
DC V /GND current
CC
I
/I
±100
CC GND
Storage temperature
T
stg
−65~150
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Operating Ranges (Note)
Characteristic
Power supply voltage
Symbol
Rating
Unit
V
2.0~3.6
0~3.6
V
V
CC
Control pin input voltage
Switch I/O voltage
V
IN
V
0~Vcc
−40~85
0~10
V
S
Operating temperature
Input rise and fall time
T
opr
°C
ns/V
dt/dv
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
2
2007-10-19
TC7WBL125AFK
Electrical Characteristics
DC Characteristics (Ta = −40 to 85°C)
Characteristic
Symbol
Test Condition
Min
Typ.
⎯
Max
Unit
V
(V)
CC
0.7 ×
High-level control input voltage
Low-level control input voltage
V
⎯
⎯
2.0 to 3.6
2.0 to 3.6
⎯
IH
V
CC
V
0.3 ×
V
⎯
⎯
IL
V
CC
Control input current
I
V
= 0 to 3.6 V
2.0 to 3.6
0
⎯
⎯
⎯
⎯
±1.0
±1.0
μA
μA
IN
IN
Power off leakage current
I
OFF
OE = 0 to 3.6 V
Off-stage leakage current
(switch off)
I
A, B = 0 to V , OE = V
CC
2.0 to 3.6
⎯
⎯
±1.0
μA
SZ
CC
V
V
V
V
V
V
V
= 0 V, I = 30 mA
IS
(Note 1)
(Note 1)
(Note 1)
(Note 1)
(Note 1)
(Note 1)
3.0
3.0
3.0
2.3
2.3
2.3
3.6
⎯
⎯
⎯
⎯
⎯
⎯
⎯
2
3
7
IS
IS
IS
IS
IS
IS
IN
= 3.0 V, I = 30 mA
IS
9
= 2.4 V, I = 15 mA
IS
5
15
10
15
25
10
Switch ON-resistance
(Note 2)
R
Ω
ON
= 0 V, I = 24 mA
IS
3
= 2.3 V, I = 24 mA
IS
4
= 2.0 V, I = 15 mA
IS
9
Quiescent supply current
I
= V
or GND, I
= 0
OUT
⎯
μA
CC
CC
Note 1: All typical values are at Ta = 25°C.
Note 2: Measured by voltage drop between A and B pins at indicated current through the switch. ON-resistance is
determined by the lower of the voltages on the two pins (A or B).
AC Characteristics (Ta = −40 to 85°C)
Characteristic
Symbol
Test Condition
Min
Max
Unit
V
(V)
CC
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
2.5 ± 0.2
3.3 ± 0.3
2.5 ± 0.2
⎯
⎯
⎯
⎯
⎯
⎯
0.31
0.52
7
t
t
pLH
pHL
Propagation delay (bus to bus)
Figure 1, Figure 2
(Note)
ns
t
t
pZL
pZH
Output enable time
Output disable time
Figure 1, Figure 3
Figure 1, Figure 3
ns
ns
10
8
t
t
pLZ
pHZ
9
Note: This parameter is guaranteed by design but is not tested. The bus switch contributes no propagation delay
other than the RC delay of the typical ON-resistance of the switch and the 50 pF load capacitance when
driven by an ideal voltage from the source (zero output impedance).
Capacitance (Ta = 25°C)
Characteristic
Symbol
Test Condition
Typ.
Unit
V
(V)
CC
3.0
3.0
Control input capacitance
Switch terminal capacitance
C
IN
3
pF
pF
C
OE = V
23
I/O
CC
3
2007-10-19
TC7WBL125AFK
AC Test Circuit
Open
2 × V
GND
Switch
Test
Switch
CC
t
, t
pLH pHL
Open
Measure
Output
t
, t
2 × V
pLZ pZL
CC
t
, t
GND
C
R
= 50 pF
= 500 Ω
pHZ pZH
L
L
Figure 1
AC Waveforms
t 2.5 ns
r
t 2.5 ns
f
V
CC
90%
50%
Input
(A, B)
10%
GND
V
V
OH
OL
Output
(B, A)
50%
t
t
pLH
pHL
Figure 2 t
, t
pLH pHL
t 2.5 ns
r
t 2.5 ns
f
V
CC
Output Enable
( OE )
90%
50%
10%
t
GND
t
t
pLZ
pHZ
pZL
V
V
V
V
OH
OL
OH
OL
Output (A, B)
50%
50%
Low to Off to Low
10%
90%
t
pZH
Output (A, B)
High to Off to High
Outputs
enabled
Outputs
disabled
Outputs
enabled
Figure 3 t
, t
, t
, t
pLZ pHZ pZL pZH
4
2007-10-19
TC7WBL125AFK
Package Dimensions
Weight: 0.01 g (typ.)
5
2007-10-19
TC7WBL125AFK
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2007-10-19
相关型号:
TC7WBL125AFK(TE85L,F)
IC,BUS SWITCH,CMOS,TSSOP,8PIN,PLASTICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL125FK
TOSHIBA CMOS Digital Integrated Circuit Silicon MonolithicWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL126AFK
CMOS Digital Integrated Circuit Silicon Monolithic Low-Voltage Dual Bus SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL126AFK(TE85L)
IC,BUS SWITCH,CMOS,TSSOP,8PIN,PLASTICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL126AFK(TE85L,F)
IC,BUS SWITCH,CMOS,TSSOP,8PIN,PLASTICWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL126FK
IC HC/UH SERIES, DUAL 1-BIT DRIVER, TRUE OUTPUT, PDSO8, 0.50 MM PITCH, PLASTIC, SSOP-8, Bus Driver/TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL3305C
IC DRIVER, Bus Driver/TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL3305CFK
Low Voltage / Low Capacitance Dual Bus SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL3305CFK(TE85L)
TC7WBL3305CFK(TE85L)Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL3305CFK,LF(T
Bus DriverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL3306C
IC DRIVER, Bus Driver/TransceiverWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
TC7WBL3306CFK
Low Voltage / Low Capacitance Dual Bus SwitchWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOSHIBA
©2020 ICPDF网 联系我们和版权申明