TC7WH240FKTE85L [TOSHIBA]

IC LV/LV-A/LVX/H SERIES, DUAL 1-BIT DRIVER, INVERTED OUTPUT, PDSO8, 0.50 MM PITCH, PLASTIC, SSOP-8, Bus Driver/Transceiver;


型号：	TC7WH240FKTE85L
厂家：	TOSHIBA
描述：	IC LV/LV-A/LVX/H SERIES, DUAL 1-BIT DRIVER, INVERTED OUTPUT, PDSO8, 0.50 MM PITCH, PLASTIC, SSOP-8, Bus Driver/Transceiver 栅驱动光电二极管输出元件逻辑集成电路触发器
文件：	总7页 (文件大小：179K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TC7WH240FU/FK

TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic

TC7WH240FU, TC7WH240FK

Dual Bus Buffer Inverted, 3-State Outputs

Features

TC7WH240FU

•

High speed: t = 3.6ns (typ.) at V

= 5V, C = 15pF

CC L

Low power dissipation: I

= 2 μA (max) at Ta = 25°C

High noise immunity: V

5.5V Tolerant inputs.

= V

= 28% V

(min)

NIH

NIL

Balanced propagation delays: t

≈ t

pHL

pLH

Wide operating voltage range: V

= 2 to 5.5 V

Low Noise : V

= 0.8 V (max)

OLP

TC7WH240FK

(SM8)

Marking

SM8

US8

Product Name

Lot No.

H 2 4 0

W H

240

(US8)

Weight

SSOP8-P-0.65: 0.02 g (typ.)

SSOP8-P-0.50A: 0.01 g (typ.)

Absolute Maximum Ratings (Ta = 25°C)

Pin Assignment (top view)

Characteristics

Supply voltage

Symbol

Rating

Unit

−0.5 to 7.0

DC input voltage

DC output voltage

Input diode current

Output diode current

DC output current

−0.5 to V

+ 0.5

OUT

−20

±20 (Note 1)

±25

OUT

DC V /ground current

±50

300 (SM8)

200 (US8)

−65 to 150

260

Power dissipation

GND

Storage temperature

stg

°C

Lead temperature (10 s)

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc).

Note 1: V_OUT< GND, V_OUT> V_CC

Start of commercial production

1997-01

2014-03-01

TC7WH240FU/FK

IEC Logic Symbol

Truth Table

INPUTS

OUTPUTS

X: Don’t Care

Z: High Impedance

Operating Ranges

Characteristics

Symbol

Rating

Unit

Supply voltage

Input voltage

2.0 to 5.5

0 to 5.5

Output voltage

0 to V

OUT

Operating temperature

opr

−40 to 85

°C

0 to 100 (V

= 3.3 ± 0.3 V)

Input rise and fall time

dt/dv

ns/V

0 to 20 (V

= 5.0 ± 0.5 V)

2014-03-01

TC7WH240FU/FK

Electrical Characteristics

DC Characteristics

Ta = 25°C

Typ.

Ta = −40 to 85°C

Characteristics

Symbol

Test Condition

Unit

(V)

Min

1.5

Max

Min

1.5

Max

2.0

⎯

High-level input voltage

⎯

3.0 to

5.5

× 0.7

⎯

2.0

⎯

0.5

⎯

0.5

Low-level input voltage

High-level output voltage

⎯

3.0 to

5.5

× 0.3

⎯

× 0.3

2.0

3.0

4.5

3.0

4.5

2.0

3.0

4.5

3.0

4.5

1.9

2.9

4.4

2.58

3.94

⎯

2.0

3.0

4.5

⎯

1.9

2.9

4.4

2.48

3.80

⎯

= −50 μA

⎯

or V

= −4 mA

= −8 mA

⎯

0.0

⎯

0.1

0.36

0.1

0.44

= 50 μA

⎯

or V

Low-level output voltage

⎯

= 4 mA

= 8 mA

⎯

3-State Output

Off-State Current

= V or V

OUT

or GND

5.5

⎯

0.25

⎯

2.50

μA

= V

Input leakage current

= 5.5 V or GND

0 to 5.5

5.5

⎯

±0.1

⎯

±1.0

μA

Quiescent supply current

= V

or GND

2.0

20.0

2014-03-01

TC7WH240FU/FK

AC Characteristics (unless otherwise specified, Input: t = t = 3 ns)

Ta = 25°C

Typ.

5.3

Ta = −40~85°C

Characteristics

Symbol Test Condition

Unit

(V)

C (pF)

Min

⎯

Max

7.5

Min

1.0

⎯

Max

9.0

3.3 ± 0.3

5.0 ± 0.5

3.3 ± 0.3

5.0 ± 0.5

7.8

11.0

5.5

12.5

6.5

pLH

Propagation Delay Time

3.6

pHL

5.1

7.5

8.5

6.6

10.6

14.1

7.3

12.5

16.0

8.5

9.1

pZL

3-State Output

Enable Time

= 1kΩ

4.7

pZH

6.2

9.3

10.5

16.0

10.5

1.5

3.3 ± 0.3

5.0 ± 0.5

3.3 ± 0.3

5.0 ± 0.5

10.3

6.7

14.0

9.2

pLZ

3-State Output

Disable Time

pHZ

⎯

1.5

osLH

osHL

Output to Output

Skew

(Note 2)

⎯

1.0

⎯

1.0

Input Capacitance

Output Capacitance

⎯

I/O

Power Dissipation

Capacitance

(Note 3)

⎯

Note 2: Parameter guaranteed by design.

= |t - t |, t = |t

- t

osLH

pLHm pLHn osHL

pHLm pHLn

Note 3: C_PDis defined as the value of the internal equivalent capacitance which is calculated from the operating

current consumption without load.

Average operating current can be obtained by the equation :

= C ･V ･f + I /2

PD CC IN CC

CC (opr)

Noise Characteristics (Ta = 25°C, input: t_r= t_f= 3 ns)

Characteristics

Symbol

Test Condition

Typ.

Limit

Unit

(V)

Quiet output maximum dynamic V

= 50 pF

5.0

0.5

0.8

OLP

OLV

Quiet output minimum dynamic V

5.0

−0.5

−0.8

Minimum high level dynamic input

voltage

= 50 pF

⎯

3.5

1.5

IHD

Maximum low level dynamic input

voltage

5.0

ILD

Input Equivalent Circuit

2014-03-01

TC7WH240FU/FK

Package Dimensions

Weight: 0.02 g (typ.)

2014-03-01

TC7WH240FU/FK

Package Dimensions

Weight: 0.01 g (typ.)

2014-03-01

TC7WH240FU/FK

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively "Product") without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.

Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR

APPLICATIONS.

•

PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH

MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without

limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for

automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,

safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE

PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your

TOSHIBA sales representative.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the

U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited

except in compliance with all applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES

OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2014-03-01

TC7WH240FKTE85L [TOSHIBA]

相关型号：

TC7WH240FK_09

TC7WH240FU

TC7WH240FUTE12L

TC7WH240FU_09

TC7WH241

TC7WH241FK

TC7WH241FK(TE85L)

TC7WH241FK(TE85L,F)

TC7WH241FK_09

TC7WH241FU

TC7WH241FU(TE12L,F)

TC7WH241FU_09