TD62381PG [TOSHIBA]
IC LED DISPLAY DRIVER, PDIP18, 0.300 INCH, 2.54 MM PITCH, LEAD FREE, PLASTIC, DIP-18, Display Driver;
| 型号： | TD62381PG |
| 厂家： | 
TOSHIBA |
| 描述： | IC LED DISPLAY DRIVER, PDIP18, 0.300 INCH, 2.54 MM PITCH, LEAD FREE, PLASTIC, DIP-18, Display Driver 驱动 光电二极管 接口集成电路 |
| 文件： | 总8页 (文件大小：213K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TD62381PG/FG
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC
TD62381PG,TD62381FG
8CH LOW SATURATION SINK DRIVER
The TD62381PG and TD62381FG are comprised of eight NPN
low saturation drivers. These devices are specifically designed for
multiplexed digit driving of eight digit common−cathode LED and
also can be employed as a sink driver for multiplexed LED
displays using with the TD62785P and TD62785F at standard
supply voltage, 5 V.
Applications include relay, hammer, lamp and LED display
drivers.
FEATURES
z Low saturation output voltage: V
= 0.9 V (Max.)
CE (sat)
@I
= 500 mA
out
z Output rating 15 V (Min.) / 500 mA (Max.)
z Input compatible with TTL and 5 V CMOS
z Low level active inputs
z Standard supply voltage
z Package type−PG: DIP−18 pin
z Package type−FG: SOP−18 pin
Weight
DIP18-P-300-2.54D: 1.47 g (Typ.)
SOP18-P-375-1.27 : 0.41 g (Typ.)
PIN CONNECTION (TOP VIEW)
SCHEMATICS (EACH DRIVER)
Note:
The input and output parasitic diodes cannot be used
as clamp diodes.
1
2004-01-30
TD62381PG/FG
MAXIMUM RATINGS (Ta = 25°C)
CHARACTERISTIC
Supply Voltage
SYMBOL
RATING
UNIT
V
7
15
V
V
CC
V
CE (SUS)
Output Sustaining Voltage
Output Current
I
500
mA / ch
V
OUT
Input Voltage
V
7
IN
IN
Input Current
I
5
mA
PG
FG
1.47
0.96
−40~85
−55~150
Power Dissipation
P
(Note)
W
D
Operating Temperature
Storage Temperature
T
°C
°C
opr
T
stg
Note:
Delated above 25°C in the proportion of 11.7 mW / °C (PG-Type), 7.7 mW /°C (FG-Type).
RECOMMENDED OPERATING CONDITIONS (Ta = −40~85°C)
CHARACTERISTIC
Supply Voltage
SYMBOL
CONDITION
MIN
TYP.
MAX
UNIT
V
⎯
⎯
4.5
⎯
0
5.0
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
5.5
12
V
V
CC
Output Voltage
V
OUT
PG
FG
400
400
400
350
400
330
DC 1 Circuit, Ta = 25°C
0
Duty = 10%
Duty = 50%
Duty = 10%
Duty = 50%
0
T
≤ 25 ms
pw
mA /
ch
Output Current
PG
FG
I
OUT
8 Circuit On
Ta = 85°C
0
0
T = 120°C
j
0
V
⎯
0
V
V
IN
CC
CC
Input Voltage
V
Output On
Output Off
PG
V
⎯
⎯
⎯
⎯
2.4
0
IN (ON)
V
0.4
IN (OFF)
⎯
⎯
0.52
0.35
Power Dissipation
P
W
D
FG
ELECTRICAL CHARACTERISTICS (Ta = 25°C, V = 5 V)
CC
TEST
CIR−
CUIT
CHARACTERISTIC
SYMBOL
TEST CONDITION
MIN
TYP.
MAX
100
UNIT
V
V
= OPEN
= 12 V, Ta = 85°C
IN
OUT
Output Leakage Current
I
1
2
⎯
⎯
µA
CEX
I
I
= 500 mA
= 350 mA
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
0.9
0.7
0.7
2.4
17
OUT
OUT
Output Saturation Voltage
V
V
CE (sat)
Input Current
I
3
⎯
4
V
V
V
= 5 V, V = 2.4 V
IN
0.4
⎯
mA
V
IN (ON)
CC
CC
CC
Input Voltage (Output on)
Supply Current
V
= 5 V
IN (ON)
I
t
= V = 5 V
IN
⎯
mA / ch
µs
CC
Turn-On Delay
0.1
1.2
⎯
ON
V
= 10 V, R = 20 Ω
L
C = 15 pF
OUT
L
5
Turn-Off Delay
t
⎯
µs
OFF
2
2004-01-30
TD62381PG/FG
TEST CIRCUIT
1. ICEX
2. VCE (sat)
3. IIN (ON)
4. I CC
5. t
t
ON, OFF
Note 1: Pulse Width 50 µs, Duty Cycle 10%
Output Impedance 50 Ω, t ≤ 5 ns, t ≤ 10 ns
r
f
Note 2: C includes probe and jig capacitance.
L
PRECAUTIONS for USING
This IC does not include built-in protection circuits for excess current or overvoltage.
If this IC is subjected to excess current or overvoltage, it may be destroyed.
Hence, the utmost care must be taken when systems which incorporate this IC are designed.
Utmost care is necessary in the design of the output line, V , and GND line since IC may be destroyed due to
CC
short−circuit between outputs, air contamination fault, or fault by improper grounding.
3
2004-01-30
TD62381PG/FG
4
2004-01-30
TD62381PG/FG
5
2004-01-30
TD62381PG/FG
PACKAGE DIMENSIONS
DIP18-P-300-2.54D
Unit: mm
Weight: 1.47 g (Typ.)
6
2004-01-30
TD62381PG/FG
PACKAGE DIMENSIONS
SOP18-P-375-1.27
Unit: mm
Weight: 0.41 g (Typ.)
7
2004-01-30
TD62381PG/FG
About solderability, following conditions were confirmed
• Solderability
(1) Use of Sn-63Pb solder Bath
· solder bath temperature = 230°C
· dipping time = 5 seconds
· the number of times = once
· use of R-type flux
(2) Use of Sn-3.0Ag-0.5Cu solder Bath
· solder bath temperature = 245°C
· dipping time = 5 seconds
· the number of times = once
· use of R-type flux
RESTRICTIONS ON PRODUCT USE
030619EBA
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• The products described in this document are subject to the foreign exchange and foreign trade laws.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
8
2004-01-30
相关型号：
TD62382AF-EL
IC 0.04 A 8 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO18, 0.375 INCH, 1.27 MM PITCH, PLASTIC, SOP-18, Peripheral Driver
TOSHIBA
TD62382AF-TP1
IC 0.04 A 8 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO18, 0.375 INCH, PLASTIC, SOP-18, Peripheral Driver
TOSHIBA
TD62382AFN-ER
IC 0.04 A 8 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO18, 0.225 INCH, PLASTIC, SSOP-18, Peripheral Driver
TOSHIBA
TD62382AFN-TP2
IC 0.04 A 8 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO18, 0.225 INCH, PLASTIC, SSOP-18, Peripheral Driver
TOSHIBA
TD62382APG
IC 0.04 A BUF OR INV BASED PRPHL DRVR, PDIP18, 0.300 INCH, 2.54 MM PITCH, LEAD FREE, PLASTIC, DIP-18, Peripheral Driver
TOSHIBA
TD62382F-EL
IC 0.04 A 8 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO18, 0.375 INCH, PLASTIC, SOP-18, Peripheral Driver
TOSHIBA
TD62382F-TP2
IC 0.04 A 8 CHANNEL, BUF OR INV BASED PRPHL DRVR, PDSO18, 0.375 INCH, PLASTIC, SOP-18, Peripheral Driver
TOSHIBA
©2020 ICPDF网 联系我们和版权申明