概述
数据手册TK40J20D 概述
Switching Voltage Regulators 开关稳压器
TK40J20D 数据手册
通过下载TK40J20D数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载TK40J20D
MOSFETs Silicon N-Channel MOS (π-MOS)
TK40J20D
1. Applications
•
Switching Voltage Regulators
2. Features
(1) Low drain-source on-resistance: RDS(ON) = 0.0374 Ω (typ.)
(2) Low leakage current: IDSS = 10 µA (max) (VDS = 200 V)
(3) Enhancement mode: Vth = 1.5 to 3.5 V (VDS = 10 V, ID = 1 mA)
3. Packaging and Internal Circuit
1: Gate (G)
2: Drain (D)(Heatsink)
3: Source (S)
TO-3P(N)
4. Absolute Maximum Ratings (Note) (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Rating
200
Unit
V
Drain-source voltage
VDSS
Gate-source voltage
Drain current (DC)
VGSS
ID
±20
(Note 1)
(Note 1)
40
A
Drain current (pulsed)
Power dissipation
IDP
PD
160
260
435
(Tc = 25)
W
Single-pulse avalanche energy
(Note 2)
EAS
mJ
Avalanche current
(Note 3)
(Note 1)
IAR
IDR
40
40
A
Reverse drain current (DC)
Reverse drain current (pulsed)
Channel temperature
(Note 1)
IDRP
Tch
160
150
Storage temperature
Tstg
-55 to 150
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
2011-09-27
Rev.1.0
1
TK40J20D
5. Thermal Characteristics
Characteristics
Symbol
Max
Unit
Channel-to-case thermal resistance
Channel-to-ambient thermal resistance
Rth(ch-c)
Rth(ch-a)
0.481
50
/W
Note 1: Ensure that the channel temperature does not exceed 150.
Note 2: VDD = 50 V, Tch = 25 (initial), L = 0.43 mH, RG = 25 Ω, IAR = 40 A
Note 3: Repetitive rating; pulse width limited by maximum channel temperature
Note: This transistor is sensitive to electrostatic discharge and should be handled with care.
2011-09-27
Rev.1.0
2
TK40J20D
6. Electrical Characteristics
6.1. Static Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Gate leakage current
Symbol
Test Condition
Min
Typ.
Max
Unit
IGSS
IDSS
VGS = ±20 V, VDS = 0 V
±1
10
µA
Drain cut-off current
VDS = 200 V, VGS = 0 V
Drain-source breakdown voltage
Gate threshold voltage
V(BR)DSS ID = 10 mA, VGS = 0 V
200
1.5
V
Vth
VDS = 10 V, ID = 1 mA
VGS = 10 V, ID = 20 A
3.5
Drain-source on-resistance
RDS(ON)
0.0374 0.044
Ω
6.2. Dynamic Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Input capacitance
Symbol
Test Condition
Min
Typ.
Max
Unit
pF
Ciss
Crss
Coss
rg
VDS = 100 V, VGS = 0 V, f = 1 MHz
4300
30
Reverse transfer capacitance
Output capacitance
280
5.2
Gate resistance
VDS = OPEN, f = 1 MHz
See Figure 6.2.1.
Ω
Switching time (rise time)
Switching time (turn-on time)
Switching time (fall time)
Switching time (turn-off time)
tr
100
160
85
ns
ton
tf
toff
510
Fig. 6.2.1 Switching Time Test Circuit
6.3. Gate Charge Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Qg
Test Condition
Min
Typ.
100
Max
Unit
nC
Total gate charge (gate-source plus
gate-drain)
VDD ≈ 160 V, VGS = 10 V, ID = 40 A
Gate-source charge 1
Gate-drain charge
Qgs1
Qgd
17
33
6.4. Source-Drain Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Diode forward voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
VDSF
trr
IDR = 40 A, VGS = 0 V
-1.7
V
Reverse recovery time
IDR = 40 A, VGS = 0 V
240
ns
-dIDR/dt = 100 A/µs
Reverse recovery charge
Qrr
Irr
2.2
18
µC
Peak reverse recovery current
A
2011-09-27
Rev.1.0
3
TK40J20D
7. Marking (Note)
Fig. 7.1 Marking
Note: A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on
the restriction of the use of certain hazardous substances in electrical and electronic equipment.
2011-09-27
Rev.1.0
4
TK40J20D
8. Characteristics Curves (Note)
Fig. 8.1 ID - VDS
Fig. 8.3 ID - VGS
Fig. 8.5 |Yfs| - ID
Fig. 8.2 ID - VDS
Fig. 8.4 VDS - VGS
Fig. 8.6 RDS(ON) - ID
2011-09-27
Rev.1.0
5
TK40J20D
Fig. 8.7 RDS(ON) - Ta
Fig. 8.8 IDR - VDS
Fig. 8.9 C - VDS
Fig. 8.10 Vth - Ta
Fig. 8.11 PD - Tc
Fig. 8.12 Dynamic Input/Output Characteristics
(Guaranteed Maximum)
2011-09-27
Rev.1.0
6
TK40J20D
Fig. 8.13 rth/Rth(ch-c) - tw
(Guaranteed Maximum)
Fig. 8.14 Safe Operating Area
(Guaranteed Maximum)
Fig. 8.15 EAS - Tch
(Guaranteed Maximum)
Fig. 8.16 Test Circuit/Waveform
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
2011-09-27
Rev.1.0
7
TK40J20D
Package Dimensions
Unit: mm
Weight: 4.6 g (typ.)
Package Name(s)
JEITA: SC-65
TOSHIBA: 2-16C1S
Nickname: TO-3P(N)
2011-09-27
Rev.1.0
8
TK40J20D
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product
is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/
or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact
("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace
industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment,
equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and
equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange
and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology
are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
2011-09-27
Rev.1.0
9
TK40J20D 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| TK40J60T | TOSHIBA | Field Effect Transistor Silicon N Channel MOS Type (DTMOS) | 获取价格 |
|
| TK40J60T(F) | TOSHIBA | 暂无描述 | 获取价格 |
|
| TK40J60T(Q) | TOSHIBA | MOSFET N-CH 600V 40A SC-65 | 获取价格 |
|
| TK40J60U | TOSHIBA | Switching Voltage Regulators | 获取价格 |
|
| TK40J60U(F) | TOSHIBA | 暂无描述 | 获取价格 |
|
| TK40J60U(Q) | TOSHIBA | TRANSISTOR,MOSFET,N-CHANNEL,600V V(BR)DSS,40A I(D),TO-247VAR | 获取价格 |
|
| TK40M60U | TOSHIBA | Switching Voltage Regulators | 获取价格 |
|
| TK40P03M1 | TOSHIBA | DC-DC Converters | 获取价格 |
|
| TK40P03M1 | FREESCALE | MOSFETs Silicon N-Channel MOS (U-MOSî±-H) | 获取价格 |
|
| TK40P04M1 | FREESCALE | MOSFETs Silicon N-Channel MOS (U-MOSî±-H) | 获取价格 |
|
TK40J20D 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
