TL21W02-DT34 [TOSHIBA]

LED lamps; LED灯


型号：	TL21W02-DT34
厂家：	TOSHIBA
描述：	LED lamps LED灯
文件：	总9页 (文件大小：237K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TENTATIVE

TL21W02-D(T34

・本資料は、製品の紹介を目的とした技術検討資料です。最終仕様段階で特性内容

の変更を伴う場合もあります。製品設計を行う場合は、営業部門に最終仕様を

ご確認頂けます様お願い致します。

・本資料の第三者への開示は、行わないようお願い致します。

・This material is technological examination material to aim at the product

introduction. The change in the content of the characteristic might

be accompanied at the final specification process. The final specification

will be able to be gotten in the brokerage department when the product is

designed and to get the confirmation.

・Please do not open this material to the third person.

Marktech

Optoelectronics

For part availability and ordering information please call Toll Free: 800.984.5337

Website: www.marktechopto.com | Email: info@marktechopto.com

2011-04-07

WL-0746

TENTATIVE

TL21W02-D(T34

TOSHIBA LED lamps

TL21W02-D(T34

○Surface-mount devices

•

2.1 (L) mm × 2.5 (W) mm × 0.65 (H ) mm size

Unit: mm

High luminous flux LED: 48 lm(typ.) @IF=150 mA

Color: white (6500K)

2.5

Reflow-soldering is available

Applications : general lighting and etc.

Color and Material

Part Number

TL21W02-D

Color

Material

InGaN

(0.3)

White (6500K)

Absolute Maximum Ratings (Ta = 25°C)

(Note.1)

Characteristics

Symbol

Rating

Unit

1.55

0.45

Forward Current (Note.2)

Pulse current (Note.3)

Power Dissipation

(180)

(300)

1. CATHODE

2. ANODE

0.76

Operating Temperature

Storage Temperature

Junction Temperature

−40 to 100

120

°C

opr

JEDEC

JEITA

―

stg

TOSHIBA

4-2J1

Note 1: Using continuously under heavy loads (e.g. the application of high

temperature/current/voltage and the significant change in

temperature, etc.) may cause this product to decrease in the

Weight: ***** g (typ.)

reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within

the absolute maximum ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/”Derating Concept and Methods”) and individual reliability data (i.e. reliability test report

and estimated failure rate, etc).

Note 2: The junction-to-ambient thermal resistance, Rth(j-a), should be kept below 70℃/W so that the TL21W02-D(T34 is

not exposed to a condition beyond the absolute maximum ratings. Rth(j-a): Thermal resistance from the LED

junction to ambient temperature

– Ta

200

180

160

140

120

100

Rth(j-a)=70℃/W

20 40

100

120

Ambient temperature Ta (°C)

Note 3: Pulse width 10ms, Duty 1/10

2011-04-07

WL-0746

For part availability and ordering information please call Toll Free: 800.984.5337

Website: www.marktechopto.com | Email: info@marktechopto.com

Marktech

Optoelectronics

TENTATIVE

TL21W02-D(T34

Electrical Characteristics (Ta = 25°C)

Characteristics

Symbol

Test condition

=150 mA

Min

Typ.

Max

Unit

Forward Voltage (Note 4)

Reverse Voltage

(2.9)

⎯

(3.25)

0.75

(20)

(3.8)

⎯

I = 1 mA

Thermal Resistance (Note 5)

Rth(j-s)

= 150 mA

⎯

°C/W

Note 4: V rank classification

The specification on the following table is used for V classification of LEDs in Toshiba facility.

Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.

Ta=25°C

Tolerance: +/-0.1V

Forward Voltage

Part Number

Min

(2.9)

2.9

Typ.

(3.25)

⎯

Max

(3.8)

TL21W02-D(T34

3.2

3.5

3.8

150

3.2

⎯

3.5

⎯

Unit

Note 5: Rth(j-s): Thermal resistance from the LED junction to solder point.

Optical Characteristics (Ta = 25°C)

Characteristics

Chromaticity

Symbol

Test condition

Min

Typ.

Max

Unit

= 150 mA

(Note 6)

6500

⎯

Color temperature

Luminous flux (Note 7)

CCT

Φ_V

⎯

(30.3)

⎯

(60.5)

⎯

(48)

⎯

Color rendering index

Note 6: Chromaticity classification

The product is classified at the following chromaticity coordinate groups.

Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.

Test conditions: I =150 mA, Ta=25°C

Tolerance: ±0.01

0.3048

0.3130

0.3144

0.3068

0.3028

0.3115

0.3130

0.3048

0.3115

0.3205

0.3213

0.3130

0.3213

0.3221

0.3144

0.3207

0.3290

0.3186

0.3113

0.3304

0.3391

0.3290

0.3207

0.3391

0.3481

0.3373

0.3290

0.3373

0.3261

0.3186

0.37

0.36

0.35

0.34

0.33

0.32

0.31

0.30

0.29

6000K

6500K

7000K

ANSI C78.377

0.29

0.30

0.31

0.32

0.33

0.34

2011-04-07

WL-0746

TENTATIVE

TL21W02-D(T34

Note 7: Φ_Vrank classification

The specification on the following table is used for F classification of LEDs in Toshiba facility.

Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.

Ta=25°C

Tolerance: +/-10%

Luminous flux

Φ_V

Max

Part Number

Min

(30.3)

30.3

36.0

42.8

51.0

Typ.

(48)

⎯

TL21W02-D(T34

(60.5)

36.0

42.8

51.0

60.5

C16

150

C17

C18

C19

⎯

Unit

Note 8: Color Rendering Index

Measurement tolerance : +/- 5

Cautions

• The product is sensitive to electrostatic and care must be fully taken when handling products. Particularly in

the case that an over-voltage shall be applied, the overflowed energy may cause damage to or possibly result in

destruction of the product. Users shall take absolutely secure countermeasures against electrostatic and surge

when handling the product.

• This product is designed as a general display light source usage, and it has applied the measurement standard

that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional

application (ex. Light source for sensor, optical communication and etc) except general display light source.

•

Please note the handling of products during evaluation.

1. Please do not apply pressure to the upper surface of the product with finger, tweezers, and others. Failure of

product to light up may occur due to package deformation, wire deformation and/or disconnection.

2. Should tweezers be used in product handling, one with flat surfaces is recommended.

3. Please handle the product widthwise.

4. Please do not drop the product. There is a possibility for package transformation etc. to occur when the product

is dropped.

5. Please do not stack the Printed Circuit Boards on which the product is mounted to prevent damages to product

surface. Also, please note not to damage the surface of the product with cushioning material etc. Surface

damage to the product may influence their optical characteristics.

2011-04-07

WL-0746

TENTATIVE

TL21W02-D(T34

Packaging

This LED device is packed in an aluminum envelope with a silica gel and a moisture indicator to avoid moisture

absorption. The optical characteristics of the device may be affected by exposure to moisture in the air before

soldering and the device should therefore be stored under the following conditions:

1. This moisture proof bag may be stored unopened within 12 months at the following conditions.

Temperature: 5°C~30°C

Humidity: 90% (max)

2. After opening the moisture proof bag, the device should be assembled within 168 hours in an environment of

5°C to 30°C/60% RH or below.

3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to

pink) or the expiration date has passed, the device should be baked in taping with reel.

After baking, use the baked device within 72 hours, but perform baking only once.

Baking conditions: 60±5°C, for 24 to 48 hours.

Expiration date: 12 months from sealing date, which is imprinted on the label affixed.

4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting.

5. If the packing material of laminate would be broken, the hermeticity would deteriorate. Therefore, do not

throw or drop the packed devices.

Mounting Method

Soldering

•

Reflow soldering (example)

Temperature profile for Pb soldering (example)

Temperature profile for Pb-free soldering (example)

(*)

10 s max

5 s max

(*)

240°C max

260°C max

(*)

4°C/s max

max(*)

140~160°C

230°C

150~180°C

(*)

4°C/s max

(*)

4°C/s max

max(*)

60~120 s

max(*)

60~120 s

30~50s max(*)

Time (s)

•

The product is evaluated using above reflow soldering conditions. No additional test is performed exceed the

condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under

the above conditions.

•

Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of

opening the package.

Second reflow soldering

In case of second reflow soldering should be performed within 168 h of the first reflow under the above

conditions. Storage conditions before the second reflow soldering: 30°C, 60% RH (max)

•

When any soldering corrections are made manually,a hot-plate should be used and do not use soldering iron.

(only once at each soldering point)

Do not perform wave soldering.

Land pattern dimensions for reference only

0.3

Unit : mm

1.55

0.45

2011-04-07

WL-0746

TENTATIVE

TL21W02-D(T34

Cleaning

When cleaning is required after soldering, Toshiba recommends the following cleaning solvents.

It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the

recommended conditions). In selecting the one for your actual usage, please perform sufficient review

on washing condition, using condition and etc.

ASAHI CLEAN AK-225AES

KAO CLEAN TROUGH 750HS

PINE ALPHA ST-100S

: (made by ASAHI GLASS)

: (made by KAO)

: (made by ARAKAWA CHEMICAL)

Precautions when Mounting

Do not apply force to the plastic part of the LED under high-temperature conditions.

To avoid damaging the LED plastic, do not apply friction using a hard material.

When installing the PCB in a product, ensure that the device does not come into contact with other components.

Tape Specifications

1. Product number format

The type of package used for shipment is denoted by a symbol suffix after the product number. The

method of classification is as below. (this method, however does not apply to products whose electrical

characteristics differ from standard Toshiba specifications)

(1) Tape Type: T34 (8-mm pitch)

(2) Example

TL21W02-D

(T34

Tape type

Toshiba product No.

2. Tape dimensions

Unit: mm

Tolerance

Symbol

Dimension

Tolerance

Symbol

Dimension

1.5

1.75

4.0

+0.1/−0

±0.1

2.0

8.0

±0.05

±0.2

±0.1

±0.05

±0.1

8.0

0.3

±0.05

±0.1

(2.4)

(2.8)

0.8

3.5

1.1

極性

2011-04-07

WL-0746

TENTATIVE

TL21W02-D(T34

3. Reel dimensions

Unit: mm

9 +1/−0

11.4 ± 1.0

φ44

2 ± 0.5

4. Leader and trailer sections of tape

40 mm or more

Leading part: 190 mm (min)

2011-04-07

WL-0746

TENTATIVE

TL21W02-D(T34

5. Packing form

(1) Packing quantity

Reel

1,000 pcs

5,000 pcs

Carton

(2) Packing form: Each reel is sealed in an aluminum pack with silica gel.

6. Label format

(1) Example : TL21W02-D(T34

P/N:

TOSHIBA

TYPE

ADDC

TL21W02-D(T34

xxx

Q’TY

1,000 pcs

xxxx

xxx

xxxxxx

(xxxxx)

xxxxxxxx

xxxxxxxxxx

⁷⁾Use under 5-30degC/60%RH within 168h

SEALED:

DIFFUSED IN xxxxx

ASSEMBLED IN xxxxx

[[G]]/RoHS COMPATIBLE

*Y380xxxxxxxxxxxxxxxxxx*

(1)-1 Contents about Note section (Each example means the contents are different for each lot.)

Information for Toshiba use

Information for customers use

1) Lot code

4) Management code

Example: 2707C2B

2) Key code

Example: 015 32G

5) Packing quantity

Example: 12345

3) Rank symbol

Example: 1AC182

Example: 1000

6) Product information (refer to section (1)-2)

Exxxx

7) Storage condition after opening

Use under 5-30 degC/60%RH within 168h

(1)-2 Explanations for “ADDC” and “Product information”

ADDC Product information

(L1 xxx

(L2 xxx

Assembled in domestic :

Assembled in overseas :

(2) Label location

•

Reel

• Carton

Tape feel direction

Label position

•

The aluminum package in which the reel is supplied also has the label attached to

center of one side.

2011-04-07

WL-0746

TENTATIVE

TL21W02-D(T34

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively “Product”) without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.

Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the

Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of

all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes

for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the

instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their

own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such

design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,

diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating

parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR

APPLICATIONS.

•

Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring

equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.

Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or

reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious

public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used

in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling

equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric

power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this

document.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without

limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile

technology products (mass destruction weapons). Product and related software and technology may be controlled under the

Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product

or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of

noncompliance with applicable laws and regulations.

2011-04-07

WL-0746

TL21W02-DT34 [TOSHIBA]

相关型号：

TL21W02-L

TL21W02-L1

TL21W02-L1T34

TL21W02-LL1

TL21W02-LL1T34

TL21W02-LT34

TL21W02-N

TL21W02-N1

TL21W02-N1T34

TL21W02-NT34

TL21W02D

TL21W02D1