TLGU27C [TOSHIBA]
Visible LED, SINGLE COLOR LED;型号: | TLGU27C |
厂家: | TOSHIBA |
描述: | Visible LED, SINGLE COLOR LED 光电 |
文件: | 总44页 (文件大小:1321K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LED Lamps
PRODUCT GUIDE
✽✽Toshiba Visible LED Lamp Family Outline
LED Lamp Family 299 products
High-blightness lead type: 231 products
• TL✽H Series
• TL✽E Series
• TL✽U Series
✽✽
InGaA P
products are mainly from the World’s highest
luminosity level “TL✽H Series” to general-purpose “TL✽U Series”
✽✽Stopper lead type and straight lead type available. (for ø5-mm type
only)
Suffix “P” indicates straight or stopper type.
(example: TL✽E16TP is straight type.)
Surface-mount devices (SMDs): 68 products
• TL✽H Series
• TL✽E Series
• TL✽U Series
• S4F42✽ Series
• S4F43✽ Series
✽✽Package size: 1.6 x 0.8 mm
2.0 x 1.25 mm
3.2 x 2.4 mm (ø2 lens-top)
3.2 x 2.8 mm (flat type / ø3 lens-top)
✽✽Four-element (
) chip LEDs enable construction of low power
InGaA P
dissipation equipment.
✽✽Wider operating range: Topr =
—
40°C to 100°C
ꢀ(TL✽1100 Series, TL✽1102 Series, S4F42✽ Series, S4F43✽ Series)
Related catalog on website
The following related catalog are also published on the website.
“LED Lamps Application Guide”
http://doc.semicon.toshiba.co.jp/noseek/us/buct/bcfm.htm
3
New Product Digest
1
1. New TL✽H Series (Ultra-High-Brightness ø5-mm LED Lamp Series)
Using thin-film crystal growth technology to produce the ultra-bright light-emitting material
process and structure. Toshiba has developed a new line-up of
, as well as a new
InGaA P
ultra-bright LED lamps.
InGaA P
These new LED lamps emit ultra-bright light. Higher brightness can be achieved at high temperature owing to an
improved derating characteristic. The new series is effective in various applications such as outdoor LED information
panels, high-brightness indications and backlighting for displays.
ꢀFeatures
✽✽A brightness approximately 1.3 times that of the existing high-brightness
TL✽H
InGaA P
Series of LED lamps can be achieved (comparison conditions: I = 20 mA, Ta = 25°C,
F
same radiation pattern)
✽✽Sufficient current can be obtained, even at high temperature, owing to an improved derat-
ing characteristic. Thus, at Ta = 50°C, brightness is approximately double that of the
existing TL✽H Series.
✽✽High-brightness emission can be achieved even at low-current drive. Lowering the drive
current reduces product power dissipation.
✽✽Four types of ø5-mm lens with various radiation patterns are available.
Derating Characteristics
ꢀUses
60
50
40
30
20
10
LED information panels, indicators
NEW H Series
The package specification in the product number for new TL✽H Series
is now given as two digits instead of three as at present.
Existing H Series
-40
-20
0
20
40
60
80 100
120
Ambient Temperature Ta (°C)
2. TLRME68TG Series (Round ø3-mm InGaA P LED Lamps Which Can Be
Mounted Flush with PCB Using Surface Mounter)
When products are selected for use in equipment, mountability is a key factor. Most devices are now mounted using
a high-speed surface mounter.To comply with this requirement, Toshiba has introduced a series of ø3-mm LED
InGaA P
, suitable for both
lamps which can be mounted flush with a PCB using a surface mounter. High-brightness
indoor and outdoor applications, is used as the emitting substance.
InGaA P
These new LED lamps can be used in a wide range of applications, such as LED information panels, low-power-
consumption indicators and high-brightness backlighting for displays.
ꢀFeatures
✽✽Can be mounted flush with a PCB using a surface mounter.
This enables reduction in assembly costs and time, reduction in height of finished prod-
uct, and reduction of risk of damage due to finished products shifting during transporta-
tion.
✽✽High-brightness
LEDs used
InGaA P
✽✽Transparent packages with wide viewing angle
✽✽Emitted colors: red (626 nm and 613 nm), yellow and green
✽✽Superior derating characteristics enable excellent high-brightness emission in high-
temperature environments.
✽✽Because high-brightness emission can be low, resulting in low power
Derating Characteristics
consumption by the equipment as a whole.
Solid line: TLRME68TG,TLYE68TG,TLGE68TG
Dotted line: TLSU268G
ꢀ Uses
50
40
30
20
10
0
Display light sources, information display boards, light sources for back-
lighting
-
40
-20
0
20
40
60
80 100
120
Ambient Temperature Ta (°C)
4
3. TLFGE / TLPYE Series with New Colors
Toshiba has added to its LED product line-up the TLFGE Series (of a color between those of the existing TLPGE and
TLGE Series) and the TLPYE Series (of a color between those of the existing TLGE and TLYE Series). High-bright-
ness
, widely used in both indoor and outdoor applications, is used as the light-emitting material.
InGaA P
ꢀFeatures
✽✽High-brightness
LED
InGaA P
✽✽Emitted colors: TLFGE Series (fresh green): λd = 565 nm (typ.)
TLPYE Series (pure yellow): λd = 580 nm (typ.)
✽✽High-brightness even at high temperature owing to improved derating characteristic
✽✽High-brightness emission even at low-current drive. Product power dissipation can be
reduced.
✽✽Four types of ø5-mm and ø3-mm lens with various radiation patterns are available.
Select a lens according to the intended application.
Derating Characteristics
ꢀUses
I —Ta
F
80
60
40
Display light sources, information display boards, light sources for
backlighting
20
0
0
20
40
60
80
100
120
Ambient Temperature Ta (°C)
4. TLGU / TLPGU Series
Toshiba now offers a lead-type green U series. A brightness approximately five to eight times that of the Toshiba
general-purpose medium-brightness Series (which uses GaP as the light-emitting material) can be achieved. High-
brightness
, widely used in both indoor and outdoor applications, is used as the light-emitting material.
InGaA P
ꢀFeatures
✽✽High-brightness
LED
InGaA P
✽✽Emitted colors: TLGU Series (green): λd = 571 nm
TLPGU Series (pure green): λd = 558 nm
✽✽High-brightness even at high temperature owing to improved derating characteristic
✽✽20 types of green and pure-green ø5-mm and ø3-mm oval lens with various radiation pat-
terns are available.
Select a lens according to the intended application.
ꢀUses
Display light sources, information display boards, panel indicators
5
Overview
2
1. Features
Toshiba LED lamps feature higher brightness, multiple colors and many types of package.
Select LEDs for your applications as appropriate.
Lead type
ꢀꢀColors are from red to pure green (total 10 colors).
ꢀꢀLine-up of four-element ( ) compound semiconductors allows outdoor use.
InGaA P
ꢀꢀMany types of package enable the user to select LED lamps to suit his or her application.
SMD type
ꢀꢀMiniature surface mount, upper-face emitting type
ꢀꢀA wide product line-up by high luminosity four-element (
) emitted-light devices
InGaA P
ꢀꢀCan be used in automatic mounting.
ꢀꢀSuitable for reflow soldering
ꢀꢀStandard 1.6 x 0.8 mm type and 2 x 1.25 mm type
The original ø2-mm lens-top type suitable for thin profile applications not possible with conventional lead
type LEDs
Select the best device for your own particular application.
ꢀꢀLine-up of high-heat resistance type
Suitable for use in automobile backlight sorce
2. Uses
Lead type
Light-emitting display
Traffic light
CHMSL
(Center High Mounted Stop Lamp)
Message board
Security equipment
SMD type
Thin-electronic bulletin board
Handy camera
OA equipment
Accessaries on dashboard
FA equipment
(Programable control, etc.)
Home/cellular telephone
AV equipment
(Karaoke set, etc.)
6
3. Merits of Four-Element High-Brightness LED Lamps
What are four-element LEDs?
These are composite semiconductor devices made up of four elements (In, Ga, A and P). High-intensity
emissions are possible from pure green to red, using the same materials and the same crystal growth method.
Compared to other materials, these materials offer extremely high efficiency light emission in LEDs.
Wide market size for four-element LEDs
Four-element product lines
cd
10
1
Ultra-high-brightness is
the highest level of
luminosity available
Traffic &
pedestrian
lights
TLꢀH Series
High-brightness lead-type
Surface-mount type
CHMSL /
High-brightness luminosity
Indicator lights
for controls
TLꢀE Series
High-brightness lead-type
Surface-mount type
High-brightness luminosity
Electronic bulletin boards
Portable devices
TLꢀU Series
High-brightness lead-type
Surface-mount type
0.1
Low-power /
General-purpose
LEDs
Low-end
General-purpose LEDs
Household appliances / PCs / AVs
CHMSL: center high mounted stop lamp
Market Size
Merits of high-brightness LEDs
1. Higher visibility: Visibility is improved in the daytime or in bright environments.
Operating status is clear from a distance.
2. Low power dissipation: LED current and circuit power dissipation is reduced compared to these for
general-purpose LEDs with the same brightness.
3. Fewer devices required: Number of LEDs needed for backlighting or for multiple LED applications is
reduced. Cost of mounting components also reduced.
4. Higher reliability: Product life is prolonged by reduced LED current.
High brightness
(low power consumption)
Four-
element LEDs
(InGaA P—LEDs)
Low price relative
High reliability
to luminance
7
Overview
2
Comparison between four-element high-brightness LED lamps and general-purpose brightness LEDs
In designing sets that achieve the same luminous intensity through a four-element high-brightness LED lamp as
through a general-purpose brightness LED lamp, the use of the four-element high-brightness LED lamp reduces
the power dissipation by approximately 90%. (Toshiba internal comparison.)
(1) Lead type
Comparison: (general-purpose LED) TLO163
10° ← Viewing angle
(high-brightness) TLOH160,TLOE160A
10°
10° ← Viewing angle
ꢀꢀTypical Luminous Intensity Comparison
TLOH160
7000
TLOE160A
When the required luminance for the equipment is 40 mcd
1000
Four-element (TLOE160A)
General-purpose (TLO163)
20 mA
Drive current
1.7 mA
8.5 mW
100
10
Power
consumption
TLO163
100 mW
When a LED lamp is used at 5 V.
Reduction in power consumption of
around 91
%
20
40 50
2
4
6
10
Forward Current IF (mA)
(2) SMD type
ꢀꢀFour-element LEDs vs. General-purpose LEDs
Example: TLOU1002A vs. TLO1002
General-purpose
Four-element
ꢀꢀTypical Luminous Intensity Comparison
When the required luminance for the equipment is 10 mcd
200
TLOU1002A
(four-element)
100
Four-element
General-purpose
50
Drive current
Required
luminance
2.4 mA
12 mW
23 mA
20
10
5
TLO1002
(general-purpose)
Power
consumption
115 mW
When a LED lamp is used at 5 V.
Reduction in power consumption of
2
1
1
2
5
10
20
50
around 90
%
Forward Current IF (mA)
8
4. About the Toshiba InGaA P LED Lamps
Toshiba are now offering a line-up consisting of several types of unpackaged InGaA P LED chip, allowing the most
appropriate device to be selected for the job at hand. An overview of the line-up is given below.
Note that the comparisons are made under the following conditions: I = 20 mA, Ta = 25°C.
F
New H
Series
TLOHꢀꢀ
TLSHꢀꢀ
TLYHꢀꢀ
TLRMHꢀꢀꢀ
New TLꢀE
TLOEꢀꢀ
TLYEꢀꢀ
TLPYEꢀꢀ
TLGEꢀꢀ
TLFGEꢀꢀ
TLPGEꢀꢀ
TLSEꢀꢀ
Series
TLRMEꢀꢀ
TLREꢀꢀ
λd
558 nm 565 nm 571 nm 580 nm
Green
587 nm
Yellow
605 nm
Orange
613 nm
626 nm
Red
630 nm
5. Emitted-Light Colors and Materials
Color Symbol
(High-brightness series)
Peak Emission
Wavelength (typ.) λp (nm)
Emitted-Light Color
Emitted-Light Material
Dominant λd (nm)
644
636
636
623
612
596
590
583
574
568
562
630
626
623
613
605
592
587
580
571
565
558
RH / RE
RMH / RME
SU
InGaA P
InGaA P
InGaA P
InGaA P
InGaA P
InGaA P
InGaA P
InGaA P
InGaA P
InGaA P
InGaA P
Red
SH / SE
OH / OE / OU
AU
Orange
Amber
YH / YE / YU
PYE
Yellow
Green
GE
FGE
PGE
Main Products Typical Spectrum
TLYH
TLYE
TLOH
TLOE
TLOU
TLSH
TLSE
TLRH
TLRE
TLPGE
TLGE
TLPGU TLFGE TLGU TLPYE TLYU TLAU
TLSU
1.0
0.8
0.6
0.4
0.2
0
500
700
800
600
Wavelength λ (mm)
For more details, please refere to each technical data sheet.
9
Overview
2
6. Product Number Format
Lead Type I (Three digits type)
Product type is determined by color symbol and package type number.
Example: TLRE156AP
This indicates that the product
belongs to the high-brightness
RE Series, has the package
number 156A and is of straight
lead type.
Product
number:
TL
ꢀ
ꢀꢀ
Package number (numbers: three digits)
Color symbol (letter)
Example: TLSU113
This indicates that the product
belongs to the SU Series, has the
package number 113 and has a
lead stopper.
Toshiba LED
ꢀꢀꢀ Change code
ꢀꢀ Straight lead type without a lead stopper is indicated by the suffix P
which is added at the end of the product number
(only applicable to products 5 mm or more in diameter).
G: Mount flush with PCB.
Lead Type II (Two digits type)
Product type is determined by color symbol and package type number.
Example: TLRME68TG
This indicates that the product
belongs to the high-brightness
RME Series, has the package
number 68 and has a transpar-
ent, mount flush with PCB type
led lamp.
Product
number:
TL
ꢀ
ꢀꢀ
Package number (numbers: two digits)
Color symbol (letter)
Toshiba LED
ꢀ
Resin type T: Transparent, C: Colored and transparent, D: Colored and diffusing, M: Milky-white and diffusing
ꢀꢀ Straight lead type without a lead stopper is indicated by the suffix P which is added at the end of the product number
(only applicable to products 5 mm or more in diameter).
G: Mount flush with PCB.
SMD Type
Product type is determined by color symbol and package type number.
Example: TLYU1008A(T04)
This indicates that the product
belongs to the high-brightness YU
Series, has the package number
1008A and has T04 tape packing
specifications.
Product
number:
TL
(T )
Tape packing specifications
Change code (letter)
Package number (4 digits)
Color symbol (letter)
Toshiba LED
10
7. Lead-Type Luminous Intensity Classification Table
Rank
M
N
Luminous Intensity (mcd)
56~112
Rank
A
Luminous Intensity (mcd)
0.1~0.2
100~200
B
0.18~0.36
0.32~0.64
0.56~1.12
1.0~2.0
P
180~360
C
Q
R
320~640
D
560~1,120
E
S
1,000~2,000
1,800~3,600
3,200~6,400
5,600~11,200
10,000~20,000
18,000~36,000
32,000~64,000
F
1.8~3.6
T
G
H
3.2~6.4
The table to the left provides of
high-brightness LED lamp series as
common criterion for luminous
intensity classification.
U
5.6~11.2
10~20
V
J
W
X
K
18~36
L
32~64
Measurement tolerance for each
Y
±
limit is 15%.
Luminous Intensity Classification Format (Lead type)
Example:
This example shows that the product is a
TLYH180P of ranks U and V.
TLYH180P (UV)
Rank-classified products include two ranking
levels as standard.
Product number
Rank symbol
8. Lens Color and Appearance
Lens Type
Transparent
Milky white, Diffusing
Colored, Transparent
Colored, Diffusing
Appearance
The colored lens type is using the luminescence color.
11
Overview
2
9. Pulse Drive
Since the allowable forward pulse current varies with IF max, please refer to the graphs of allowable forward pulse
current ratings. Note also that pulse drive requires derating with respect to the ambient temperature, as does DC
drive.
Allowable
forward pulse
current rating
Allowable Forward
Pulse Current
IFPmax (Note 2)
(mA)
DC Forward
IF max
Characteristic
Curves
(mA)
(T = 25°C)
a
50
25
30
200
1
2
3
Note 1:
Pulse width Pw = 100 µs,
120
Duty ratio DR = 10-1
Characteristic curves (1)
Characteristic curves (2)
Characteristic curves (3)
Ta = 25°C
Pw = 10 µs
Ta = 25°C
Ta = 25°C
200
160
120
80
120
100
80
60
40
20
0
120
100
80
60
40
20
0
Pw = 10 µs
1 ms
Pw = 10 µs
1 ms
1 ms
5 ms
10 ms
20 ms
10 ms
20 ms
5 ms
5 ms
10ms
20ms
Allowable Range
Allowable Range
Allowable Range
40
0
10
—
—
—
1
3
2
10
10
Duty Ratio DR
1
—
—
—
—
—
—
1
3
2
1
3
2
10
10
10
Duty Ratio DR
1
10
10
10
1
Duty Ratio DR
10. General LED Characteristics
Absolute maximum rating
Absolute maximum ratings are the rated specifications which must
not be exceeded in any operating environment. Please check the
ratings for your intended product before designing a circuit.
0°
Radiation (viewing) angle
2θ1/
2
This parameter indicates the ratio of the LED's luminous intensity
to its axial luminous intensity (= 100%) as viewed from an angle of
θ with respect to the axis of the light source. The angle at which
luminous intensity is exactly 50% of the axial luminous intensity is
called the half-value angle θ 1/2. The half-value angle on both
sides of the axis is expressed as 2θ 1/2.
90°
90°
0
0.5
1
Relative luminosity
θ
Luminous intensity
The light-emitting diode is assumed to be a spot light source and
the luminous intensity is defined as the flux of light per unit solid
angle for that light source.
Viewing angle
The unit of luminous intensity is mcd.
This value is generally higher for the converging type of product
which has high directional sensitivity.
Temperature dependency of luminous intensity
Optical output power decreases as the ambient temperature rises
at a rate of approximately 1% per °C.
12
Product List for Lead Type
3
1. Electrical and Optical Characteristics
Toshiba produces an extensive product line of newly developed ultra-high-brightness red, orange, yellow, green
and pure green LEDs using InGaA P material and optimum lens design. Toshiba high-brightness LED lamps will
help you to choose the most suitable type for your application.
Type I (Three digits type)
Absolute Maximum Ratings
Electrical / Optical Characterostics
DC forward DC reverse
current voltage
Power
dissipation temperature
PD (mW)
Operating
Storage
temperature
Tstg (°C)
Standard emission wavelength characteristics (nm)
I (µA)
R
Forward voltage VF (V)
Reverse current
Series Name
Peak wave- Half width
Dominant
typ.
max
max
I
F (mA)
VR (V)
Topr (°C)
IF
(mA
)
VR (V)
IF (mA)
length λp
∆λ
wavelength
λ
d
TLRH Series
TLRMH Series
TLRE Series
TLSH Series
TLSE Series
TLSU Series
TLOH Series
TLOE Series
TLOU Series
TLYH Series
TLYE Series
TLYU Series
TLGE Series
TLPGE Series
50
50
50
50
50
30
50
50
30
50
50
30
50
50
4
4
4
4
4
4
4
4
4
4
4
4
4
4
125
125
125
125
125
72
–
30~85
–
–
–
–
–
40~120
40~120
40~120
40~120
40~120
—
1.9
2.5
20
20
20
20
20
20
20
20
20
20
20
20
20
20
50
50
50
50
50
50
50
50
50
50
50
50
50
50
4
4
4
4
4
4
4
4
4
4
4
4
4
4
644
636
644
623
623
636
612
612
612
590
590
590
574
562
18
20
18
15
15
17
15
15
15
13
13
13
11
11
630
626
630
613
613
623
605
605
605
587
587
587
571
558
20
20
20
20
20
20
20
20
20
20
20
20
20
20
–40~100
2.05 2.5
1.85 2.4
–
30~85
30~85
30~85
–
2.1
2.5
–
1.95 2.4
Note 1
2.0
2.1
2.4
2.5
125
125
72
–30~85
–
–
40~120
40~120
—
–30~85
1.95 2.4
Note 2
2.0
2.1
2.1
2.1
2.4
2.5
2.5
2.5
125
125
75
–30~85
–
–
40~120
40~120
—
–30~85
Note 3
140
140
–30~85
–
–
40~120
40~120
2.27 2.8
2.27 2.8
–30~85
* Some individual product specifications may differ from the series specifications given above. Please check the characteristics for each device.
Note 1: For operating and storage temperatures, please see page 14, 15.
Note 2: For operating and storage temperatures, please see page 18, 19.
Note 3: For operating and storage temperatures, please see page 20, 21.
Type II (Two digits type)
Electrical / Optical Characterostics
Absolute Maximum Ratings
DC forward DC reverse
Power
dissipation temperature
PD (mW)
Operating
Storage
temperature
Tstg (°C)
Standard emission wavelength characteristics (nm)
Forward voltage VF (V)
Reverse current
I (µA)
R
Series Name
current
IF (mA)
voltage
VR (V)
Peak wave- Half width
Dominant
typ.
max
max
IF (mA)
Topr (°C)
IF
(mA
)
VR (V)
length λp
644
636
636
623
623
612
612
590
590
583
574
574
568
562
562
∆λ
wavelength
630
626
626
613
613
605
605
587
587
580
571
571
565
558
558
λ
d
TLRE Series
TLRMH Series
TLRME Series
TLSH Series
TLSE Series
TLOH Series
TLOE Series
TLYH Series
TLYE Series
TLPYE Series
TLGE Series
TLGU Series
TLFGE Series
TLPGE Series
TLPGU Series
50
50
50
50
50
50
50
50
50
50
50
30
50
50
30
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
120
120
120
120
120
120
120
120
120
120
120
72
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
40~100
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
–40~120
1.9
1.9
1.9
2.0
1.9
2.0
2.0
2.0
2.0
2.0
2.0
2.1
2.0
2.1
2.1
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
20
13
23
13
20
13
20
13
17
14
17
17
15
14
14
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
120
120
72
* Some individual product specifications may differ from the series specifications given above. Please check the characteristics for each device.
13
Product List for Lead Type
3
2. High-Brightness Red LED Lamps
@Ta = 25°C
Typical Applicons
Viewing
Angle
2θ1/2
Package
Dimension
(mA)
FP
Number
Package
Size
(mm)
Intensity
I
(mcd) @I = 20 mA
F
Product Number
Typical Emitting Wavelength
Absolute Maximum Ratings
Parameter
ꢀ1
V
Series
Name
Lens Type
Guaranteed
Temperature
Min
Typ.
Open rank
Rank specified
λd (nm)
λp (nm)
DC Forward Current I (mA) Pulse Forward Current
I
F
1.2
1
ø10
4°
7°
4760
4760
2720
2720
1530
2720
1530
1530
1530
850
850
850
476
850
476
476
476
272
272
2720
850
272
85
19000
TLRH190P
TLSH20TP
TLRMH20TP
TLSH180P
TLRH180P
TLSH38TP
TLRMH38TP
TLRMH151P
TLSH17TP
TLRMH17TP
TLSH157P
TLRMH157P
TLRH157P
TLSH16TP
TLRMH16TP
TLRMH156P
TLSH156P
TLRH156P
TLRMH265P
TLSH160
TLRH190P(WX)
630
644
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
ꢀ1
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ2
ꢀ2
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ2
ꢀ1
ꢀ2
ꢀ1
ꢀ1
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
30
30
30
30
30
30
30
30
30
30
30
30
30
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
120
120
120
120
120
120
120
120
120
120
120
120
120
ø10-1
ø5-1
ø5-1
ø5-1
ø5-1
ø5-4
ø5-4
ø5-4
ø5-2
ø5-2
ø5-2
ø5-2
ø5-2
ø5-3
ø5-3
ø5-3
ø5-3
ø5-3
ø5-3
ø3-3
ø3-3
ø3-4
ø3-2
Elliptical-1
ø5-1
ø5-3
ø5-5
ø5-5
ø3-3
ø3-3
ø3-3
ø3-4
ø3-4
ø3-4
ø3-4
ø3-2
ø3-5
Traffic light
11000
9000
10000
5000
6500
4800
4200
4500
3200
2700
2240
1700
1900
1500
900
—
613
626
613
630
613
626
626
613
626
613
626
630
613
626
626
613
630
626
613
630
613
630
630
623
623
623
623
623
623
623
623
623
623
623
623
623
623
636
623
644
623
636
636
623
636
623
636
644
623
636
636
623
644
636
623
644
623
644
644
636
636
636
636
636
636
636
636
636
636
636
636
636
0.8
0.6
0.4
0.2
0
—
Derating of
Absolute Maximum
Forward Current
TLSH180P(VW)
8°
Pilot lamps
TLRH180P(UV)
(narrow range)
—
12°
15°
20°
—
0
20
40
60
80
100
Ambient Temperature Ta (°C)
—
—
–30°C~85°C
–40°C~120°C
Operating Temperature
Storage Temperature
—
ø5
TLSH157P(ST)
22°
25°
—
TLꢀH
Parameter
ꢀ2
TLRH157P(ST)
Series
Message board
Backlighting
—
1.2
1
—
—
0.8
0.6
0.4
0.2
0
1400
800
TLSH156P(RS)
Derating of
Absolute Maximum
Forward Current
30°
35°
10°
TLRH156P(QR)
Milky-white,
diffusing
650
—
4500
1800
800
—
TLRH160(ST)
—
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Red, transparent
Red, diffusing
0
20
40
60
80
100
TLRH160
Pilot lamps
Ambient Temperature Ta (°C)
ø3
Elliptical 5 X 5.8
ø5
40°
80°
TLSH125
220
TLRH262
TLRH262(NP)
TLRH247(PQ)
TLSU180P(TU)
TLSU156P(QR)
—
Message board (wide range)
Message board
Operating Temperature
Storage Temperature
–20°C~75°C
–30°C~100°C
30°/60°
6°
153
1530
272
153
47.6
476
476
153
153
85
450
TLRH247
4500
900
TLSU180P
TLSU156P
TLSU113P
TLSU114P
TLSU163
Pilot lamps (narrow range)
20°
Parameter
ꢀ3
Message board
Backlighting
30°
550
1.2
1
40°
250
TLSU114P(NP)
—
Pale red,
transparent
4000
1600
450
9°
0.8
0.6
0.4
0.2
0
TLSU160
—
Transparent
Derating of
Absolute
Maximum
Forward
Current
TLꢀU
Pale red,
diffusing
18°
35°
TLSU164
—
Series
300
TLSU125
TLSU125(PQ)
TLSU123(PQ)
—
Transparent
Pilot lamps
ø3
270
TLSU123
Red, transparent
Milky-white,
diffusing
85
180
TLSU126
0
20
40
60
80
100 120
40°
Ambient Temperature Ta (°C)
47.6
47.6
47.6
100
TLSU124
TLSU124(MN)
TLSU262(NP)
—
Red, diffusing
Transparent
Transparent
60°
80°
170
TLSU262
Backlighting (wide range)
Operating Temperature
Storage Temperature
–40°C~100°C
–40°C~120°C
130
TLSU268Gꢀ
ꢀ: Mount flush with PCB
14
15
Product List for Lead Type
3
2. High-Brightness Red LED Lamps
@Ta = 25°C
Typical Applicons
Viewing
Angle
2θ1/2
Package
Dimension
(mA)
FP
Number
Package
Size
(mm)
Intensity
I
(mcd) @I = 20 mA
F
Product Number
Typical Emitting Wavelength
Absolute Maximum Ratings
Parameter
ꢀ1
V
Series
Name
Lens Type
Guaranteed
Temperature
Min
Typ.
Open rank
Rank specified
λd (nm)
λp (nm)
DC Forward Current I (mA) Pulse Forward Current
I
F
1.2
1
2720
2720
2720
1530
850
850
850
476
85
9000
TLSE20TP
TLRME20TP
TLRE20TP
TLSE180P
TLRE180AP
TLSE17TP
TLRME17TP
TLRE17TP
TLRE138P
TLSE157P
TLRE157AP
TLSE16TP
TLSE16CP
TLRME16TP
TLRE16TP
TLRE16CP
TLRME17DP
TLSE156P
TLRE156AP
TLRE25TP
TLRE263AP
TLRE11TP
TLRE261AP
TLRE160A
TLSE50T
—
613
623
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Red, diffusing
Transparent
Transparent
Transparent
Red, transparent
Transparent
Transparent
Red, transparent
Red, diffusing
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Red, transparent
Red, transparent
Red, transparent
Red, transparent
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
ø5-1
ø5-1
7°
8°
8000
7000
8000
3000
3000
2400
1500
270
1900
1000
1500
1000
1200
800
600
500
900
450
150
80
—
626
630
613
630
613
626
630
630
613
630
613
613
626
630
630
626
613
630
613
630
613
630
630
613
626
630
613
626
630
626
613
626
630
630
630
630
613
626
630
630
636
644
623
644
623
636
644
644
623
644
623
623
636
644
644
636
623
644
644
644
644
644
644
623
636
644
623
636
644
636
623
636
644
644
644
644
623
636
644
644
Pilot lamps
0.8
0.6
0.4
0.2
0
—
ø5-1
(narrow range)
Derating of
Absolute Maximum
Forward Current
—
ø5-1
TLRE180AP(TU)
ø5-1
—
ø5-2
—
ø5-2
0
20
40
60
80
100
20°
22°
Ambient Temperature Ta (°C)
—
ø5-2
—
ø5-2
–30°C~85°C
–40°C~120°C
Operating Temperature
Storage Temperature
476
272
476
476
272
272
153
153
272
153
47.6
27.2
8.5
TLSE157P(ST)
ø5-2
TLRE157AP(RS)
ø5-2
ø5
—
ø5-3
Message board
Backlighting
Parameter
ꢀ2
—
ø5-3
—
ø5-3
1.2
1
25°
30°
—
ø5-3
—
ø5-3
0.8
0.6
0.4
0.2
0
—
ø5-2
Derating of
Absolute Maximum
Forward Current
TLSE156P(RS)
ø5-3
TLRE156AP(PQ)
ø5-3
75°
90°
—
ø5-6
TLꢀE
0
20
40
60
80
100
TLRE263AP(MN)
ø5-6
Ambient Temperature Ta (°C)
Series
Backlighting (wide range)
130°
150°
10°
20
—
ø5-7
8.5
15
—
ø5-7
Operating Temperature
Storage Temperature
–20°C~75°C
–30°C~100°C
476
1530
850
850
272
272
153
85
1200
3500
2200
1800
800
600
400
330
200
180
150
120
45
TLRE160A(RS)
ø3-3
—
ø3-3
16°
45°
TLRME50T
TLRE50T
—
ø3-3
Parameter
ꢀ3
—
ø3-3
Pilot lamps
1.2
1
TLSE53T
—
ø3-4
TLRME53T
TLRE53T
—
ø3-4
0.8
0.6
0.4
0.2
0
—
ø3-4
Derating of
Absolute
Maximum
Forward
Current
ø3
TLRME68TGꢀ
TLSE62T
—
ø3-5
85
—
ø3-2
80°
47.6
47.6
47.6
15.3
8.5
TLRME62T
TLRE262A
TLRE62T
—
ø3-2
TLRE262A(MN)
ø3-2
Backlighting (wide range)
0
20
40
60
80
100 120
Ambient Temperature Ta (°C)
—
—
—
—
—
—
—
ø3-2
120°
140°
TLRE60T
ø3-1
Operating Temperature
Storage Temperature
–40°C~100°C
–40°C~120°C
25
TLRE260A
TLSE27C
ø3-1
272
153
85
750
400
300
350
Elliptical-1
Elliptical-1
Elliptical-1
Elliptical-1
30°/50°
30°/60°
TLRME27C
TLRE27C
Elliptical 5 X 5.8
Message board
85
TLRE248
ꢀ: Mount flush with PCB
16
17
Product List for Lead Type
3
3. High-Brightness Orange LED Lamps
@Ta = 25°C
Typical Applicons
Viewing
Angle
2θ1/2
Package
Dimension
(mA)
FP
Number
Package
Size
(mm)
Intensity
I
(mcd) @I = 20 mA
F
Product Number
Typical Emitting Wavelength
Absolute Maximum Ratings
Parameter
ꢀ1
V
Series
Name
Lens Type
Guaranteed
Temperature
Min
Typ.
Open rank
Rank specified
λd (nm)
λp (nm)
DC Forward Current I (mA) Pulse Forward Current
I
F
1.2
1
ø10
4°
7°
8500
4760
2720
2720
1530
850
850
476
850
153
4760
1530
1530
476
850
476
272
272
153
47.6
27.2
15.3
476
1530
272
153
85
33000
TLOH190P
TLOH20TP
TLOH180P
TLOH38TP
TLOH17TP
TLOH157P
TLOH16TP
TLOH156P
TLOH160
TLOH190P(XY)
605
612
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ2
ꢀ2
ꢀ1
ꢀ2
ꢀ2
ꢀ1
ꢀ1
ꢀ1
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
30
30
30
30
30
30
30
30
30
30
30
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
120
120
120
120
120
120
120
120
120
120
120
ø10-1
ø5-1
Traffic light
15000
10000
7500
5000
2800
2300
1500
2300
450
—
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
605
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
612
0.8
0.6
0.4
0.2
0
8°
TLOH180P(VW)
ø5-1
Pilot lamps
Derating of
Absolute Maximum
Forward Current
(narrow range)
12°
20°
22°
25°
30°
10°
80°
7°
—
ø5-4
ø5
—
ø5-2
TLꢀH
TLOH157P(TU)
ø5-2
Series
Message board
Backlighting
—
ø5-3
0
20
40
60
80
100
Ambient Temperature Ta (°C)
TLOH156P(ST)
ø5-3
TLOH160(TU)
ø3-3
Pilot lamps
ø3
–30°C~85°C
–40°C~120°C
Operating Temperature
Storage Temperature
TLOH262
TLOH262(PQ)
ø3-2
Backlighting (wide range)
10000
7000
4500
2800
2000
1600
1000
900
TLOE20TP
TLOE180AP
TLOE17TP
TLOE157AP
TLOE16TP
TLOE16CP
TLOE156AP
TLOE266
—
ø5-1
Pilot lamps
8°
TLOE180AP(UV)
ø5-1
(narrow range)
Parameter
ꢀ2
20°
22°
—
ø5-2
TLOE157AP(ST)
ø5-2
1.2
1
—
ø5-3
25°
30°
Message board
Backlighting
Orange,
transparent
ø5
ø5-3
—
0.8
0.6
0.4
0.2
0
TLOE156AP(RS)
Transparent
ø5-3
Derating of
Absolute Maximum
Forward Current
Orange,
transparent
TLOE266(RS)
ø5-8
75°
90°
350
TLOE25TP
TLOE263AP
TLOE11TP
TLOE261AP
TLOE160A
TLOE50T
—
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
ø5-6
260
TLOE263AP(PQ)
ø5-6
Backlighting (wide range)
Pilot lamps
TLꢀE
0
20
40
60
80
100
130°
150°
10°
65
—
ø5-7
Ambient Temperature Ta (°C)
Series
50
TLOE261AP(LM)
ø5-7
1500
4500
1000
350
TLOE160A(ST)
ø3-3
Operating Temperature
Storage Temperature
–20°C~75°C
–30°C~100°C
16°
—
ø3-3
45°
TLOE53T
—
ø3-4
ø3
80°
TLOE62T
—
ø3-2
Parameter
ꢀ3
Backlighting (wide range)
Message board
80°
300
TLOE262A
TLOE60T
TLOE262A(PQ)
ø3-2
1.2
1
120°
140°
30°/50°
30°/60°
6°
27.2
15.3
272
153
2720
476
476
272
47.6
476
85
100
—
ø3-1
70
TLOE260A
TLOE27C
TLOE248
TLOE260A(LM)
ø3-1
Orange,
transparent
Orange,
transparent
0.8
0.6
0.4
0.2
0
800
—
Elliptical-1
Elliptical-1
ø5-1
Derating of
Absolute
Maximum
Forward
Current
Elliptical 5 X 5.8
370
—
7000
900
TLOU180P
TLOU156P
TLOU172P
TLOU113P
TLOU114P
TLOU160
TLOU180P(UV)
Transparent
Pilot lamps
TLOU156P(RS)
Transparent
ø5-3
(narrow range)
20°
Orange,
transparent
Orange,
transparent
Orange,
diffusing
ø5
800
—
ø5-3
0
20
40
60
80
100 120
Ambient Temperature Ta (°C)
Message board
Backlighting
30°
40°
9°
900
TLOU113P(RS)
ø5-5
250
TLOU114P(NP)
ø5-5
TLꢀU
Operating Temperature
Storage Temperature
–40°C~100°C
–40°C~120°C
2500
400
—
Transparent
ø3-3
Series
Orange,
transparent
Orange,
diffusing
Pilot lamps
35°
40°
TLOU123
—
ø3-4
ø3
47.6
47.6
47.6
85
180
TLOU124
—
ø3-4
300
TLOU262
TLOU262(PQ)
Transparent
ø3-2
Backlighting (wide range)
Message board
60°
Orange,
transparent
Orange,
transparent
200
TLOU267
—
—
ø3-2
Elliptical 5 X 5.8
30°/45°
450
TLOU248
Elliptical-1
ꢀ: Mount flush with PCB
18
19
Product List for Lead Type
3
4. High-BrightnessYellow LED Lamps
@Ta = 25°C
Typical Applicons
Viewing
Angle
2θ1/2
Package
Dimension
(mA)
FP
Number
Package
Size
(mm)
Intensity
I
(mcd) @I = 20 mA
F
Product Number
Typical Emitting Wavelength
Absolute Maximum Ratings
Parameter
ꢀ1
V
Series
Name
Lens Type
Guaranteed
Temperature
Min
Typ.
Open rank
Rank specified
λd (nm)
λp (nm)
DC Forward Current I (mA) Pulse Forward Current
I
F
1.2
1
ø10
4°
7°
8500
4760
2720
2720
2200
1530
850
850
476
850
85
30000
587
590
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ2
ꢀ2
ꢀ2
ꢀ2
ꢀ1
ꢀ1
ꢀ1
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
30
30
30
30
30
30
30
30
30
30
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
120
120
120
120
120
120
120
120
120
120
ø10-1
ø5-1
ø5-1
ø5-4
ø5-4
ø5-2
ø5-2
ø5-3
ø5-3
ø3-3
ø3-2
Elliptical-1
ø5-9
ø5-1
ø5-1
ø5-10
ø5-2
ø5-2
ø5-3
ø5-3
ø5-12
ø5-3
ø5-6
ø5-6
ø5-7
ø5-7
ø3-3
ø3-3
ø3-3
ø3-4
ø3-4
ø3-5
ø3-2
ø3-2
ø3-2
ø3-1
ø3-1
Elliptical-1
ø5-1
ø5-3
ø5-3
ø5-5
ø5-5
ø3-4
ø3-4
ø3-2
ø3-2
ø3-3
Traffic light
TLYH190P
TLYH20TP
TLYH180P
TLYH38TP
TLYH151P
TLYH17TP
TLYH157P
TLYH16TP
TLYH156P
TLYH160
TLYH190P(XY)
13000
8000
7000
4500
4800
2500
2200
1400
4300
280
587
587
587
587
587
587
587
587
587
587
587
580
587
587
580
587
587
587
587
580
587
587
587
587
587
587
587
580
587
580
587
587
587
580
587
587
587
587
587
587
587
587
587
587
587
587
587
590
590
590
590
590
590
590
590
590
590
590
583
590
590
583
590
590
590
590
583
590
590
590
590
590
590
590
583
590
583
590
590
590
583
590
590
590
590
590
590
590
590
590
590
590
590
590
—
0.8
0.6
0.4
0.2
0
8°
TLYH180P(VW)
Pilot lamps
Derating of
Absolute Maximum
Forward Current
12°
15°
20°
22°
25°
30°
10°
80°
60°/30°
5°
—
(narrow range)
—
ø5
TLꢀH
—
Series
TLYH157P(TU)
0
20
40
60
80
100
Message board
Backlighting
Ambient Temperature Ta (°C)
—
TLYH156P(RS)
–30°C~85°C
–40°C~120°C
Operating Temperature
Storage Temperature
Pilot lamps
Backlighting (wide range)
Message board
TLYH160(TU)
ø3
TLYH262
TLYH262(PQ)
Elliptical 5 X 5.8
153
2720
2720
1530
476
850
476
476
476
272
272
85
700
TLYH247
TLYH247(QR)
Parameter
ꢀ2
8000
9500
4700
2000
3000
2200
1500
1200
750
TLPYE23TP
TLYE20TP
TLYE180AP
TLPYE19TP
TLYE17TP
TLYE157AP
TLYE16TP
TLYE16CP
TLPYE18TP
TLYE156AP
TLYE25TP
TLYE263AP
TLYE11TP
TLYE261AP
TLYE160A
TLYE50T
—
7°
—
1.2
1
Pilot lamps
8°
TLYE180AP(UV)
(narrow range)
18°
20°
22°
—
0.8
0.6
0.4
0.2
0
—
Derating of
Absolute Maximum
Forward Current
TLYE157AP(ST)
—
Message board
Backlighting
ø5
25°
30°
Yellow,
transparent
—
0
20
40
60
80
100
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
—
Ambient Temperature Ta (°C)
700
TLYE156AP(QR)
75°
90°
300
—
Operating Temperature
Storage Temperature
–20°C~75°C
–30°C~100°C
47.6
15.3
8.5
170
TLYE263AP(NP)
Backlighting (wide range)
130°
150°
10°
45
—
TLꢀE
27
TLYE261AP(JK)
Parameter
ꢀ3
Series
476
1530
850
272
153
85
2300
3500
2500
800
TLYE160A(ST)
1.2
1
—
16°
45°
Pilot lamps
TLPYE50T
TLYE53T
—
0.8
0.6
0.4
0.2
0
Derating of
Absolute
Maximum
Forward
Current
—
450
TLPYE53T
TLYE68TGꢀ
TLYE62T
—
ø3
340
—
85
250
—
TLYE262A(NP)
—
80°
85
240
TLYE262A
TLPYE62T
TLYE60T
0
20
40
60
80
100 120
Backlighting (wide range)
Message board
Ambient Temperature Ta (°C)
47.6
27.2
15.3
272
850
153
153
153
47.6
85
150
120°
140°
30°/50°
6°
85
—
Operating Temperature
Storage Temperature
–40°C~100°C
–40°C~120°C
40
TLYE260A
TLYE27C
TLYE260A(KL)
—
Yellow,
transparent
Elliptical 5 X 5.8
650
4300
500
Transparent
TLYU180P
TLYU156P
TLYU172P
TLYU113P
TLYU114P
TLYU123
TLYU180P(TU)
TLYU156P(QR)
—
Pilot lamps
Transparent
(narrow range)
20°
Yellow,
transparent
Yellow,
transparent
ø5
400
30°
40°
35°
40°
500
Message board
Backlighting
—
TLꢀU
130
Yellow, diffusing
TLYU114P(MN)
TLYU123(NP)
TLYU124(MN)
TLYU262(MN)
—
Yellow,
transparent
Series
220
Pilot lamps
47.6
47.6
47.6
476
110
Yellow, diffusing
TLYU124
ø3
150
Transparent
TLYU262
60°
90°
Yellow,
transparent
90
Backlighting (wide range)
TLYU267
1500
Transparent
TLYU160
TLYU160(ST)
ꢀ: Mount flush with PCB
20
21
Product List for Lead Type
3
5. High-Brightness Green LED Lamps
@Ta = 25°C
Typical Applicons
Viewing
Angle
2θ1/2
Package
Dimension
(mA)
FP
Number
Package
Size
(mm)
Intensity
I
(mcd) @I = 20 mA
F
Product Number
Typical Emitting Wavelength
Absolute Maximum Ratings
Parameter
ꢀ1
V
Series
Name
Lens Type
Guaranteed
Temperature
Min
Typ.
Open rank
Rank specified
λd (nm)
λp (nm)
DC Forward Current I (mA) Pulse Forward Current
I
F
1.2
1
2720
850
1530
1530
476
476
272
153
476
476
153
272
85
7000
TLGE23TP
TLPGE23TP
TLFGE23TP
TLGE183P
TLPGE183P
TLGE19TP
TLFGE19TP
TLPGE19TP
TLGE159P
TLGE174P
TLPGE159P
TLGE158P
TLPGE158P
TLFGE18TP
TLGE18TP
TLGE18CP
TLPGE18TP
TLGE25TP
TLGE11TP
TLPGE11TP
TLGE160
—
571
574
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ1
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ1
ꢀ3
ꢀ1
ꢀ1
ꢀ1
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
ø5-9
ø5-9
5°
7°
3000
5000
5000
2000
1300
800
500
1700
1400
430
800
150
300
700
500
200
90
—
558
565
571
558
571
565
558
571
571
558
571
558
565
571
571
558
571
571
558
571
558
571
565
558
571
571
558
571
565
558
571
558
571
571
565
558
571
571
571
571
571
558
562
568
574
562
574
568
562
574
574
562
574
562
568
574
574
562
574
574
562
574
562
574
568
562
574
574
562
574
568
562
574
562
574
574
568
562
574
574
574
574
574
562
0.8
0.6
0.4
0.2
0
—
ø5-9
Derating of
Absolute Maximum
Forward Current
—
ø5-9
TLPGE183P(ST)
ø5-9
Pilot lamps
—
ø5-10
ø5-10
ø5-10
ø5-10
ø5-11
ø5-10
ø5-12
ø5-12
ø5-12
ø5-12
ø5-12
ø5-12
ø5-6
(narrow range)
18°
—
0
20
40
60
80
100
Ambient Temperature Ta (°C)
—
TLGE159P(ST)
Green,
–30°C~85°C
–40°C~120°C
Operating Temperature
Storage Temperature
20°
28°
—
transparent
ø5
—
Transparent
Transparent
Transparent
Transparent
Transparent
TLGE158P(QR)
Parameter
ꢀ2
—
85
—
1.2
1
272
153
85
—
30°
Message board
Backlighting
Green,
—
transparent
0.8
0.6
0.4
0.2
0
—
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Derating of
Absolute Maximum
Forward Current
75°
27.2
8.5
—
20
—
ø5-7
130°
2.72
850
272
476
272
153
153
153
47.6
153
85
8
—
ø5-7
0
20
40
60
80
100
2400
450
1500
1000
600
500
450
150
400
200
130
220
45
TLGE160(TU)
ø3-3
Ambient Temperature Ta (°C)
9°
TLꢀE
TLPGE160
TLGE50T
—
ø3-3
Series
—
ø3-3
Operating Temperature
Storage Temperature
–20°C~75°C
–30°C~100°C
16°
TLFGE50T
TLPGE50T
TLGE125
—
ø3-3
—
ø3-3
TLGE125(QR)
ø3-4
Pilot lamps
Parameter
ꢀ3
Green,
35°
TLGE123
TLGE123(PQ)
ø3-4
transparent
1.2
1
TLPGE125
TLGE53T
—
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
Transparent
ø3-4
—
ø3-4
0.8
0.6
0.4
0.2
0
ø3
45°
65°
TLFGE53T
TLPGE53T
TLGE262
—
ø3-4
Derating of
Absolute
Maximum
Forward
Current
47.6
47.6
15.3
47.6
47.6
27.2
15.3
15.3
8.5
—
ø3-4
TLGE262(NP)
ø3-2
TLPGE262
TLGE68TGꢀ
TLGE62T
—
ø3-2
155
110
70
—
ø3-5
0
20
40
60
80
100 120
Ambient Temperature Ta (°C)
—
ø3-2
Backlighting (wide range)
80°
TLFGE62T
TLPGE62T
TLGE60T
—
ø3-2
Operating Temperature
Storage Temperature
–40°C~100°C
–40°C~120°C
45
—
ø3-2
50
—
TLGE260(KL)
—
ø3-1
120°
45
TLGE260
ø3-1
Green,
30°/50°
85
250
400
360
90
TLGE27C
Elliptical-1
Elliptical-1
Elliptical-1
Elliptical-1
transparent
153
153
27.2
TLGE247
TLGE247(PQ)
—
Transparent
Message board
Elliptical 5 X 5.8
Green,
60°/30°
TLGE248
transparent
TLPGE247
TLPGE247(LM)
Transparent
ꢀ: Mount flush with PCB
22
23
Product List for Lead Type
3
5. High-Brightness Green LED Lamps
@Ta = 25°C
Typical Applicons
Viewing
Angle
Package
Dimension
(mA)
FP
Number
Package
Size
Intensity
I
(mcd) @I = 20 mA
F
Product Number
Open rank Rank specified
TLGU23TP
Typical Emitting Wavelength
Absolute Maximum Ratings
Parameter
ꢀ1
V
Series
Name
Lens Type
Guaranteed
Temperature
Min
Typ.
λd (nm)
λp (nm)
DC Forward Current I (mA) Pulse Forward Current
I
(mm)
F
2θ1/2
1.2
1
(1530)
(476)
(85.0)
(27.2)
(47.6)
(47.6)
(27.2)
(27.2)
(15.3)
(476)
(153)
(47.6)
(27.2)
(47.6)
(27.2)
(27.2)
(15.3)
(27.2)
(8.5)
4000
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
571
574
Transparent
Transparent
Transparent
Transparent
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
ꢀ3
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
ø5-9
ø5-9
Pilot lamps
5°
(narrow range)
1600
200
90
TLPGU23TP
TLGU18TP
TLPGU18TP
TLGU18CP
TLGU13CP
TLPGU13CP
TLGU13DP
TLPGU13DP
TLGU50T
558
571
558
571
571
558
571
558
571
558
571
558
571
558
571
558
571
558
571
562
574
562
574
574
562
574
562
574
562
574
562
574
562
574
562
574
562
574
0.8
0.6
0.4
0.2
0
ø5-12
ø5-12
ø5-12
ø5-5
Derating of
Absolute Maximum
Forward Current
30°
Green,
transparent
Green,
transparent
Green,
transparent
180
120
80
ø5
Message board
Backlighting
45°
55°
10°
ø5-5
0
20
40
60
80
100
Green, diffusing
Green, diffusing
Transparent
Transparent
Transparent
Transparent
Ambient Temperature Ta (°C)
70
ø5-5
35
ø5-5
–30°C~85°C
–40°C~120°C
Operating Temperature
Storage Temperature
1200
450
170
80
ø3-3
TLꢀU
TLPGU50T
TLGU53T
ø3-3
Series
ø3-4
Pilot lamps
Parameter
ꢀ2
TLPGU53T
TLGU53C
ø3-4
40°
50°
Green,
transparent
Green,
transparent
150
70
ø3-4
1.2
1
ø3
TLPGU53C
TLGU53D
ø3-4
Green, diffusing
Green, diffusing
Transparent
Transparent
80
ø3-4
0.8
0.6
0.4
0.2
0
Pilot lamps
40
TLPGU53D
TLGU62T
ø3-4
Derating of
Absolute Maximum
Forward Current
(narrow range)
70
ø3-2
80°
25
TLPGU62T
TLGU27C
ø3-2
Green,
transparent
Message board
Elliptical 5 X 5.8
30°/50°
(47.6)
180
Elliptical-1
0
20
40
60
80
100
ꢀ: Mount flush with PCB
Ambient Temperature Ta (°C)
Operating Temperature
Storage Temperature
–20°C~75°C
–30°C~100°C
ꢀ3
Parameter
1.2
1
0.8
0.6
0.4
0.2
0
Derating of
Absolute
Maximum
Forward
Current
0
20
40
60
80
100 120
Ambient Temperature Ta (°C)
Operating Temperature
Storage Temperature
–40°C~100°C
–40°C~120°C
24
25
Product List for Lead Type
3
6. Package Dimensions
ø3-1
ø3-2
ø3-3
ø3-4
ø3.8±0.2
ø3.8±0.2
ø3.1±0.2
ø3.8±0.2
ø3.1±0.2
ø3.8±0.2
ø3.1±0.2
ø3±0.2
ø2.8±0.2
0.7 max
0.45
0.7 max
0.45
0.7 max
0.45
0.7 max
0.45
0.7 max
0.7 max
2
2
2
1
1
2
1
1
2.54
2.54
2.54
2.54
1. Anode
2. Cathode
1. Anode
2. Cathode
1. Anode
2. Cathode
1. Anode
2. Cathode
ø3-5
ø5-1
ø5-2
ø5-3
(1.5)
ø3.8±0.2
ø3.1±0.2
(1.5)
ø5±0.2
ø5±0.2
0.6 max
0.5
0.5
0.45
2
0.5
2
1
2
2
1
1
1
2.54
2.54
2.54
2.54
Cathode index
Cathode index
1. Anode
1. Anode
1. Anode
1. Anode
2. Cathode
2. Cathode
2. Cathode
2. Cathode
ø5-4
ø5-5
ø5-6
ø5-7
ø5.0±0.2
ø4.9±0.2
ø5.0±0.2
ø5±0.2
0.5
0.5
0.5
0.5
2
2
2
1
1
2
1
1
2.54
Cathode index
2.54
2.54
2.54
Cathode index
Cathode index
Cathode index
1. Anode
1. Anode
1. Anode
1. Anode
2. Cathode
2. Cathode
2. Cathode
2. Cathode
26
(Unit:mm)
ø5-8
ø5-9
ø5-10
ø5-11
R0.4
ø5.0±0.2
ø5.0±0.2
0.5
0.5
0.5
✽0.5
2
2
2
2
1
1
1
1
2.54
2.54
2.54
2.54
Cathode index
Cathode index
Cathode index
1. Anode
1. Anode
1. Anode
1. Anode
2. Cathode
2. Cathode
2. Cathode
2. Cathode
ø5-12
ø10-1
Elliptical-1
5.0±0.2
5.8±0.2
ø10
ø5.0±0.2
0.5
0.5
2
0.5
2
1
2
1
1
2.54
Cathode index
2.54
2.54
Cathode index
1. Anode
1. Anode
1. Anode
2. Cathode
2. Cathode
2. Cathode
27
Product List for SMD Type
4
1.TL✽1008A (T04),TL✽1008A (T5)
Features
✽✽Package dimensions: 1.6 (L) x 0.8 (W) x 0.6 (H) mm
✽✽Four-element (InGaA P)
✽✽High-brightness and low power consumption can be accomplished by a switch-
over from general-purpose lamps.
✽✽Taping with 4 mm (T04 specification) and 2 mm (T05 specification) pitch is
standard. Achieves mounting efficiency.
✽✽Product height of 0.6 mm is suitable for use as backlighting for thin equipment.
Package Dimensions
Recommended Soldering Pad Dimensions
(unit: mm)
(unit: mm)
1
2
Polarity
0.8
0.7
0.8
LED chip is located
(0.2)
1.6
1.1
(1.0)
Maximum Rating
(Ta = 25°C)
Characteristics
DC Forward Current
DC Reverse Voltage
Power Dissipation
Symbol
IF
Rating
Unit
mA
V
0.3
25
4
VR
1. Cathode
2. Anode
1
2
(Note 1)
PD
60~62.5
mW
°C
Operating Temperature
Storage Temperature
Topr
Tstg
–40~85
Cathode index
Tolerance: ±0.1
–40~100
°C
Note 1: please refer to each technical datasheet.
Electrical and Optical Characteristics
Typical Luminous Intensity
Typical Emission Wavelength
(nm)
Forward Voltage V
F
Reverse Current
Emitted-
Light
Color
IV
(mcd)
(V)
I
R
(µA)
= 4 V
Series
Name
Product Number
@IF
= 20 mA
@I
Typ.
1.9
F
= 20 mA
Max
@V
R
@I
F
= 20 mA
λp
λ
λd
Min
Typ.
Max
27.2
47.6
47.6
27.2
27.2
4.76
27.2
27.2
8.5
70
140
180
105
70
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.5
2.5
2.5
2.5
2.5
50
50
50
50
50
50
50
50
50
50
50
50
644
623
612
590
574
562
636
612
596
590
574
562
18
17
15
13
11
11
17
15
13
13
11
11
630
613
605
587
571
558
623
605
592
587
571
558
Red
Red
✽
✽
TLRE1008A(T04)/(T05)
TLSE1008A(T04)/(T05)
TLOE1008A(T04)/(T05)
TLYE1008A(T04)/(T05)
TLGE1008A(T04)/(T05)
TLPGE1008A(T04)/(T05)
TLSU1008A(T04)/(T05)
TLOU1008A(T04)/(T05)
TLAU1008A(T04)/(T05)
TLYU1008A(T04)/(T05)
TLGU1008A(T04)/(T05)
TLPGU1008A(T04)/(T05)
1.9
2.0
2.0
2.0
2.1
2.0
2.1
2.1
2.1
2.1
2.1
✽✽
Orange
Yellow
Green
Pure green
Red
✽✽
TL✽E Series
✽✽
✽✽
18
✽✽
60
✽✽
78
Orange
Amber
Yellow
Green
Pure green
✽✽
30
✽✽
TL✽U Series
8.5
30
✽✽
8.5
30
✽✽
1.53
6
✽✽
28
Characteristics Diagram
I
V —
I
F
I
V —
I
F
I
F — VF
300
100
100
50
50
30
3
1
3
1 TLRE
TLSE
2 TLOE
TLYE
TLGE
3 TLPGE
Ta = 25°C
Ta = 25°C
Ta = 25°C
2
2
4
1
30
50
30
10
5
1
4
10
5
3
6
10
5
5
3
5
3
4
1
2
3
TLSU
TLOU
TLAU
TLYU
TLGU
TLPGU
1
1
2
3
4
5
6
TLRE
TLSE
TLOE
TLYE
TLGE
TLPGE
3
6
4
5
6
TLSU
TLOU
TLAU
TLYU
TLGU
TLPGU
0.5
0.3
2
1
7
4
0.5
1
0.1
1
7
1
1.6
3
5
10
30 50 100
3
5
10
30
50 100
1.7
1.8
1.9
2.0
2.1
2.2
Forward Current IF (mA)
Forward Current IF (mA)
Forward Voltage VF (V)
I
V — TC
I
V —
T
C
Allowable forward pulse current
characteristics
3
1
3
1
Ta = 25°C
2
3
1
120
100
80
4
2
10 ms
P
W
= 10 µs
5 ms
1 ms
20 ms
Allowable Range
1
0.5
0.3
0.5
0.3
60
3
1
TLRE
1
2
TLSU
TLSE
TLOE
TLYE
TLGE
TLPGE
40
TLOU
TLAU
TLYU
TLGU
TLPGU
2
3
4
20
0
3
0.1
0.1
–20
0
20
40
60
80
100
–20
0
20
40
60
80
100
10–3
10–2
10–1
Duty Ratio D
1
Case Temperature TC (°C)
Case Temperature TC (°C)
R
Radiation pattern
I
F — Ta
Vertical direction
Horizontal direction
Ta = 25°C
1
2
1
TL
U
E
TL
TL
E
40
30
20
0
10°
10°
0
10°
10°
2
TL
U
20°
20°
20°
20°
30°
30°
30°
30°
40°
50°
60°
70°
80°
90°
40°
50°
60°
70°
80°
40°
50°
40°
50°
60°
70°
80°
90°
2
2
1
60°
70°
80°
90°
1
0
0.2 0.4 0.6 0.8
0
0.2 0.4 0.6 0.8 1.0
10
0
0
20
40
60
80
100
Ambient Temperature Ta (°C)
Tape Specifications
Packing
Tape Packing Type
Tape Type Suffix
Pitches
4 mm
Quantity/Reel
Package dimensions (mm)
4
Appearance
Embossed
Tape Packing
8
T04
4000/reel
8000/reel
4
4
Embossed
Tape Packing
8
T05
2 mm
2
29
Product List for SMD Type
4
2.TL✽1002A (T02)
Features
✽✽Package dimensions: 2.0 (L) x 1.25 (W) x 1.1 (H) mm
✽✽Four-element (InGaA P)
✽✽High-brightness and low power consumption can be accomplished by a
switchover from general-purpose lamps.
✽✽Product height of 1.1 mm is suitable for use as backlighting for thin equip-
ment.
Package Dimensions
Recommended Soldering Pad Dimensions
(unit: mm)
(unit: mm)
1
2
1.2
1.0
1.2
Polarity
Cathode index
LED chip is located
(0.25)
2.0
1.4
(1.28)
Maximum Rating
(Ta = 25°C)
Characteristics
Symbol
Rating
Unit
mA
V
0.4 ± 0.2
DC Forward Current
DC Reverse Voltage
Power Dissipation
IF
25
4
V
R
D
(Note 1)
P
60~62.5
mW
°C
1
2
1. Cathode
2. Anode
Operating Temperature
Storage Temperature
Topr
Tstg
–40~85
Tolerance: ±0.1
–40~100
°C
Note 1: please refer to each technical datasheet.
Electrical and Optical Characteristics
Typical Luminous Intensity
Typical Emission Wavelength
(nm)
Forward Voltage V
F
Reverse Current
Emitted-
Light
Color
IV
(mcd)
Series
Name
(V)
I
R
(µA)
= 4 V
Product Number
@IF
= 20 mA
@I
Typ.
1.9
F
= 20 mA
Max
@V
R
@I
F
= 20 mA
λp
λ
λd
Min
Typ.
Max
27.2
47.6
47.6
27.2
27.2
4.76
15.3
27.2
27.2
8.5
70
140
180
105
70
18
45
60
78
30
30
30
6
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.5
2.5
2.5
2.5
2.5
50
50
50
50
50
50
50
50
50
50
50
50
50
644
623
612
590
574
562
644
636
612
596
590
574
562
18
17
15
13
11
11
18
17
15
13
13
11
11
630
613
605
587
571
558
630
623
605
592
587
571
558
Red
Red
✽
✽
TLRE1002A(T02)
TLSE1002A(T02)
TLOE1002A(T02)
TLYE1002A(T02)
TLGE1002A(T02)
TLPGE1002A(T02)
TLRU1002A(T02)
TLSU1002A(T02)
TLOU1002A(T02)
TLAU1002A(T02)
TLYU1002A(T02)
TLGU1002A(T02)
TLPGU1002A(T02)
1.9
2.0
2.0
2.0
2.1
2.0
2.0
2.1
2.1
2.1
2.1
2.1
✽✽
Orange
Yellow
Green
Pure green
Red
✽✽
TL✽E
Series
✽✽
✽✽
✽✽
✽✽
Red
✽✽
Orange
Amber
Yellow
Green
Pure green
✽✽
TL✽U
Series
✽✽
8.5
✽✽
8.5
✽✽
1.53
✽✽
30
Characteristics Diagram
I
V —
I
F
I
V —
I
F
I
F — VF
300
100
100
50
50
30
1
3
3
1 TLRE
TLSE
2 TLOE
TLYE
Ta = 25°C
Ta = 25°C
Ta = 25°C
2
2
1
30
4
50
30
TLGE
10
5
4
TLPGE
3
10
1
5
3
10
6
5
5
3
5
3
4
1
2
3
TLSU
TLOU
TLAU
TLYU
TLGU
TLPGU
1
1
2
3
4
5
6
TLRE
TLSE
TLOE
TLYE
TLGE
TLPGE
3
6
4
5
6
TLSU
TLOU
TLAU
TLYU
TLGU
TLPGU
0.5
0.3
2
1
7
4
0.5
1
0.1
1
7
1
1.6
3
5
10
30 50 100
(mA)
3
5
10
30
50 100
1.7
1.8
1.9
2.0
2.1
2.2
Forward Current
I
F
Forward Current
IF
(mA)
Forward Voltage VF (V)
I
V — TC
I
V —
T
C
Allowable forward pulse current
characteristics
3
1
3
1
Ta = 25°C
2
120
100
80
3
1
4
2
10 ms
20 ms
Allowable Range
5 ms
P
W = 10 µs
1 ms
1
0.5
0.3
0.5
0.3
60
3
1
TLRE
1
2
TLSU
TLOU
TLAU
TLYU
TLGU
TLPGU
TLSE
TLOE
TLYE
TLGE
TLPGE
40
2
3
4
20
0
3
0.1
0.1
10–3
10–2
10–1
1
–20
0
20
40
60
80
100
–20
0
20
40
60
80
(°C)
100
Case Temperature
TC
(°C)
Case Temperature
TC
Duty Ratio D
R
I
F — Ta
Radiation pattern
Horizontal direction
0
Vertical direction
0
Ta = 25°C
TL E
2
TL U
1
2
TL E
TL U
1
40
30
20
10°
10°
10°
10°
20°
20°
20°
20°
30°
30°
30°
30°
40°
50°
60°
70°
80°
90°
40°
40°
50°
60°
70°
80°
90°
40°
50°
60°
70°
80°
90°
2
50°
60°
70°
80°
90°
2
1
1
0
0.2 0.4 0.6 0.8 1.0
0
0.2 0.4 0.6 0.8 1.0
10
0
0
20
40
60
80
100
Ambient Temperature Ta (°C)
Tape Specifications
Packing
Tape Packing Type
Tape Type Suffix
Pitches
Quantity/Reel
Package dimensions
(mm)
Appearance
4
Embossed
Tape Packing
8
T02
4 mm
3000/reel
4
31
Product List for SMD Type
4
3.TL✽E1005B (T03),TL✽U1005A (T03)
Features
✽✽Package dimensions: 3.2 (L) x 2.4 (W) x 2.4 (H) mm
✽✽Unique ø2 mm lens top structure substantially improves light extraction.
✽✽Designed for miniaturization and slimming while maintaining high luminance
✽✽Optical axis precision is substantially improved over lead-frame structure LEDs.
Designed to reduce nonuniformity in the display
Package Dimensions
Recommended Soldering Pad Dimensions
(unit: mm)
(unit: mm)
1
2
1.1
2.0
1.1
Polarity
ø2.0
Cathode index
3.2
(6°)
Maximum Rating
(Ta = 25°C)
Characteristics
DC Forward Current
DC Reverse Voltage
Power Dissipation
Symbol
IF
Rating
Unit
mA
V
2.4
(2.2)
25
4
VR
1
2
(Note 1)
PD
60~62.5
mW
°C
TL✽U
–25~80
0.5 ± 0.2
Tolerance: ±0.1
Operating Temperature
Topr
1. Cathode
2. Anode
TL✽E
TL✽U
TL✽E
–40~85
–30~85
–40~100
°C
Storage Temperature
Tstg
Note 1: please refer to each technical datasheet.
Electrical and Optical Characteristics
Typical Luminous Intensity
Typical Emission Wavelength
(nm)
Forward Voltage V
F
Reverse Current
Emitted-
Light
Color
IV
(mcd)
(V)
I
R
(µA)
= 4 V
Series
Name
Product Number
@IF
= 20 mA
@I
Typ.
1.9
F
= 20 mA
Max
@V
R
@I
F
= 20 mA
λp
λ
λd
Min
Typ.
Max
153
272
476
272
153
47.6
153
153
47.6
450
1000
1500
850
350
130
450
450
140
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.5
50
50
50
50
50
50
50
50
50
644
623
612
590
574
562
636
612
590
18
17
15
13
11
11
17
15
13
630
613
605
587
571
558
623
605
587
Red
Red
TLRE1005B(T03)
TLSE1005B(T03)
TLOE1005B(T03)
TLYE1005B(T03)
TLGE1005B(T03)
TLPGE1005B(T03)
TLSU1005A(T03)
TLOU1005A(T03)
TLYU1005A(T03)
1.9
2.0
2.0
2.0
2.1
2.0
2.0
2.1
Orange
Yellow
Green
Pure green
Red
TL✽E Series
TL✽U Series Orange
Yellow
Automatic Mounting: Recommended Conditions
Please ask the mounting equipment maker
for the ideal automatic mounting conditions.
Absorption Head Diameter
ø1.2 mm
32
Characteristics Diagram
I
V —
I
F
I
F —
V
F
IV — TC
3000
1000
50
30
3
1
TLRE
TLSE
TLOE
TLYE
TLGE
TLSU
TLOU
TLPGE
TLYU
Ta = 25°C
Ta = 25°C
500
300
10
TLRE
TLSE
TLSU
TLOE
TLYE
TLGE
TLPGE
TLOU
TLYU
TLRE
TLSE
TLOE
TLYE
TLGE
TLPGE
TLYU
TLSU
TLOU
0.5
0.3
100
5
3
50
30
10
1
1
1.6
0.1
3
5
10
30 50 100
1.7
1.8
1.9
2.0
(V)
2.1
2.2
–20
0
20
40
60
80
(°C)
100
Forward Current
IF (mA)
Forward Voltage
V
F
Case Temperature TC
Allowable forward pulse current
characteristics
I
F — Ta
Radiation pattern
40
Ta = 25°C
Ta = 25°C
120
100
80
TL E1005B
TL U1005A
10 ms
5 ms
P
W
= 10 µs
0
10°
10°
20°
20°
1 ms
30°
30°
20 ms
Allowable Range
30
20
10
0
40°
50°
60°
70°
80°
90°
40°
50°
60°
70°
80°
90°
60
40
20
0
0
0.2 0.4 0.6 0.8 1.0
10–3
10–2
10–1
Duty Ratio
1
0
20
40
60
80
100
DR
Ambient Temperature Ta (°C)
Tape Specifications
Packing
Package dimensions
Tape Packing Type
Tape Type Suffix
Pitches
Quantity/Reel
Appearance
(mm)
4
Embossed
Tape Packing
T03
4 mm
1000/reel
8
4
33
Product List for SMD Type
4
4.TL✽1100 (T09),TL✽E1100 (T11), S4F42✽ (T09)
Features
✽✽Package dimensions: 3.2 (L) x 2.8 (W) x 1.9 (H) mm
✽✽Four-element (InGaA P)
✽✽High-heat resistance extends the operating temperature range.
Topr = –40~100°C
Package Dimensions
Recommended Soldering Pad Dimensions
(unit: mm)
(unit: mm)
1
2
1.65
1.15
1.65
Polarity
LED chip is located
3.2
Cathode index
Maximum Rating
(Ta = 25°C)
Characteristics
DC Forward Current
DC Reverse Voltage
Power Dissipation
Symbol
Rating
Unit
mA
V
0.8
(Note 1)
I
F
30/50
(3.5)
(1.4)
V
R
D
4
(Note 1)
P
72~140
–40~100
–40~100
mW
°C
1
2
Operating Temperature
Storage Temperature
Topr
Tstg
1. Anode
2. Cathode
°C
Tolerance: ±0.2
Note 1: please refer to each technical datasheet.
Electrical and Optical Characteristics
Typical Luminous Intensity
Typical Emission Wavelength
(nm)
Forward Voltage V
F
Reverse Current
Emitted-
Light
Color
IV
(mcd)
Series
Name
(V)
I
R
(µA)
= 4 V
Product Number
@IF
= 20 mA
@I
Typ.
1.9
F
= 20 mA
Max
@V
R
@I
F
= 20 mA
λp
λ
λd
Min
Typ.
Max
47.6
85
130
240
260
190
100
180
180
150
100
25
2.5
2.5
2.5
2.5
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.5
2.8
2.8
2.8
2.8
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
644
623
612
590
644
623
612
590
574
562
636
612
590
574
562
574
562
18
15
15
13
18
15
15
13
11
11
17
15
13
11
11
11
11
630
613
605
587
630
613
605
587
571
558
623
605
587
571
558
571
558
Red
Red
TLRH1100(T09)
TLSH1100(T09)
TLOH1100(T09)
TLYH1100(T09)
TLRE1100(T11)
TLSE1100(T11)
TLOE1100(T11)
TLYE1100(T11)
TLGE1100(T11)
TLPGE1100(T11)
TLSU1100(T09)
TLOU1100(T09)
TLYU1100(T09)
TLGU1100(T09)
TLPGU1100(T09)
S4F42Q1(T09)
S4F42Z1(T09)
2.1
2.1
2.1
1.9
1.9
2.0
2.0
2.0
2.1
2.0
2.0
2.1
2.3
2.3
2.27
2.27
TL✽H Series
TL✽E Series
85
Orange
Yellow
Red
85
47.6
47.6
47.6
47.6
47.6
8.5
Red
Orange
Yellow
Green
Pure green
Red
27.2
47.6
15.3
15.3
4.76
47.6
8.5
80
100
50
Orange
Yellow
Green
Pure green
Green
Pure green
TL✽U Series
45
12
110
25
Others
34
Characteristics Diagram
I
V —
I
F
I
V —
I
F
I
V — IF
1000
500
300
300
100
Ta = 25°C
Ta = 25°C
Ta = 25°C
500
300
100
50
30
50
30
100
10
10
50
30
TLRE
TLSE
TLOE
TLYE
TLGE
TLPGE
S4F42Q1
S4F42Z1
TLSU
TLOU
TLYU
5
3
TLRH
TLSH
TLOH
TLYH
5
3
TLGU
TLPGU
10
1
1
1
1
3
5
10
30 50 100
3
5
10
30
50 100
1
3
5
10
30 50
(mA)
100
Forward Current
IF
(mA)
Forward Current
IF
(mA)
Forward Current
IF
Allowable forward pulse current
characteristics
IF — VF
I
V — TC
TL H/TL E/S4F series
Ta = 25°C
50
30
10
TLRH, TLSH, TLOH, TLYH
TLRE,TLOE, TLGE, TLPGE
TLYE, TLSU
S4F42Q1, S4F42Z1,TLOU
TLYU
TLGU, TLPGU
Ta = 25°C
200
160
120
80
PW = 10 µs
5
3
1 ms
10 ms
20 ms
5 ms
10
1
Allowable Range
TLRH
TLSH
TLOH,TLYH
TLRE
TLSE
S4F42Q1,
S4F42Z1
TLSU
TLOU
TLYU
5
3
0.5
0.3
40
TLOE,TLYE,
TLGE
TLGU
TLPGU
TLPGE
1
1.6
0.1
–25
0
10–3
10–2
10–1
1
1.8
2.0
2.2
2.4
2.6
0
25
50
75
(°C)
100
Case Temperature
TC
Duty Ratio DR
Forward Voltage VF (V)
Allowable forward pulse current
characteristics
Radiation pattern
I
F — Ta
TL U series
Ta = 25°C
Ta = 25°C
80
60
40
120
100
80
60
40
20
0
TL E and others
TL U
PW = 10 µs
0
10°
10°
1 ms
5 ms
20°
20°
10 ms
20 ms
30°
30°
40°
50°
60°
70°
80°
90°
40°
50°
60°
70°
80°
90°
Allowable Range
20
0
0
0.2 0.4 0.6 0.8 1.0
10–3
10–2
10–1
Duty Ratio D
1
0
20
40
60
80
100
120
Ambient Temperature Ta (°C)
R
Tape Specifications
Packing
Tape Packing Type
Tape Type Suffix
Pitches
8 mm
Quantity/Reel
1000/reel
Package dimensions
(mm)
Appearance
4
Embossed
Tape Packing
12
T09
8
4
Embossed
Tape Packing
8
T11
4 mm
2000/reel
4
35
Product List for SMD Type
4
5.TL✽1102 (T10), S4F43✽ (T10)
Features
✽✽Package dimensions: 3.2 (L) x 2.8 (W) x 3.4 (H) mm
✽✽4-element (InGaA P), H Series / U Series
✽✽High-heat resistance extends the operating temperature range.
Topr = –40~100°C
Package Dimensions
Recommended Soldering Pad Dimensions
1
2
(unit: mm)
(unit: mm)
Polarity
1.65
1.15
1.65
3.5
3.2
LED chip is located
ø2.8
Cathode index
Maximum Rating
(Ta = 25°C)
Characteristics
DC Forward Current
DC Reverse Voltage
Power Dissipation
Symbol
Rating
Unit
mA
V
(Note 1)
IF
30/50
0.8
V
R
D
4
(Note 1)
P
72~140
–40~100
–40~100
mW
°C
1
2
Operating Temperature
Storage Temperature
Topr
Tstg
1. Anode
2. Cathode
°C
Tolerance: ±0.2
Note1: please refer to each technical datasheet.
Electrical and Optical Characteristics
Typical Luminous Intensity
Typical Emission Wavelength
(nm)
Forward Voltage V
F
Reverse Current
Emitted-
Light
Color
IV
(mcd)
(V)
I
R
(µA)
= 4 V
Series
Name
Product Number
@IF
= 20 mA
@I
Typ.
1.9
F
= 20 mA
Max
@V
R
@I
F
= 20 mA
λp
λ
λd
Min
Typ.
Max
85
153
272
153
85
320
600
650
480
320
600
650
480
300
75
2.5
2.5
2.5
2.5
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.5
2.8
2.8
2.8
2.8
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
644
623
612
590
644
623
612
590
574
562
636
612
590
574
562
574
562
18
15
15
13
18
17
15
13
11
11
17
15
13
11
11
11
11
630
613
605
587
630
613
605
587
571
558
623
605
587
571
558
571
558
Red
Red
✽TLRH1102(T10)
✽TLSH1102(T10)
✽TLOH1102(T10)
✽TLYH1102(T10)
✽TLRE1102(T10)
✽TLSE1102(T10)
✽TLOE1102(T10)
✽TLYE1102(T10)
✽TLGE1102(T10)
✽TLPGE1102(T10)
✽TLSU1102(T10)
✽TLOU1102(T10)
✽TLYU1102(T10)
✽TLGU1102(T10)
✽TLPGU1102(T10)
✽S4F43Q1(T10)
✽S4F43Z1(T10)
2.1
2.1
2.1
1.9
1.9
2.0
2.0
2.0
2.1
2.0
2.0
2.1
2.3
2.3
2.27
2.27
TL✽H Series
TL✽E Series
Orange
Yellow
Red
272
272
153
85
Red
Orange
Yellow
Green
27.2
85
Pure green
Red
200
250
130
120
30
85
Orange
Yellow
Green
47.6
47.6
8.5
TL✽U Series
Pure green
Green
85
250
60
Others
27.2
Pure green
36
Characteristics Diagram
I
V —
I
F
I
V —
I
F
I
V — IF
3000
1000
3000
1000
500
300
Ta = 25°C
Ta = 25°C
Ta = 25°C
100
500
300
500
300
50
30
100
100
S4F42Q1
S4F43Z1
TLSU
TLOU
TLYU
50
30
10
TLRE
TLSE
TLOE
TLYE
TLGE
TLPGE
50
30
TLRH
TLSH
TLOH
TLYH
5
3
10
5
TLGU
TLPGU
10
1
1
1
3
5
10
30 50 100
1
3
5
10
30
50 100
3
5
10
30 50
(mA)
100
Forward Current
I
F
(mA)
Forward Current
IF
(mA)
Forward Current
IF
Allowable forward pulse current
characteristics
IF — VF
I
V —TC
TL H/TL E/S4F series
Ta = 25°C
50
30
10
TLRH, TLSH, TLOH, TLYH
TLRE,TLOE, TLGE, TLPGE
TLYE, TLSU
S4F42Q1, S4F42Z1,TLOU
TLYU
Ta = 25°C
200
160
120
80
PW = 10 µs
5
3
1 ms
5 ms
10 ms
20 ms
TLGU, TLPGU
10
Allowable Range
1
TLRH
TLSH
TLOH,TLYH
TLRE, TLSE TLOU
TLOE,TLYE, TLYU
S4F43Q1,
S4F43Z1
TLSU
5
3
0.5
0.3
40
TLGE
TLGU
TLPGE
TLPGU
1
0.1
–25
0
10–3
10–1
0
25
50
75
(°C)
100
10–2
Duty Ratio D
1.6
1.8
2.0
2.2
2.4
2.6
1
Forward Voltage VF (V)
Case Temperature
TC
R
Allowable forward pulse current
characteristics
Radiation pattern
I
F — Ta
TL U series
Ta = 25°C
Ta = 25°C
80
60
40
120
100
80
60
40
20
0
TL E and others
TL U
PW = 10 µs
0
10°
10°
1 ms
5 ms
20°
20°
10 ms
20 ms
30°
30°
40°
50°
60°
70°
80°
90°
40°
50°
60°
70°
80°
90°
Allowable Range
20
0
0
0.2 0.4 0.6 0.8 1.0
10–3
10–2
10–1
Duty Ratio D
0
20
40
60
80
100
120
1
Ambient Temperature Ta (°C)
R
Tape Specifications
Packing
Tape Packing Type
Tape Type Suffix
Pitches
Quantity/Reel
Package dimensions
(mm)
Appearance
4
Embossed
Tape Packing
12
T10
8 mm
500/reel
8
37
Packing Specifications
5
1. Lead Type
1-1 Tape packing
These tape specifications apply to 2-lead LED lamps with diameters of 3.1 mm and 5 mm.
These LED lamps have 2.54 mm and 5 mm lead pitches respectively, and can be mounted on a circuit board using
an auto-insertion machine. Packing can either be in an ammo pack or a reel pack as desired.
Product number format
Example:
TLRE180AP (TPK51)
Tape specification
Product number
Tape specifications
Tapes are classified by lead polarity, packing style and distance from the device base to the tape feedhole
centerline, as shown below.
Tape Specifications
Tape Forms
Reel pack
Ammo pack
Anode lead-out
TPK1
Cathode lead-out
TPKR1
A
○
TPK51
TPK53
TPK55
TPJ51
TPJ52
TPJ53
TPJ56
B
○
TPK3
TPKR3
C
○
TPK5
TPKR5
D
○
TPJ1
TPJR1
E
○
TPJ2
TPJR2
F
○
TPJ3
TPJR3
G
○
TPJ6
TPJR6
Unit: mm
Tape dimensions
A
○
B
○
C
○
D
○
E
○
F
○
G
○
23.35
±
1.0 18.55
±
1.0 17.0
±
1.0 23.35
±
1.0 20.5
±
1.0 22.5 ± 1.0 23.35 ± 1.0
H
H0
W
—
16.0 ± 0.5
P1
+ 1
– 0.5
18.0
A B C
D
E F G
6.0 ± 0.3 or 13.0 ± 0.3
W0
W1
W2
P0
P1
P2
F
+ 0.75
9.0
– 0.5
≤
0.5
H
W2
12.7
H0
W0
L
W1
12.7 ± 1 (product pitch)
6.35 ± 1.3
W
F
F
F
P2
D0
P0
+ 0.8
– 0.2
+ 0.8
– 0.2
2.54
5.00
L
11.0 max
D0
ø4.0 ± 0.2
38
Reel pack
ꢀꢀReel dimensions and winding
ø1
ø2
ø1 = 360 mm
t = 50 mm
ø2 = 30 mm
Direction of tape feed
ꢀꢀContents
LED type
ø3 Series
ø5 Series
Quantity per Reel
2,000
1,000
Ammo pack
(1) Taped devices are packed by alternately folding the tape every 25 devices.
(2) Four or more devices are removed from the beginning and end of the tape.
ø3.1 series
=
d1 140
or 270 mm
d2 336 mm
d3 52 mm
d1
=
=
Four or more devices
are removed
ø5 series
=
d1 248 mm
d2
=
d2 339 mm
=
d3 55 mm
25 devices
per row
d3
ꢀꢀContents
Four or more devices are removed
LED type
ø3 Series
ø5 Series
Quantity per Reel
2,000 or 4,000
1,000 or 2,000
39
Packing Specifications
5
1-2 Packing (Devices are loose in bags.)
Packing for ø5-mm type
Minimum number of LED lamps: 500 per plastic bag
● Large box (standard)
● Small box
Quality guarantee tape
Quality guarantee tape
120 mm
(external)
Packing box
Packing box
85 mm
(external)
260 mm
(external)
180 mm
(external)
180 mm
(external)
80 mm
(external)
10 bags with 5,000 LED lamps
2 bags with 1,000 LED lamps
Packing for ø3-mm type
Minimum number of LED lamps: 500 per plastic bag
● Large box (standard)
● Small box
Quality guarantee tape
Quality guarantee tape
120 mm
(external)
Packing box
Packing box
85 mm
(external)
260 mm
(external)
180 mm
(external)
180 mm
(external)
80 mm
(external)
20 bags with 10,000 LED lamps
4 bags with 2,000 LED lamps
40
2. SMD Type
Tape dimensions
(Unit: mm)
T02
4.0 ± 0.1
2.0 ± 0.05
+
0.1
1.30 ± 0.05
0.25 ± 0.05
1.5
–0
A
A'
A - A'
Polarity
1.45 ± 0.1
4.0 ± 0.1
1.1 ± 0.1
T03
4.0 ± 0.1
2.0 ± 0.05
+0.1
1.5
2.7 ± 0.1
0.25 ± 0.05
–0
A
A'
A - A'
Polarity
2.8 ± 0.1
4.0 ± 0.1
1.1 ± 0.1
T04
4.0 ± 0.1
2.0 ± 0.05
+0.1
–0
0.75 ± 0.1
0.20 ± 0.05
1.5
A
A'
A - A'
Polarity
4.0 ± 0.1
0.9 ± 0.1
0.6 ± 0.05
T05
4.0 ± 0.1
2.0 ± 0.05
+0.1
–0
0.75 ± 0.1
1.5
0.20 ± 0.05
A
A'
A - A'
Polarity
2.0 ± 0.1
0.6 ± 0.05
0.9 ± 0.1
41
Packing Specifications
5
T09,T10
T09
T10
Dimensions
of part A
T10
2.3 ± 0.1 3.6 ± 0.1
4.0 ± 0.1
+0.1
–0
A
1.5
0.3 ± 0.05
2.0 ± 0.05
A - A'
Polarity
+0.1
1.5
8.0 ± 0.1
4.0 ± 0.1
2.9 ± 0.1
–0
T11
+0.1
–0
2.3 ± 0.1
0.3 ± 0.05
1.5
2.0 ± 0.05
A - A'
Polarity
4.0 ± 0.1
(1.5 ± 0.1)
2.9 ± 0.1
(Unit: mm)
Reel dimensions
T02,T03,T04,T05,T11
11.4 ± 1
9 ± 0.3
+0
–4
ø180
ø13 ± 0.5
ø21 ± 0.8
Corresponds to
EIAJ RRM08B
T09,T10
13 ± 0.3
15.4 ± 1.0
2 ± 0.5
Corresponds to
EIAJ RRM12B
42
Handling Precautions
6
1. Lead Type
1-1 Mounting on a Printed Circuit Board (PCB)
Soldering coditions
Type of soldering
Conditions
Precautions
Solder temperature: 260°C max
Dipping time: 3 seconds max
Soldering portion of lead: at least 2 mm
away from the body of the device
● When the temperature of the device itself is rising, please be careful
not to apply mechanical stress to it.
● During solder dip, do not apply mechanical stress between leads of a
device; measures should taken especially in order to prevent tempera-
ture rise in a device.
Solder dip
Iron tip temperature: 300°C max
Soldering iron capacity: 30 W max
Soldering time: 3 seconds max
Soldering portion of lead: at least 2 mm
away from the body of the device
Manual
soldering (using
soldering iron)
● It is recommended to radiate heat by gripping leads with pliers or a
tweezer when the working condition permits doing so.
●Soldering precaution forTLRME68TG Series
These newly designed LED lamps are less prone to the effects of stress during automatic mounting than conventional
LED lamps. Hence, this type of LED lamp can be mounted close to a through-hole on the PCB. However, if one of these
lamps is subjected to excessive stress, the resin part may break or the lamp may be damaged in such a way that it will not
emit light. Before using this type of LED lamp, please carefully read the technical datasheets for the product in question.
1-2 Mounting Precautions
Lead forming
The lead should be formed at least 5 mm away from the body of the device.
Care must be taken to ensure that no stress is applied to the resin.
Pliers
Mechanical stress on leads
If stress is applied to leads during soldering, or if excessive stress such as tension, twisting or compression is applied
between leads while the temperature is still high immediately after soldering the device may be open circuited and will
afterwards be unable to perform according to its specifications. Instead, positions and directions of leads must be cor-
rected after cooling.
Cleaning
1) Ultrasonic cleaning
The resin material of the device package may be harmed if ultrasonic cleaning is conducted after soldering and a
solvent is used remove flux, or if non-recommended chemicals are used for brusing.
Note: The amount of stress applied to a device during ultrasonic cleaning will vary according to the size of the cleaning tank, the output power of
the oscillator, the size of the PCB, and the mounting method. Please confirm test results under actual conditions before starting cleanig in
production line.
Ultrasonic cleaning should normally be conducted with an ultrasonic output of 300 W or lower and should be completed within 30 seconds.
These requirements may vary according to the size of the cleaning tank and the PCB.
2) Solvent
Depending on the solvent used, the sealed resin of a device package may be harmed. It is therefore necessary to
confirm in advance that the solvent used for cleaning will not harm the resin. (Also, the use of solvents containing
freon is restricted so as to prevent destruction of the ozone layer.) Before using any chemical, check whether the
solvent will harm the device package resin.
1-3 Reliability
InGaA P series LEDs are known for their high reliability compared to other LED devices and exhibit excellent charac-
teristics particularly in high-temperature, high-humidity environments. However, before using these devices in equip-
ment, be sure to perform adequate testing; in addition, include safety margins in design specifications.
1-4 U-Series Lead Sheathing
The new InGaA P-type U-Series uses tin (Sn) plating instead of solder dip as the sheathing for leads.
Lead-free (Pb-free) sheathing helps to preserve the environment. When using this series, please note the following:
1) The solderability of tin plate is equivalent to that of solder dip. However, avoid storing U-Series devices for long
periods and try to use them as soon as possible.
2) Since there is exposed iron (Fe) on the cut section of the lead tie-bar, leads may get rusty. Treat (protect) the surface
of leads where necessary, particularly when devices are to be used in salty environments.
For detailed recommended storage conditions, see the usage cautions in the databook.
Toshiba plan to introduce lead-free (Pb-free) sheathing of leads gradually for conventional LEDs as well.
1-5 Four-element LEDs
This type of visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that
it will not be affected by this IR light.
44
2. SMD Type
2-1 Recommended Soldering Conditions
Temperature profile (reflow)
10 s max
240°C max
140°C~160°C
4°C / s max
4°C / s max
60~120 s
Time (s)
Soldering pad dimensions
Based on the specifications of the individual product.
Please refer to each datasheets. (Page 28, 30, 32, 34 and 36)
●●TL●1002A Series,TL●1005B Series,TL●1008A Series
• Please perform the first reflow soldering with reference to the above temperature profile within 168 h after package is
opened.
• If a second reflow soldering, it should be performed within 168 h of the first reflow under the above temperature profile
conditions.
• Storage conditions before second reflow soldering: 30°C, 60% RH or lower
• Do not perform flow soldering.
●●TL●1100 Series
• Please perform the first reflow soldering with reference to the above temperature profile within 168 h after package is
opened.
• If a second reflow soldering, it should be performed within 168 h of the first reflow under the above temperature profile
conditions.
• Storage conditions before second reflow soldering: 30°C, 60% RH or lower
• Please ask your nearest Toshiba distributor for more details before performing flow soldering.
● TL●1102 Series
• Please perform the first reflow soldering with reference to the above temperature profile within 168 h after package is
opened.
• Please ask your nearest Toshiba distributor for more details before performing repeat reflow soldering.
• Do not perform flow soldering.
Manual soldering
Manual soldering should be performed within 3 s at a maximum temperature of 300°C using a 25 W soldering iron.
Manual soldering should be performed only once at each soldering spot.
2-2 Mounting Precautions
• Do not apply stress to the resin part at high temperature.
• The resin can easily be scratched. Avoid friction between the resin and any hard materials.
• When installing the PCB in a product, ensure that the device does
Mounting example
not come into contact with other components.
• The product should be mounted widthwise on the PCB is across the
width of the board.
• Design the PCB layout so as to minimize force which will be exerted
on the device if the PCB warps.
• When the device is mounted on a flexible PCB, before using the
product, ensure that there is no problem with LED reliability.
PCB
45
Handling Precautions
6
When cleaning is required after soldering
Chemical
AK225, alcohol
Temperature and time
Ultrasonic cleaning
50°C x 30 s and 30°C x 30 mins
300 W or less
2-3 Moisture-Proof Packaging
To avoid moisture absorption by the resin, the devices are packed in an
aluminum envelope with silica gel.
Because the optical characteristics of the device can be affected during
soldering due to gas expansion resulting from previous moisture
absorption, store under the following conditions after opening.
Caution:
1. The moisture proof bag may be stored unopened within
6 months at the following conditions.
After baking, use the baked devices within 72 hours, but
perform baking only once.
Temperature: 5°C~30°C
Humidity: 90% (max)
Baking conditions: 60°C ± 5°C, for 12 to 24 hours.
Expiration date: 6 months from sealing date, which is
imprinted on the same side as this label affixed.
4. Repeated baking can cause the peeling strength of the
taping to change, than leads to trouble in mounting.
Furthermore, prevent the devices from being destructed
against static electricity for baking of it.
5. If the packing material of laminate would be broken, the
hermeticity would deteriorate. Therefore, do not throw or
drop the packed devices.
2. After opening the moisture proof bag, the devices should
be assembled within 168 hours in an environment of 5°C
to 30°C/60% RH or below.
3. If upon opening, the moisture indicator card shows
humidity 30% or above (Color of indication changes to
pink) or the expiration date has passed, the devices
should be baked in taping with reel.
2-4 Design Precautions (for the LEDs general characteristics)
Adhere strictly to maximum ratings
The maximum ratings are a set of specified values which must not be exceeded, even for an instant.
For the ratings of a specific device, please refer to the individual specifications for the device in question.
Adhere strictly to the temperature range in which operations are guaranteed.
The recommended operating conditions for each device are those necessary to guarantee that the device will
operate as specified in the datasheets. To ensure high reliability when using the device, derate the maximum
ratings for current, power and temperature as recommended in the individual specifications for the device in
question.
Temperature and humidity environment
Compared to mechanical components, semiconductor devices are generally highly sensitive to temperature.
Since a the device’s electrical characteristics are subject to the usage temperature, first investigate the
product’s temperature characteristics, and, if necessary, incorporate derating into the design.
If the device is used outside the guaranteed operating temperature range, its electrical characteristics cannot
be guaranteed and performance deterioration may result.
Viewing angle characteristic
Each product has its own distinct viewing angle characteristic.
Select the product whose viewing angle characteristic best meets the
requirements for the device in which it will be used.
The viewing angle is based on the angle q between the axis on which
the luminous intensity of light from the optical source is 100% and any
axis on which the luminous intensity is 50%.
0.5
1
The angle between these two axes is referred to as the LED’s half-
angle value.
For the viewing angle characteristic of a particular product, please
refer to the datasheets for the product in question.
46
Thermal design precautions
The failure rate of semiconductor devices is greatly accelerated by high operating temperatures.
• Ensure that the ambient temperature (Ta) of the device is not affected by exothermic heat in the device's
vicinity, and that the ambient temperature is kept as low as possible.
•
If the device's operating power dissipation is comparatively large, consider forced-air cooling, the selection of
different PCB materials, or the use of heat-dispersion sink, for example. These measures can lower the
thermal resistance of the package.
Example: Temperature dependence of optical output
IV-TC
10
Temperature dependence
●●●●
5
3
•
Luminance
Because the light recoupling rate of the LED is
temperature dependent, as the temperature rises, the
intensity of the light emission falls. To avoid a temperature
rise in the connection resulting from power dissipation,
Toshiba recommends a pulse driving design and a case
with good heat dispersion characteristics. Before using the
device, check that there are no problems with set use.
1
0.5
0.3
0.1
–30
–10
10
30
50
70
Color tone (Light emission wavelength)
•
Case Temperature Tc (°C)
In LEDs, a temperature rise in the junction resulting from
power dissipation causes the light emission wavelength to shift to the longer side. Toshiba therefore
recommends a thermal design that avoids temperature rise in the junction due to power dissipation.
Reference value:
∆λ = 0.2 nm x∆Tj ∆Tj: Emitted-light device junction temperature
Light output deterioration
The lifespan of the emitted-light device is greatly affected not only by the device's own particular lifespan
characteristics, but by the operating conditions and the operating environment as well. Accordingly, when
selecting the emitted-light device and setting the operating conditions, we recommend checking first the several
characteristics affecting lifespan.
For reliability data on individual products, including lifespan data, inquire at a Toshiba sales office or agency.
TLOE1002 Operation life test
Test Condition: IF = 25 mA, Duty = 100%, Ta = 25°C, N = 30
150
100
50
INT.
100
1000
10000
100000
Test Time (h)
●●Visible LED lamps made of
will also emit some IR light. If a photodetector is located near an LED lamp,
InGaA P
please ensure that it will not be affected by this IR light.
47
Product Manufactured Overseas
7
Place of Manufacture: Toshiba Semiconductor Thailand Co., Ltd.
Manufactured products: High-brightness lead-type LED lamps
●Abbreviation: TST
The suffix ‘T’ in brackets at the end of a product number indicates that the product was manufactured by
Toshiba Semiconductor Thailand Co., Ltd. The luminosity rank for the product, if there is one, is also specified
within the brackets, before the suffix ‘T’.
• Example: TLRH157P (TU, T)
The product number above indicates that the product was manufactured in Thailand and that it is available with
luminosity ranks of T and U.
If your products are assembled outside Japan, high-brightness lead-type LED lamps can be supplied by
Toshiba Semiconductor Thailand Co., Ltd. upon request.
For information about Thai-manufactured products, please contact your nearest Toshiba distributor.
With Lead Stopper Type
S4E38XX(T)
TLGE11T(T)
TLGE158(T)
TLGE159(T)
TLGE174(T)
TLGE183(T)
TLGE18C(T)
TLGE18T(T)
TLGE19T(T)
TLGE23T(T)
TLGE25T(T)..
TLGE260(T)
TLGE262(T)
TLGE27C(T)
TLGE50T(T)
TLGE53C(T)
TLGE53T(T)
TLGE60T(T)
TLGE62T(T)
TLOE11T(T)
TLOE156A(T)
TLOE157A(T)
TLOE16C(T)
TLOE16T(T)
TLOE17T(T)
TLOE180A(T)
TLOE20T(T)
TLOE25T(T)
TLOE266(T)
TLOE27C(T)
TLOE50T(T)
TLOE53T(T)
TLOE60T(T)
TLOE62T(T)
TLOH156(T)
TLOH157(T)
TLOH180(T)
Straight Type
With Lead Stopper Type
TLPGE11T(T)
TLPGE158(T)
TLPGE159(T)
TLPGE183(T)
TLPGE18T(T)
TLPGE19T(T)
TLPGE23T(T)
TLPGE50T(T)
TLPGE53T(T)
TLPGE62T(T)
TLRE11T(T)
TLRE156A(T)
TLRE157A(T)
TLRE16C(T)
TLRE16T(T)
TLRE17T(T)
TLRE180A(T)
TLRE20T(T)
TLRE25T(T)
TLRE27C(T)
TLRE50T(T)
TLRE53T(T)
TLRE60T(T)
TLRE62T(T)
TLRH156(T)
TLRH157(T)
TLRH180(T)
TLRH262(T)
TLRME16C(T)
TLRME16T(T)
TLRME17D(T)
TLRME17T(T)
TLRME20T(T)
TLRME27C(T)
TLRME50T(T)
TLRME53T(T)
TLRME62T(T)
Straight Type
With Lead Stopper Type
TLRMH151(T)
TLRMH156(T)
TLRMH157(T)
TLSE156(T)
TLSE157(T)
TLSE16C(T)
TLSE16T(T)
TLSE17T(T)
TLSE180(T)
TLSE20T(T)
TLSE27C(T)
TLSE50T(T)
TLSE53T(T)
TLSE62T(T)
TLSH156(T)
TLSH157(T)
TLSH180(T)
TLYE11T(T)
TLYE156A(T)
TLYE157A(T)
TLYE16C(T)
TLYE16T(T)
TLYE17T(T)
TLYE180A(T)
TLYE20T(T)
TLYE25T(T)
TLYE260A(T)
TLYE262A(T)
TLYE27C(T)
TLYE50T(T)
TLYE53T(T)
TLYE60T(T)
TLYE62T(T)
TLYH151(T)
TLYH156(T)
TLYH157(T)
TLYH180(T)
Straight Type
TLRMH151P(T)
TLRMH156P(T)
TLRMH157P(T)
TLSE156P(T)
TLSE157P(T)
TLSE16CP(T)
TLSE16TP(T)
TLSE17TP(T)
TLSE180P(T)
TLSE20TP(T)
TLPGE11TP(T)
TLPGE158P(T)
TLPGE159P(T)
TLPGE183P(T)
TLPGE18TP(T)
TLPGE19TP(T)
TLPGE23TP(T)
TLGE11TP(T)
TLGE158P(T)
TLGE159P(T)
TLGE174P(T)
TLGE183P(T)
TLGE18CP(T)
TLGE18TP(T)
TLGE19TP(T)
TLGE23TP(T)
TLGE25TP(T)
TLRE11TP(T)
TLRE156AP(T)
TLRE157AP(T)
TLRE16CP(T)
TLRE16TP(T)
TLRE17TP(T)
TLRE180AP(T)
TLRE20TP(T)
TLRE25TP(T)
TLSH156P(T)
TLSH157P(T)
TLSH180P(T)
TLYE11TP(T)
TLYE156AP(T)
TLYE157AP(T)
TLYE16CP(T)
TLYE16TP(T)
TLYE17TP(T)
TLYE180AP(T)
TLYE20TP(T)
TLYE25TP(T)
TLOE11TP(T)
TLOE156AP(T)
TLOE157AP(T)
TLOE16CP(T)
TLOE16TP(T)
TLOE17TP(T)
TLOE180AP(T)
TLOE20TP(T)
TLOE25TP(T)
TLOE266P(T)
TLRH156P(T)
TLRH157P(T)
TLRH180P(T)
TLRME16CP(T)
TLRME16TP(T)
TLRME17DP(T)
TLRME17TP(T)
TLRME20TP(T)
TLYH151P(T)
TLYH156P(T)
TLYH157P(T)
TLYH180P(T)
TLOH156P(T)
TLOH157P(T)
TLOH180P(T)
48
Application Note
8
●●Considerations for Selecting of SMD Lamps
Conditions required
in applications
Recommend LED Lamp Series
TL●U1002A Series
TL●E1002A Series
TL●U1008A Series
TL●E1008A Series
TL●●1100 Series
High intensity /
wide directivity
Used for backlight
Brightness
Narrow
directivity
TL●U1005A Series
TL●E1005A Series
TL●●1102 Series
High intensity
application
LED direct
Wide
directivity
Low intensity
application
TL●1002A Series
High intensity
application
TL●E1002A Series
TL●E1008A Series
TL●●1002A Series
TL●●1008A Series
TL●●1100 Series
Used for backlight
Wide directivity
Directivity
Reliability
LED
directly viewed
Medium to wide
directivity
TL●●1005B Series
TL●●1102 Series
TL●U1002A Series
TL●E1002A Series
Long term
operation
For display
TL●1100 Series
TL●1102 Series
For automotive
Miniature/slim
2.0
1.6
3.2 2.4 2.4 mm
X
1.25
X
1.1 mm
TL●●1002A Series
TL●●1008A Series
X
0.8
X
0.6 mm
Package Size
Replacement
for lead type
X
X
TL●●1005B Series
TL●●1102 Series
with ø2 lens
3.2 2.8 3.4 mm
X
X
with ø2.8 lens
One rank width set
Luminance
rank selection
in surface
in accordance with the
sensitivity of the human eye.
Normally selected to within
two ranks.
Luminance
Fluctuation
Nonuniformity
in surface
All products
Selections in the dominant
wavelength (λd) can be made on request.
Color
Fluctuation
Wavelength
rank selection
in surface
Nonuniformity
in surface
Inquire at a Toshiba sales office.
Low-Power
Consumption
Miniature battery-
operated equipment
TL●E1002A Series
TL●E1008A Series
Low-current driving
49
Product Number Index
9
Product Number
Page
Product Number
Page
22
Product Number
TLOE60T
Page
18
Product Number
TLPGE158P
TLPGE159P
TLPGE160
Page
22
22
22
22
22
22
22
22
22
22
22
22
22
22
●●
Series
S4F
TLGE68TG
34
34
36
36
●●
Series
18
S4F42Q1(T09)
S4F42Z1(T09)
S4F43Q1(T10)
S4F43Z1(T10)
TLGU
TLOE62T
30
28
28
34
36
24
24
24
24
24
24
24
24
24
24
24
●●
TLOH
Series
TLGU1002A(T02)
TLGU1008A(T04)
TLGU1008A(T05)
TLGU1100(T09)
TLGU1102(T10)
TLGU13CP
TLGU13DP
TLGU18CP
TLGU18TP
34
36
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
TLOH1100(T09)
TLOH1102(T10)
TLOH156P
TLPGE183P
TLPGE183P(ST)
TLPGE18TP
TLPGE19TP
TLPGE23TP
TLPGE247
●●
TLAU
Series
30
28
28
TLAU1002A(T02)
TLAU1008A(T04)
TLAU1008A(T05)
TLOH156P(ST)
TLOH157P
TLOH157P(TU)
TLOH160
●●
TLFGE
Series
TLPGE247(LM)
TLPGE262
22
22
22
22
22
22
TLFGE18TP
TLFGE19TP
TLFGE23TP
TLFGE50T
TLFGE53T
TLFGE62T
TLOH160(TU)
TLOH16TP
TLGU23TP
TLPGE50T
TLGU27C
TLOH17TP
TLPGE53T
TLGU50T
TLOH180P
TLPGE62T
●● Series
TLPGU
TLGU53C
TLOH180P(VW)
TLOH190P
30
28
28
34
36
24
24
24
24
24
24
24
24
24
TLGU53D
TLPGU1002A(T02)
TLPGU1008A(T04)
TLPGU1008A(T05)
TLPGU1100(T09)
TLPGU1102(T10)
TLPGU13CP
●●
TLGE
Series
TLGU53T
TLOH190P(XY)
TLOH20TP
30
32
28
28
34
36
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
TLGE1002A(T02)
TLGE1005B(T03)
TLGE1008A(T04)
TLGE1008A(T05)
TLGE1100(T11)
TLGE1102(T10)
TLGE11TP
TLGE123
TLGU62T
●●
TLOE
Series
TLOH262
30
32
28
28
34
36
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
TLOE1002A(T02)
TLOE1005B(T03)
TLOE1008A(T04)
TLOE1008A(T05)
TLOE1100(T11)
TLOE1102(T10)
TLOE11TP
TLOH262(PQ)
TLOH38TP
●●
TLOU
Series
TLPGU13DP
30
32
28
28
34
36
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
TLOU1002A(T02)
TLOU1005A(T03)
TLOU1008A(T04)
TLOU1008A(T05)
TLOU1100(T09)
TLOU1102(T10)
TLOU113P
TLPGU18TP
TLPGU23TP
TLPGU50T
TLGE123(PQ)
TLGE125
TLPGU53C
TLOE156AP
TLOE156AP(RS)
TLOE157AP
TLOE157AP(ST)
TLOE160A
TLPGU53D
TLGE125(QR)
TLGE158P
TLPGU53T
TLPGU62T
●● Series
TLPYE
TLGE158P(QR)
TLGE159P
TLOU113P(RS)
TLOU114P
20
20
20
20
20
20
TLPYE18T
TLPYE19TP
TLPYE23TP
TLPYE50T
TLPYE53T
TLPYE62T
TLGE159P(ST)
TLGE160
TLOE160A(ST)
TLOE16CP
TLOU114P(NP)
TLOU123
TLGE160(TU)
TLGE174P
TLOE16TP
TLOU124
TLOE17TP
TLOU156P
TLGE183P
TLOE180AP
TLOE180AP(UV)
TLOE20TP
TLOU156P(RS)
TLOU160
●●
TLRE
Series
TLGE18CP
TLGE18TP
TLGE19TP
TLGE23TP
TLGE247
30
32
20
20
34
36
16
16
16
16
16
16
16
16
16
16
TLOU172P
TLRE1002A(T02)
TLRE1005B(T03)
TLRE1008A(T04)
TLRE1008A(T05)
TLRE1100(T11)
TLRE1102(T10)
TLRE11TP
TLOE248
TLOU180P
TLOE25TP
TLOU180P(UV)
TLOU248
TLOE260A
TLGE247(PQ)
TLGE248
TLOE260A(LM)
TLOE261AP
TLOE261AP(LM)
TLOE262A
TLOU262
TLOU262(PQ)
TLOU267
TLGE25TP
TLGE260
●●
TLPGE
Series
TLRE138P
30
32
28
28
34
36
22
22
TLGE260(KL)
TLGE262
TLOE262A(PQ)
TLOE263AP
TLOE263AP(PQ)
TLOE266
TLPGE1002A(T02)
TLPGE1005B(T03)
TLPGE1008A(T04)
TLPGE1008A(T05)
TLPGE1100(T11)
TLPGE1102(T10)
TLPGE11TP
TLRE156AP
TLRE156AP(PQ)
TLRE157AP
TLGE262(NP)
TLGE27C
TLRE157AP(RS)
TLRE160A
TLGE50T
TLOE266(RS)
TLOE27C
TLGE53T
TLRE160A(RS)
TLRE16CP
TLGE60T
TLOE50T
TLGE62T
TLOE53T
TLPGE125
TLRE16TP
50
Product Number
TLRE17TP
TLRE180AP
TLRE180AP(TU)
TLRE20TP
TLRE248
Page
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
34
36
14
14
14
14
14
14
14
14
14
14
14
14
14
14
Product Number
Page
30
Product Number
TLSU126
Page
14
14
14
14
14
14
14
14
14
14
14
Product Number
TLYH157P
Page
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
●●
Series
TLRU
TLRU1002A(T02)
Series
TLSU156P
TLSU156P(QR)
TLSU160
TLYH157P(TU)
TLYH160
●●
TLSE
30
32
28
28
34
36
16
16
16
16
16
16
16
16
16
16
16
16
16
TLSE1002A(T02)
TLSE1005B(T03)
TLSE1008A(T04)
TLSE1008A(T05)
TLSE1100(T11)
TLSE1102(T10)
TLSE156P
TLYH160(TU)
TLYH16TP
TLSU163
TLRE25TP
TLRE260A
TLRE261AP
TLRE262A
TLRE262A(MN)
TLRE263AP
TLRE263AP(MN)
TLRE27C
TLSU164
TLYH17TP
TLSU180P
TLSU180P(TU)
TLSU262
TLYH180P
TLYH180P(VW)
TLYH190P
TLSU262(NP)
TLSU268G
TLYH190P(XY)
TLYH20TP
TLSE156P(RS)
TLSE157P
●●
TLYE
Series
TLYH247
30
32
28
28
34
36
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
TLSE157P(ST)
TLSE16CP
TLYE1002A(T02)
TLYE1005B(T03)
TLYE1008A(T04)
TLYE1008A(T05)
TLYE1100(T11)
TLYE1102(T10)
TLYE11TP
TLYH247(QR)
TLYH262
TLRE50T
TLRE53T
TLSE16TP
TLYH262(PQ)
TLYH38TP
●● Series
TLYU
TLYU1002A(T02)
TLYU1005A(T03)
TLYU1008A(T04)
TLYU1008A(T05)
TLYU1100(T09)
TLYU1102(T10)
TLYU113P
TLRE60T
TLSE17TP
TLRE62T
TLSE180P
●●
TLRH
Series
30
32
28
28
34
36
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
TLSE20TP
TLRH1100(T09)
TLRH1102(T10)
TLRH156P
TLSE27C
TLSE50T
TLYE156AP
TLYE156AP(QR)
TLYE157AP
TLYE157AP(ST)
TLYE160A
TLSE53T
TLRH156P(QR)
TLRH157P
TLSE62T
●●
Series
TLSH
34
36
14
14
14
14
14
14
14
14
14
14
14
14
TLRH157P(ST)
TLRH160
TLSH1100(T09)
TLSH1102(T10)
TLSH125
TLYE160A(ST)
TLYE16CP
TLYU114P
TLRH160(ST)
TLRH180P
TLYU114P(MN)
TLYU123
TLSH156P
TLYE16TP
TLRH180P(UV)
TLRH190P
TLSH156P(RS)
TLSH157P
TLYE17TP
TLYU123(NP)
TLYU124
TLYE18TP
TLRH190P(WX)
TLRH247
TLSH157P(ST)
TLSH160
TLYE180AP
TLYE180AP(UV)
TLYE20TP
TLYU124(MN)
TLYU156P
TLRH247(PQ)
TLRH262
TLSH16TP
TLYU156P(QR)
TLYU160
TLSH17TP
TLYE25TP
TLRH262(NP)
TLSH180P
TLYE260A
TLYU160(ST)
TLYU172P
●●
TLRME
Series
TLSH180P(VW)
TLSH20TP
TLYE260A(KL)
TLYE261AP
TLYE261AP(JK)
TLYE262A
16
16
16
16
16
16
16
16
16
TLRME16TP
TLRME17DP
TLRME17TP
TLRME20TP
TLRME27C
TLRME50T
TLRME53T
TLRME62T
TLRME68TG
TLYU180P
TLSH38TP
TLYU180P(TU)
TLYU262
●●
Series
TLSU
30
32
28
28
34
36
14
14
14
14
14
14
14
14
14
TLSU1002A(T02)
TLSU1005A(T03)
TLSU1008A(T04)
TLSU1008A(T05)
TLSU1100(T09)
TLSU1102(T10)
TLSU113P
TLYE262A(NP)
TLYE263AP
TLYE263AP(NP)
TLYE27C
TLYU262(MN)
TLYU267
TLYE50T
TLYE53T
●●
TLRMH
Series
TLYE60T
14
14
14
14
14
14
14
14
TLRMH151P
TLRMH156P
TLRMH157P
TLRMH16TP
TLRMH17TP
TLRMH20TP
TLRMH265P
TLRMH38TP
TLSU114P
TLYE62T
TLSU114P(NP)
TLSU123
TLYE68TG
●●
TLYH
Series
34
36
20
20
20
TLSU123(PQ)
TLSU124
TLYH1100(T09)
TLYH1102(T10)
TLYH151P
TLSU124(MN)
TLSU125
TLYH156P
TLSU125(PQ)
TLYH156P(RS)
51
OVERSEAS SUBSIDIARIES AND AFFILIATES
010124 (H)
Toshiba Electronics Europe GmbH
Toshiba Electronics Asia, Ltd.
Toshiba America
Electronic Components, Inc.
Düsseldorf Head Office
Hansaallee 181, D-40549 Düsseldorf
Germany
Hong Kong Head Office
Level 11, Top Glory Insurance Building, Grand Century
Place, No.193, Prince Edward Road West,
Mong Kok, Kowloon, Hong Kong
Headquarters-Irvine, CA
9775 Toledo Way, Irvine, CA 92618, U.S.A.
Tel: (0211)5296-0 Fax: (0211)5296-400
Tel: (949)455-2000 Fax: (949)859-3963
MünchenOffice
Tel: 2375-6111 Fax: 2375-0969
Boulder, CO
Büro München Hofmannstrasse 52,
D-81378, München, Germany
Tel: (089)748595-0 Fax: (089)748595-42
Beijing Office
3100ArapahoeAvenue,Ste.500,
Boulder, CO 80303, U.S.A.
Tel: (303)442-3801 Fax: (303)442-7216
Rm 714, Beijing Fortune Building,
No.5 Dong San Huan Bei-Lu, Chao Yang District,
Beijing, 100004, China
Toshiba Electronics France SARL
Immeuble Robert Schumann 3 Rue de Rome,
F-93561, Rosny-Sous-Bois, Cedex, France
Tel: (1)48-12-48-12 Fax: (1)48-94-51-15
BoyntonBeach,FL(Orlando)
11924 W. Forest Hill Blvd., Ste. 22-337,
BoyntonBeach, FL33414, U.S.A.
Tel: (010)6590-8795 Fax: (010)6590-8791
ChengduOffice
Unit F, 18th Floor, New Times Plaza, 42 Wenwu Road,
XinhuaAvenue, Chengdu, 610017, China
Tel: (028)675-1773 Fax: (028)675-1065
Tel: (561)374-6193 Fax: (561)374-6194
Toshiba Electronics Italiana S.R.L.
Centro Direzionale Colleoni
Deerfield, IL(Chicago)
One Pkwy., North, Suite 500, Deerfield,
Palazzo Perseo Ingr. 2-Piano 6,
Via Paracelso n.12,
Shenzhen Office
IL60015-2547,U.S.A.
Rm 3010-3012, Office Tower Shun Hing Square,
Di Wang Commercial Centre, 333 ShenNan
EastRoad, Shenzhen, 518008, China
Tel: (0755)246-1582 Fax: (0755)246-1581
Tel: (847)945-1500 Fax: (847)945-1044
1-20041 Agrate Brianza Milan, Italy
Tel:(039)68701 Fax:(039)6870205
Duluth, GA(Atlanta)
3700 Crestwood Parkway, Ste. 460,
Toshiba Electronics España, S.A.
Duluth, GA 30096, U.S.A.
Parque Empresarial San Fernando Edificio Europa,
a
Tel: (770)931-3363 Fax: (770)931-7602
1
Planta, ES-28831 Madrid, Spain
Toshiba Electronics Korea Corporation
Tel: (91)660-6700 Fax:(91)660-6799
Edison, NJ
2035 Lincoln Hwy. Ste. #3000, Edison
Seoul Head Office
14/F, KEC B/D, 257-7 Yangjae-Dong,
Toshiba Electronics(UK) Limited
Riverside Way, Camberley Surrey,
GU15 3YA, U.K.
NJ 08817, U.S.A.
Seocho-ku, Seoul, Korea
Tel: (732)248-8070 Fax: (732)248-8030
Tel: (02)589-4334 Fax: (02)589-4302
Tel: (01276)69-4600 Fax: (01276)69-4800
Orange County, CA
2 Venture Plaza, #500 Irvine, CA 92618, U.S.A.
Gumi Office
Toshiba Electronics Scandinavia AB
Gustavslundsvägen 12, 2nd Floor
S-161 15 Bromma, Sweden
6/F, Ssangyong Investment Securities B/D,
56 Songjung-Dong, Gumi City
Kyeongbuk,Korea
Tel: (949)453-0224 Fax: (949)453-0125
Portland, OR
Tel: (08)704-0900 Fax: (08)80-8459
Tel:(82)54-456-7613 Fax: (82)54-456-7617
1700 NW 167th Place, #240,
Beaverton, OR 97006, U.S.A.
Tel: (503)629-0818 Fax: (503)629-0827
Toshiba Electronics Asia
(Singapore) Pte. Ltd.
Singapore Head Office
438BAlexandraRoad, #06-08/12Alexandra
Technopark,Singapore119968
Tel: (278)5252 Fax: (271)5155
Toshiba Technology Development
(Shanghai) Co., Ltd.
23F, ShanghaiSenmaoInternationalBuilding, 101
Yin Cheng East Road, Pudong New Area, Shanghai,
200120,China
Raleigh, NC
5511 Capitol Center Dr., #114,
Raleigh, NC 27606, U.S.A.
Tel: (919)859-2800 Fax: (919)859-2898
Tel: (021)6841-0666 Fax: (021)6841-5002
BangkokOffice
Richardson, TX(Dallas)
777 East Campbell Rd., Suite 650, Richardson,
TX75081, U.S.A.
135 Moo 5 Bangkadi Industrial Park, Tivanon Rd.,
BangkadiAmphurMuangPathumthani, Bangkok, 12000,
Thailand
Tsurong Xiamen Xiangyu Trading
Co., Ltd.
8N, Xiamen SEZ Bonded Goods Market Building,
Tel: (972)480-0470 Fax: (972)235-4114
Tel: (02)501-1635 Fax: (02)501-1638
Xiamen, Fujian, 361006, China
San Jose Engineering Center, CA
1060 Rincon Circle, San Jose, CA 95131, U.S.A.
Tel: (408)526-2400 Fax:(408)526-2410
Tel: (0592)562-3798 Fax: (0592)562-3799
Toshiba Electronics Trading
(Malaysia)Sdn. Bhd.
Kuala Lumpur Head Office
Suite W1203, Wisma Consplant, No.2,
Jalan SS 16/4, Subang Jaya, 47500 Petaling Jaya,
Selangor Darul Ehsan, Malaysia
Toshiba Electronics Taiwan
Corporation
Wakefield,MA(Boston)
401 Edgewater Place, Suite #360, Wakefield,
Taipei Head Office
MA01880-6229, U.S.A.
17F, Union Enterprise Plaza Bldg. 109
Min Sheng East Rd., Section 3, 0446 Taipei,
Taiwan
Tel: (781)224-0074 Fax: (781)224-1095
Tel: (3)731-6311 Fax: (3)731-6307
Penang Office
Tel: (02)514-9988 Fax: (02)514-7892
Suite 13-1, 13th Floor, Menard Penang Garden,
42-A, Jalan Sultan Ahmad Shah,
100 50 Penang, Malaysia
Toshiba Do Brasil S.A.
KaohsiungOffice
16F-A, Chung-Cheng Bldg., Chung-Cheng 3Rd.,
Electronic Components Div.
Estrada Dos Alvarengas, 5. 500-Bairro Alvarenga
09850-550-Sao Bernardo do campo - SP
Tel: (011)7689-7171 Fax: (011)7689-7189
80027,Kaohsiung,Taiwan
Tel: 4-226-8523 Fax: 4-226-8515
Tel: (07)222-0826 Fax: (07)223-0046
Toshiba Electronics Philippines, Inc.
26th Floor, Citibank Tower, Valero Street, Makati,
Manila, Philippines
Tel: (02)750-5510 Fax: (02)750-5511
The information contained herein is subject to change without notice.
The information contained herein is presented only as a guide for the applications of our products.
No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others.
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in
general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the
responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for
the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of
human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used
within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind
the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor
Reliability Handbook" etc..
The Toshiba products listed in this document are intended for usage in general electronics applications (computer, personal
equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).
These Toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or
reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage
include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments,
combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of Toshiba products listed
in this document shall be made at the customer’s own risk.
Electronic Devices Sales & Marketing Division
1-1, Shibaura 1-chome, Minato-ku, Tokyo, 105-8001, Japan
Tel: +81-3-3457-3405 Fax: +81-3-5444-9431
Gallium arsenide (GaAs) is a substance used in some of the products described in this documents. GaAs dust and fumes are toxic. Do not break, cut or pulverize the products, or use chemicals to dissolve them.
When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage.
Website: http://doc.semicon.toshiba.co.jp/indexus.htm
©2001TOSHIBACORPORATION
Printed in Japan
相关型号:
TLGU50T(F)
Visible LED, T-1 SINGLE COLOR LED, GREEN, 3 mm, LEAD FREE, PLASTIC, 4-3E1A, 2 PIN
TOSHIBA
TLGU53C(F)
Visible LED, T-1 SINGLE COLOR LED, GREEN, 3 mm, LEAD FREE, PLASTIC, 4-4E1A, 2 PIN
TOSHIBA
TLGU53D(F)
Visible LED, T-1 SINGLE COLOR LED, GREEN, 3 mm, LEAD FREE, PLASTIC, 4-4E1A, 2 PIN
TOSHIBA
TLGU53T(F)
Visible LED, T-1 SINGLE COLOR LED, GREEN, 3 mm, LEAD FREE, PLASTIC, 4-4E1A, 2 PIN
TOSHIBA
©2020 ICPDF网 联系我们和版权申明