TLOE1002A [TOSHIBA]
Panel Circuit Indicator; 面板指示灯电路
| 型号： | TLOE1002A |
| 厂家： | 
TOSHIBA |
| 描述： | Panel Circuit Indicator |
| 文件： | 总18页 (文件大小：314K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TOSHIBA LED Lamps
TLRE1002A(T02), TLSE1002A(T02),
TLOE1002A(T02), TLYE1002A(T02), TLPYE1002A(T02),
TLGE1002A(T02), TLFGE1002A(T02), TLPGE1002A(T02)
Unit: mm
Panel Circuit Indicator
•
•
•
•
Surface-mount devices
2.0 (L) × 1.25 (W) × 1.1 (H) mm
InGaAℓP LEDs
It can be manufactured high-luminosity of equipment or reduce
of electric power consumption by change in the high-luminosity
LED from general-luminosity one.
•
•
•
Colors: red, orange, yellow, pure yellow, green, pure green
Pb-free reflow soldering is possible
Applications:
Backlighting source for battery-powered equipment
Pilot light for compact equipment
Low-power electronic equipment, etc.
Standard embossed tape packing: T02 (3000/reel)
8-mm tape reel
•
JEDEC
―
―
JEITA
Color and Material
TOSHIBA
4-1D1
Product Name
Color
Material
Weight: 0.002 g (typ.)
TLRE1002A
TLSE1002A
TLOE1002A
TLYE1002A
TLPYE1002A
TLGE1002A
TLFGE1002A
TLPGE1002A
Red
Red
Orange
Yellow
InGaAℓP
Pure Yellow
Green
Green
Pure Green
1
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
Maximum Ratings (Ta = 25°C)
Forward Current
Operation
Temperature
Storage
Temperature
Reverse Voltage
(V)
Power Dissipation
(mW)
I
(mA)
Product Name
F
V
P
D
R
T
opr
(°C)
T
stg
(°C)
Please see Note 1
TLRE1002A
TLSE1002A
TLOE1002A
TLYE1002A
TLPYE1002A
TLGE1002A
TLFGE1002A
TLPGE1002A
25
4
60
−40~85
−40~100
Note 1: Forward current derating
I
– Ta
F
40
30
20
10
0
0
20
40
60
80
100
Ambient temperature Ta (°C)
Electrical Characteristics (Ta = 25°C)
Reverse Current
Forward Voltage V
F
I
R
Product Name
Min
1.6
1.6
1.6
1.6
1.6
1.6
1.6
1.6
Typ.
1.9
1.9
2.0
2.0
2.0
2.0
2.0
2.1
V
Min
2.4
2.4
2.4
2.4
2.4
2.4
2.4
2.4
I
Max
V
R
F
TLRE1002A
TLSE1002A
TLOE1002A
TLYE1002A
TLPYE1002A
TLGE1002A
TLFGE1002A
TLPGE1002A
Unit
20
50
4
mA
μA
V
2
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
Optical Characteristics–1 (Ta = 25°C)
Luminous Intensity I
Available Iv rank
V
Product Name
Please see Note 2
Min
27.2
47.6
47.6
27.2
27.2
27.2
8.5
Typ.
70
Max
⎯
I
F
TLRE1002A
TLSE1002A
TLOE1002A
TLYE1002A
TLPYE1002A
TLGE1002A
TLFGE1002A
TLPGE1002A
Unit
20
20
20
20
20
20
20
20
mA
L / M / N / P
M / N / P / Q
M / N / P / Q
L / M / N / P
L / M / N / P
L / M / N / P
J / K / L / M
H / J / K / L
140
180
105
70
⎯
⎯
⎯
⎯
70
⎯
25
⎯
4.76
mcd
18
⎯
mcd
mcd
Note 2: The specification on the above table is used for Iv classification of LEDs in Toshiba facility.
Each reel includes the same rank LEDs. Let the delivery ratio of each rank be unquestioned.
Luminous Intensity I
V
Rank
Min
4.76
8.5
Max
H
J
12.9
23
K
15.3
27.2
47.6
85
41.4
73.6
129
230
414
736
mcd
L
M
N
P
153
272
mcd
Q
Unit
Optical Characteristics–2 (Ta = 25°C)
Emission Spectrum
Peak Emission
Product Name
Dominant Wavelength λ
Δλ
Typ.
18
d
Wavelength λ
I
p
F
Min
Typ.
Max
Min
624
Typ.
630
Max
638
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
TLRE1002A
TLSE1002A
TLOE1002A
TLYE1002A
TLPYE1002A
TLGE1002A
TLFGE1002A
TLPGE1002A
Unit
644
⎯
⎯
⎯
⎯
⎯
⎯
⎯
623
612
590
583
574
568
562
nm
17
15
13
13
11
11
11
nm
607
599
581
574
565
559
⎯
613
605
587
580
571
565
558
nm
621
613
595
586
576
571
564
20
mA
The cautions
•
This visible LED lamp also emits some IR light.
If a photodetector is located near the LED lamp, please ensure that it will not be affected by the IR light.
This product is designed as a general display light source usage, and it has applied the measurement standard
that matched with the sensitivity of human's eyes. Therefore, it is not intended for usage of functional
application (ex. Light source for sensor, optical communication and etc) except general display light source.
•
3
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLRE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
50
100
Ta = 25°C
Ta = 25°C
30
10
50
30
10
5
3
5
3
1
1.6
1
1
1.7
1.8
1.9
2.0
2.1
2.2
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
3
1
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
0.5
0.3
0.1
0
580
−20
0
20
40
60
80
100
600
620
640
660
680
700
Case temperature Tc (°C)
Wavelength
λ (nm)
4
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLSE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
100
300
100
Ta = 25°C
Ta = 25°C
50
30
50
30
10
5
3
10
5
3
1
1.6
1.7
1.8
1.9
2.0
2.1
2.2
1
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
3
1
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
0.5
0.3
0.1
0
580
−20
0
20
40
60
80
100
600
620
640
660
680
700
Case temperature Tc (°C)
Wavelength
λ (nm)
5
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLOE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
100
300
100
Ta = 25°C
Ta = 25°C
50
30
50
30
10
5
3
10
5
3
1
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
0
540
−20
0
20
40
60
80
100
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
λ (nm)
6
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLYE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
100
300
100
Ta = 25°C
Ta = 25°C
50
30
50
30
10
5
3
10
5
3
1
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
0
540
−20
0
20
40
60
80
100
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
λ (nm)
7
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLPYE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
100
300
100
Ta = 25°C
Ta = 25°C
50
30
50
30
10
5
3
10
5
3
1
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
0
540
−20
0
20
40
60
80
100
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
λ (nm)
8
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLGE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
100
300
100
Ta = 25°C
Ta = 25°C
50
30
50
30
10
5
3
10
5
3
1
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
0
540
−20
0
20
40
60
80
100
560
580
600
620
Case temperature Tc (°C)
Wavelength
λ (nm)
9
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLFGE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
100
30
10
Ta = 25°C
Ta = 25°C
50
30
5
3
10
5
3
1
0.5
0.3
1
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
0
520
−20
0
20
40
60
80
100
540
560
580
600
Case temperature Tc (°C)
Wavelength
λ (nm)
10
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TLPGE1002A
I
– V
I – I
V F
F
F
(typ.)
(typ.)
100
30
10
Ta = 25°C
Ta = 25°C
50
30
5
3
10
5
3
1
0.5
0.3
1
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30
50
100
Forward voltage
V
(V)
Forward current
I
(mA)
F
F
I
– Tc
Wavelength characteristic
V
(typ.)
(typ.)
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
0
520
−20
0
20
40
60
80
100
540
560
580
600
Case temperature Tc (°C)
Wavelength
λ (nm)
11
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
Radiation Pattern
Horizontal to polarity
Ta=25℃
Vertical to polarity
(typ.)
(typ.)
0°
10°
0°
10°
10°
10°
20°
20°
20°
20°
30°
40°
30°
30°
30°
40°
40°
40°
50°
50°
50°
50°
60°
70°
80°
90°
60°
70°
80°
90°
60°
70°
80°
60°
70°
80°
90°
1.0
90°
1.0
0
0.2
0.4
0.6
0.8
0
0.2
0.4
0.6
0.8
12
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
Packaging
These LED devices are packed in an aluminum envelope with a silica gel and a moisture indicator to avoid
moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air
before soldering and they should therefore be stored under the following conditions:
1. This moisture proof bag may be stored unopened within 12 months at the following conditions.
Temperature: 5°C~30°C
Humidity: 90% (max)
2. After opening the moisture proof bag, the devices should be assembled within 168 hours in an environment of
5°C to 30°C/70% RH or below.
When performing lead(Pb)-free soldering, the devices should be assembled within 72 hours in an environment
of 5°C to 30°C/70% RH or below.
3. If upon opening, the moisture indicator card shows humidity 30% or above (Color of indication changes to
pink) or the expiration date has passed, the devices should be baked in taping with reel.
After baking, use the baked devices within 72 hours, but perform baking only once.
Baking conditions: 60±5°C, for 12 to 24 hours.
Expiration date: 12 months from sealing date, which is imprinted on the same side as this label affixed.
4. Repeated baking can cause the peeling strength of the taping to change, then leads to trouble in mounting.
Furthermore, prevent the devices from being destructed against static electricity for baking of it.
5. If the packing material of laminate would be broken, the air tightness would deteriorate. Therefore, do not
throw or drop the packed devices.
Mounting Method
Soldering
•
Reflow soldering (example)
Temperature profile for Pb soldering (example)
10 s max
(*)
(*)
240°C max
(*)
140~160°C max
(*)
4°C/s max
4°C/s max
(*)
(*)
60~120 s max
Time (s)
•
The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the
condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under
the above conditions.
•
•
Please perform the first reflow soldering with reference to the above temperature profile and within 168 h of
opening the package.
Second reflow soldering
In case of second reflow soldering should be performed within 168 h of the first reflow under the above
conditions.
Storage conditions before the second reflow soldering: 30°C, 70% RH (max)
Make any necessary soldering corrections manually.
(only once at each soldering point)
Soldering iron: 25 W
•
•
Temperature : 300°C or less
Time
: within 3 s
Do not perform wave soldering.
13
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
•
Reflow soldering (example)
Temperature profile for Pb-free soldering (example)
5 s max
(*)
(*)
260°C max
4°C/s max(*)
(*)
230°C
150~180°C max
(*)
4°C/s max
(*)
60~120 s max
30~50 s max
(*)
Time (s)
•
The products are evaluated using above reflow soldering conditions. No additional test is performed exceed the
condition (i.e. the condition more than (*)MAX values) as a evaluation. Please perform reflow soldering under
the above conditions.
•
•
Please perform the first reflow soldering with reference to the above temperature profile and within 72 h of
opening the package.
Second reflow soldering
In case of second reflow soldering should be performed within 72 h of the first reflow under the above conditions.
Storage conditions before the second reflow soldering: 30°C, 70% RH (max)
Make any necessary soldering corrections manually.
(only once at each soldering point)
•
•
Soldering iron: 25 W
Temperature : 300°C or less
Time
: within 3 s
Do not perform wave soldering.
Recommended soldering pattern
Unit: mm
1.2
1.0
1.2
(1.2)
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents.
It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the
recommended conditions). In selecting the one for your actual usage, please perform sufficient review
on washing condition, using condition and etc.
ASAHI CLEAN AK-225AES
KAO CLEAN TROUGH 750H
PINE ALPHA ST-100S
TOSHIBA TECHNOCARE
(FRW-17, FRW-1, FRV-100)
: (made by ASAHI GLASS)
: (made by KAO)
: (made by ARAKAWA CHEMICAL)
: (made by GE TOSHIBA SILICONES)
Precaution when mounting
Do not apply force to the plastic part of the LED under high-temperature conditions.
To avoid damaging the LED plastic, do not apply friction using a hard material.
When installing the PCB in a product, ensure that the device does not come into contact with other cmponents.
14
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
Tape Specifications
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The
method of classification is as below. (However, this method does not apply to products whose
electrical/optical characteristics differ from standard Toshiba specifications)
(1) Tape Type: T02 (4-mm pitch)
(2) Example
TLRE1002A (T02)
Tape type
Toshiba product No.
2. Handling precautions
Tape material protected against static electricity. However, static electricity may occur depending on
quantity of charged static electricity and a device may attach to a tape, or a device may be unstable when
peeling a tape cover.
(a) Since tape materials may accumulate an electrostatic charge, use an ionizer to neutralize the ambient
air.
(b) For transport and temporary storage of devices, use containers (boxes and bags) and jigs that are
made of anti-static materials or of materials which dissipate electrostatic charge.
3. Tape dimensions
Unit: mm
Symbol
Value
1.50
1.75
4.00
0.20
3.50
1.10
Tolerance
+0.1/−0
±0.1
Symbol
Value
2.00
8.00
4.00
1.45
2.25
1.30
Tolerance
±0.05
±0.3
D
E
P
2
W
P
P
±0.1
±0.1
0
t
±0.05
±0.05
±0.1
A
B
K
±0.1
0
0
0
F
±0.1
D
1
±0.05
K
P
0
0
D
t
P
2
E
F
W
B
0
Polarity
P
D
1
A
0
15
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
4. Reel dimensions
Unit: mm
+0
−4
φ180
11.4 ± 1
9 ± 0.3
φ21 ± 0.8
φ13 ± 0.5
2 ± 0.5
5. Leader and trailer section of tape
40 mm or more
(Note 1)
40 mm or more
(Note 2)
Leading part 190 mm (min)
Note 1: Empty trailer section
Note 2: Empty leader section
16
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
6. Packing display
(1) Packing quantity
Reel
3,000 pcs
15,000 pcs
Carton
(2) Package form: Each reel is sealed in an aluminum pack with silica gel.
7. Label format
(1) Example: TLRE1002A (T02)
P/N:
TOSHIBA
TYPE
ADDC
TLRE1002A
(T02)
Q’TY
32C
3,000 pcs
3000
Lot Number
Key code for TSB
(RANK SYMBOL)
Use under 5-30degC/70%RH within 72h
SEAL DATE:
[[G]]/RoHS COMPATIBLE
*Y3804xxxxxxxxxxxxxxxxx*
DIFFUSED IN *****
ASSEMBLED IN *****
(2) Label location
•
Reel
• Carton
Tape reel direction
Label position
Label position
•
The aluminum package in which the reel is supplied also has a copy of the label
attached to center of one side.
17
2006-06-13
TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
18
2006-06-13
相关型号：
TLOE1002A(N-T02)
Visible LED, SINGLE COLOR LED, ORANGE, 1.4 mm, 2 X 1.25 MM, 1.10 MM HEIGHT, ROHS COMPLIANT, PLASTIC, 4-1D1, 2 PIN
TOSHIBA
TLOE1002A(T02)
Visible LED, SINGLE COLOR LED, ORANGE, 1.4 mm, 2 X 1.25 MM, 1.10 MM HEIGHT, ROHS COMPLIANT, PLASTIC, 4-1D1, 2 PIN
TOSHIBA
TLOE1005A(T03)
Visible LED, T-3/4 SINGLE COLOR LED, ORANGE, 2 mm, 3.20 X 2.40 MM, 2.40 MM HEIGHT, SURFACE MOUNT PACKAGE-2
TOSHIBA
©2020 ICPDF网 联系我们和版权申明