TLOH1050-(T)(T20) [TOSHIBA]
暂无描述;TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
TOSHIBA LED Lamp
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
○Panel Circuit Indicator
Unit: mm
•
•
5.2 (L) × 5.2 (W) × 4.0 (H) mm size
TL□H1050 (T20) Series
φ3.6 mm transparent lens top type
InGaAℓP LEDs
•
•
High Luminous Intensity and low power
consumption
•
•
•
Colors :Red, Orange, Yellow, Green
Clear luminescence is obtained
High Operating Temperature:
T
opr
T
stg
:
:
−40 to 100°C
−40 to 110°C
•
•
Can be mounted using surface mounter.
Standard Embossed Taping
8 mm pitch : T20 (400 pcs/reel)
Reflow Soldering is possible.
•
•
Applications: portable devices, backlighting,
message signboards and amusement etc.
Color and Material
Product Name
Color
Material
TLRMH1050
TLSH1050
TLOH1050
TLYH1050
TLGH1050
TLFGH1050
Red
Red
Orange
Yellow
Green
Green
InGaAℓP
JEDEC
―
JEITA
―
TOSHIBA
4-5AU1
Weight: 0.085g (typ.)
1
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
Absolute Maximum Ratings (Ta = 25°C)
Operating
Temperature
Topr (°C)
Storage
Temperature
Tstg (°C)
Forward Current
Reverse Voltage
Power Dissipation
(mW)
Product
Name
I (mA)
F
V (V)
R
P
D
TLRMH1050
TLSH1050
TLOH1050
TLYH1050
TLGH1050
TLFGH1050
50
4
120
−40 to 100
−40 to 110
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Forward current derating
I
– Ta
F
80
60
40
20
0
0
20
40
60
80
100
120
Ambient temperature Ta (°C)
Electrical Characteristics (Ta = 25°C)
Forward Voltage
V
F
Reverse Current
I
R
Product
Name
I
V
R
Min
1.7
1.7
Typ.
2.0
2.0
2.0
2.1
2.1
2.1
V
Max
Max
F
TLRMH1050
TLSH1050
TLOH1050
TLYH1050
TLGH1050
TLFGH1050
Unit
2.5
2.5
2.5
2.5
2.5
2.5
1.7
1.7
20
50
4
1.7
1.7
mA
μA
V
2
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
Optical Characteristics-1 (Ta = 25°C)
Luminous Intensity I
V
Corresponding brightness rank
sign (Note 2)
Product Name
Min
272
476
Typ
700
Max
2300
4140
4140
2300
1290
736
I
F
TLRMH1050
TLSH1050
TLOH1050
TLYH1050
TLGH1050
TLFGH1050
Unit
Q/R/S
R/S/T
R/S/T
R/S
1400
1500
1000
600
476
476
272
85
20
Q/R
250
N/P/Q
mcd
mA
Note 2: The brightness rank classification executes based on the following rank table, and
is classified by the reel.
However, the delivery ratio of each classification is not defined.
Brightness rank
Rank sign
Min
85
Max
230
N
P
153
272
476
850
1530
mcd
414
Q
736
R
1290
2300
4140
mcd
S
T
Unit
Optical Characteristics-2 (Ta = 25°C)
Emission Spectrum
Peak Emission Wavelength λ
Dominant Wavelength λ
d
Δλ
Product Name
p
Min
⎯
⎯
⎯
Typ.
636
623
612
590
574
568
nm
Max
⎯
⎯
⎯
Typ.
17
Min
620
607
599
581
565
559
Typ.
626
613
605
587
571
565
nm
Max
634
621
613
595
576
571
I
F
TLRMH1050
TLSH1050
TLOH1050
TLYH1050
TLGH1050
TLFGH1050
Unit
17
15
20
⎯
⎯
13
⎯
⎯
11
⎯
⎯
11
nm
mA
Caution
z This LED lamp emits some infrared light in addition to light in the visible spectrum. Ensure that this IR light
affects no photosensitive device used near the LED lamp.
z This product is a product developed as a display source of light usage, and the measurement standard matched
to the sensitivity of person eyes is applied.
Therefore, use to functional usages (source of light for the sensor and the communication) other than the source
of light for the display is not intended.
3
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
TLRMH1050
I
– I
F
I
– V
F
V
F
100
10000
1000
100
Ta = 25°C
Ta = 25°C
10
1
10
1.6
1.7
1.8
1.9
2.0
2.1
(V)
2.2
2.3
100
10
Forward current
1
Forward voltage
V
F
I
F
(mA)
Relative luminous intensity – wavelength
I
– Tc
V
10
1.0
0.8
0.6
0.4
0.2
0
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
−40 −20
0
20
40
60
80 100
580
600
620
640
660
(nm)
680
700
Case temperature Tc (°C)
Wavelength
λ
Radiation pattern
Ta = 25°C
0°
30°
30°
60°
60°
90
0 0.2 0.4 0.6 0.8 1.0
90
4
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
TLSH1050
I
– V
I – I
V F
F
F
100
10000
1000
100
Ta = 25°C
Ta = 25°C
10
1
10
1.8
1.9
2.0
2.1
(V)
1.6
1.7
2.2
2.3
1
10
Forward current
100
Forward voltage
V
F
I
F
(mA)
Relative luminous intensity – wavelength
I
– Tc
V
1.0
0.8
0.6
0.4
0.2
0
10
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
−40
580
600
620
640
660
680
700
−20
0
20
40
60
80
100
Case temperature Tc (°C)
Wavelength
λ
(nm)
Radiation pattern
Ta = 25°C
0°
30°
30°
60°
60°
90
0 0.2 0.4 0.6 0.8 1.0
90
5
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
TLOH1050
I
– V
I – I
V
F
F
F
100
10000
1000
Ta = 25°C
Ta = 25°C
10
100
10
1
1
100
10
1.9
Forward voltage
2.0
2.1
(V)
2.2
2.3
1.7
1.8
1.6
V
F
Forward current
I
F
(mA)
I
– Tc
V
Relative luminous intensity – wavelength
10
1.0
0.8
0.6
0.4
0.2
0
I
= 20 mA
F
5
3
Ta = 25°C
1
0.5
0.3
0.1
−40
−20
0
20
40
60
80
100
540
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
λ
(nm)
Radiation pattern
Ta = 25°C
0°
30°
30°
60°
60°
90
0 0.2 0.4 0.6 0.8 1.0
90
6
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
TLYH1050
I
– V
F
I
– I
F
F
V
10000
1000
100
100
Ta = 25°C
Ta = 25°C
10
1
10
1.6
1.7
1.8
1.9
2.0
2.1
(V)
2.2
2.3
1
10
Forward current
100
Forward voltage
V
F
I
F
(mA)
Relative luminous intensity – wavelength
I
– Tc
V
10
1.0
0.8
0.6
0.4
0.2
0
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
−40
−20
0
20
40
60
80
100
540
560
580
600
620
640
660
Case temperature Tc (°C)
Wavelength
λ
(nm)
Radiation pattern
Ta = 25°C
0°
30°
30°
60°
60°
90
0 0.2 0.4 0.6 0.8 1.0
90
7
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
TLGH1050
I
– V
I – I
V F
F
F
100
10000
1000
100
Ta = 25°C
Ta = 25°C
10
1
10
1.6
1.7
1.8
1.9
2.0
2.1
(V)
2.2
2.3
1
10
Forward current
100
Forward voltage
V
F
I
F
(mA)
Relative luminous intensity – wavelength
I
– Tc
V
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
−40
0
540
−20
0
20
40
60
80
100
560
580
600
620
Case temperature Tc (°C)
Wavelength
λ
(nm)
Radiation pattern
Ta = 25°C
0°
30°
30°
60°
60°
90
0 0.2 0.4 0.6 0.8 1.0
90
8
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
TLFGH1050
I
– V
I – I
V F
F
F
1000
100
Ta = 25°C
Ta = 25°C
100
10
10
1
1.6
1
100
10
Forward current
2.0
2.1
(V)
1
1.7
1.8
1.9
2.2
2.3
Forward voltage
V
F
I
F
(mA)
Relative luminous intensity – wavelength
I
– Tc
V
10
1.0
0.8
0.6
0.4
0.2
I
= 20 mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
−40
0
520
−20
0
20
40
60
80
100
540
560
580
600
Case temperature Tc (°C)
Wavelength
λ (nm)
Radiation pattern
Ta = 25°C
0°
30°
30°
60°
60°
90
0 0.2 0.4 0.6 0.8 1.0
90
9
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
Packaging
These LED devices are packed in an aluminum envelope with silica gel and a moisture indicator to prevent
moisture absorption. The optical characteristics of the devices may be affected by exposure to moisture in the air
before soldering and they should therefore be stored under the following conditions:
1. This moisture-proof bag may be stored unopened for up to 12 months under the following conditions.
Temperature: 5°C~30°C
Humidity: 90% (max)
2. After the moisture-proof bag has been opened, the devices should be assembled within 72 hours in an
environment of 5°C to 30°C/70% RH or below.
3. If, upon opening, the moisture indicator card shows humidity of 30% or above (when the indication color
changes to pink) or the expiration date has passed, the devices should be baked while packed in the tape reel.
After baking, use the baked devices within 72 hours, but perform baking only once.
Baking conditions: 60 ±5°C, for 12 to 24 hours.
Expiration date: 12 months from the sealing date, which is imprinted on the same side as this label.
4. Repeated baking may cause the peeling strength of the tape to change, leading to trouble in mounting. Also,
be sure to prevent damage to the device from static electricity during the baking process.
5. Any breakage in the laminate packing material will cause the hermetically of the product to deteriorate. Do
not toss or drop the packed devices.
Mounting Method
Soldering
•
Reflow soldering (example)
Temperature profile for Pb soldering (example)
Temperature profile for Pb-free soldering (example)
(*)
(*)
10 s max
5 s max
(*)
(*)
240°C max
260°C max
(*)
4°C/s max
max(*)
max(*)
140~160°C
230°C
150~180°C
(*)
(*)
4°C/s max
4°C/s max
(*)
4°C/s max
max(*)
60~120 s
60~120 s
max(*)
30~50s max(*)
Time (s)
Time (s)
•
The product is evaluated using above reflow soldering conditions. No additional test is performed exceed the
condition (i.e. the condition more than (*)max values) as a evaluation. Please perform reflow soldering under
the above conditions.
•
•
Perform the first reflow soldering in accordance with the above temperature profile and within 72 hours of
opening the package.
Second time reflow
In case of second reflow soldering should be performed within 72 hours of the first reflow under the above
conditions.
Storage conditions before the second reflow soldering: 5~30°C, 70% RH max
•
•
Do not perform flow soldering and soldering dip.
Make any necessary soldering corrections manually.
(only once at each soldering point)
Soldering iron: Less than 25 W
Temperature : Less than 350°C or less
Time
: within 3 s (Up to once per place)
10
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
Recommended soldering pattern
Unit: mm
2.45
1.3
2.45
2.7
Cleaning
When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. Our
dipping tests (carried out under the recommended conditions) confirm that these solvents have no effect on
semiconductor devices. In selecting the cleaning solvent you will actually use, be sure to take into account
the cleaning conditions and usage conditions.
Cleaning Solvent
Manufacturer
ASAHI GLASS
KAO
ASAHI CLEAN AK-225AES
KAO CLEAN THROUGH 750H
PINE ALPHA ST-100S
ARAKAWA CHEMICAL
Precautions When Mounting
Do not apply force to plastic parts of the LED under high-temperature conditions.
The LED plastic is easily scratched. Avoid friction between plastic parts and hard objects or materials.
When installing the PCB in a product, ensure that the device does not come into contact with other components.
This product doesn't apply mounting that solder flow. Please mount on recommended reflow solder mounting
condition.
Tape Specifications
1. Product number format
The type of package used for shipment is denoted by a symbol suffix after the product number. The method
of classification is as below. (This method, however, does not apply to products whose electrical
characteristics differ from standard Toshiba specifications.)
(1) Tape Type: T20 (8-mm pitch)
(2) Example
TLRMH1050 (T20)
Tape type
Toshiba product No.
2. Handling precautions
Tape material protected against static electricity. However, static electricity may occur depending on
quantity of charged static electricity and a device may attach to a tape, or a device may be unstable
when peeling a tape cover.
(a) In process, taping materials may sustain an electrostatic charge, use an ionizer to
neutralize the ions.
(b) For transport and temporary storage of devices, use containers(boxes, jigs, and bags)
that are made of anti-static materials or of materials that dissipate electrostatic electricity.
11
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
3. Tape dimensions
(Unit: mm)
Symbol
Dimension
Tolerance
Symbol
Dimension
Tolerance
D
E
1.5
1.75
4.0
+0.1/−0
±0.1
P
2.0
12.0
8.0
5.5
±0.05
±0.2
±0.1
±0.1
±0.1
±0.1
2
W
P
P
±0.1
0
t
0.4
±0.05
±0.05
±0.1
A
B
K
0
0
0
F
5.5
5.5
D
1
1.6
4.4
K
P
0
0
D
t
P
2
E
F
W
B
0
POLARITY
P
D
1
A
0
12
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
4. Reel dimensions
Unit: mm
13 ± 0.3
15.4 ± 1.0
φ44
2 ± 0.5
5. Leader and trailer section of tape
40mm or more
(Note-2)
40mm or more
(Note-1)
Leading part 190 mm (min)
Note-1 : Empty trailer section
Note-2 : Empty leader section
13
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
6. Packing form
(1) Packing quantity
Reel
400 pcs
Carton
2,000 pcs
(2) Packing form: Each reel is sealed in an aluminum pack with silica gel.
7. Label format
(1)Example:TLRMH1050(T20)
P/N:
TYPE
TLRMH1050
ADDC
(T20)
Q’TY
32C
400 pcs
400
Lot Number
Key code for TSB
(RANK SYMBOL)
Use under 5-30degC/70%RH within 168h
SEALED
DIFFUSED IN *****
ASSEMBLED IN *****
[[G]]/RoHS COMPATIBLE
*Y380xxxxxxxxxxxxxxxxxx*
(2)Label location
•
Reel
•
Carton
Tape reel direction
Label position
Label position
•
The aluminum package in which the reel is supplied also has a copy of the label
attached to the center of one side.
*The Lot Number includes the following information.
Example: 270 7 B 3 B “Packaged February 22, 2007”
b c d e
a: Domestic ID
→
a
b: Last digit of the year (CE): “0” (Y2000), “1” (Y2001), “2” (Y2002) ~ “9” (Y2009)
Repeated for each decade
c: Month: “A” (Jan), “B” (Feb), “C” (Mar) ~ “L” (Dec)
d: Decade of the month: “1” (First), “2” (Middle), “3” (Last)
e: Day in d above: “A” (1st), “B” (2nd), “C” (3rd) ~ “J” (9th), “K” (10th)
“L” denotes the 31st of the month
“I” is not used to denote a day in this date system
14
2009-07-30
TL(RMH,SH,OH,YH,GH,FGH)1050(T20)
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
15
2009-07-30
相关型号:
TLOH1100B(T11)
Visible LED, SINGLE COLOR LED, ORANGE, 2.4 mm, 3.20 X 2.80 MM, 1.90 MM HEIGHT, ROHS COMPLIANT, PLASTIC, 4-3R1, 2 PIN
TOSHIBA
TLOH1100B(TA-T11)
Visible LED, SINGLE COLOR LED, ORANGE, 2.4 mm, 3.20 X 2.80 MM, 1.90 MM HEIGHT, ROHS COMPLIANT, PLASTIC, 4-3R1, 2 PIN
TOSHIBA
TLOH1100B(UA-T11)
Visible LED, SINGLE COLOR LED, ORANGE, 2.4 mm, 3.20 X 2.80 MM, 1.90 MM HEIGHT, ROHS COMPLIANT, PLASTIC, 4-3R1, 2 PIN
TOSHIBA
©2020 ICPDF网 联系我们和版权申明