TLP161G(IFT5) [TOSHIBA]
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT WITH ZERO CRSVR OPTOCOUPLER, 11-4C3, MINIFLAT-4/6;
| 型号： | TLP161G(IFT5) |
| 厂家： | 
TOSHIBA |
| 描述： | Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT WITH ZERO CRSVR OPTOCOUPLER, 11-4C3, MINIFLAT-4/6 三端双向交流开关 输出元件 |
| 文件： | 总6页 (文件大小：309K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLP161G
TOSHIBA Photocoupler GaAs Ired & Photo−Triac
TLP161G
Triac Drive
Programmable Controllers
AC−Output Module
Solid State Relay
Unit: mm
The TOSHIBA mini flat coupler TLP161G is a small outline coupler,
suitable for surface mount assembly.
The TLP161G consists of a photo triac, optically coupled to a gallium
arsenide infrared emitting diode.
•
•
•
•
•
•
•
Zero−voltage crossing turn−on
Peak off−state voltage: 400 V (min)
Trigger LED current: 10 mA (max)
On−state current: 70 mA (max)
Isolation voltage: 2500 Vrms (min)
UL approved: UL1577, File No.E67349
cUL approved :CSA Component Acceptance Service
No. 5A, File No.E67349
•
Option (V4) VDE approved : DIN EN60747-5-5 (Note1)
(Note 1) : When a EN60747-5-5 approved type is needed, please designate
“Option(V4)”
TOSHIBA
11−4C3
Weight: 0.09 g (typ.)
Trigger LED Current
Trigger LED Current (mA)
Marking of
Classification*
V =3V, Ta=25°C
T
Classification
Min
Max
5
(IFT5)
(IFT7)
―
―
―
T5
7
T5, T7
Standard
10
T5, T7, blank
*Ex. (IFT5); TLP161G(IFT5)
(Note) Application type name for certification test, please
use standard product type name, i.e.
TLP161G(IFT5): TLP161G
Pin Configurations
1
6
4
3
ZC
1. ANODE
3. CATHODE
4. TERMINAL 1
6. TERMINAL 2
Start of commercial production
1988-04
1
2017-07-10
TLP161G
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Forward current
I
50
mA
F
Forward current derating (Ta ≥ 53°C)
Peak forward current (100μs pulse, 100pps)
Reverse voltage
ΔI / °C
−0.7
mA / °C
F
I
1
A
V
FP
V
5
R
PD
100
-1.4
mW
mW/°C
Diode power dissipation
△PD /°C
Diode power dissipation derating (Ta ≥ 53°C)
Junction temperature
T
j
125
400
70
°C
V
Off−state output terminal voltage
V
DRM
Ta=25°C
On−state RMS current
Ta=70°C
I
mA
T(RMS)
40
On−state current derating (Ta ≥ 25°C)
Peak on−state current (100μs pulse, 120pps)
Peak nonrepetitive surge current
ΔI / °C
−0.67
2
mA / °C
A
T
I
TP
I
1.2
A
TSM
PO
(P =10ms)
W
Output power dissipation
200
−2.0
mW
mW / °C
°C
Output power dissipation derating (Ta ≥ 25°C)
Junction temperature
ΔPO / °C
T
j
115
Storage temperature range
T
−55 to 125
−40 to 100
260
°C
stg
opr
Operating temperature range
T
°C
Lead soldering temperature (10s)
Isolation voltage (AC, 1minute, R.H. ≤ 60%)
T
°C
sol
(Note)
BV
2500
Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc.).
(Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together.
Recommended Operating Conditions
Characteristic
Symbol
Min
Typ.
Max
Unit
Supply voltage
Forward current
V
―
15
―
20
―
―
120
25
1
Vac
mA
A
AC
I
F
Peak on−state current
I
―
TP
Operating temperature
T
opr
−25
85
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2017-07-10
TLP161G
Individual Electrical Characteristics (Ta = 25°C)
Characteristic
Forward voltage
Symbol
Test Condition
Min
Typ.
Max
Unit
V
I
= 10mA
1.0
―
―
―
―
―
1.15
―
1.3
10
V
μA
pF
nA
V
F
F
Reverse current
I
R
V = 5V
R
Capacitance
C
T
VF = 0 V, f = 1MHz
= 400V
30
―
Peak off−state current
Peak on−state voltage
Holding current
I
V
10
1000
2.8
―
DRM
DRM
= 70 mA
TM
V
I
1.7
0.6
TM
I
H
―
mA
Critical rate of rise of
off−state voltage
dv / dt
V
V
= 120Vrms, Ta = 85°C (Fig.1) 200
500
0.2
―
―
V / μs
V / μs
in
in
Critical rate of rise of
commutating voltage
dv / dt(c)
= 30Vrms, I = 15mA
(Fig.1)
―
T
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic
Trigger LED current
Symbol
Test Condition
Min
Typ.
Max
Unit
I
V
= 3V
T
―
―
5
10
40
mA
V
FT
Inhibit voltage
V
I
I
= rated I
= rated I
―
IH
F
FT
FT
F
Leakage in inhibited state
I
―
―
100
0.8
300
μA
IH
V
V
V
= rated V
T
S
S
DRM
Capacitance (input to output)
Isolation resistance
C
R
= 0 V, f = 1MHz
―
―
―
―
―
pF
S
12
14
= 500 V, R.H.≤ 60%
1×10
2500
―
10
Ω
S
AC, 1 minute
―
Vrms
Vdc
Isolation voltage
BV
AC, 1 second, in oil
DC, 1 minute, in oil
5000
5000
S
―
Fig.1
dv / dt test circuit
R
in
V
in
5V，VCC
+
1
3
6
4
V
CC
120Ω
0V
～
−
R
L
dv / dt (c)
dv / dt
2k Ω
3
2017-07-10
TLP161G
I
– Ta
I
– Ta
F
T(RMS)
60
50
40
30
20
120
100
80
60
40
10
0
20
0
120
40
80
100
−20
0
20
40
60
80
100
120
−20
0
20
60
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
I
– V
I
– D
R
F
F
FP
100
3000
1000
Pulse width ≤ 100 μs
Ta = 25°C
50
30
Ta = 25°C
500
300
10
5
3
100
1
50
30
0.5
0.3
10
3
0.1
0.6
10−3
10−2
10−1
100
0.8
1.0
1.2
1.4
1.6
1.8
Duty cycle ratio
D
Forward voltage
V
(V)
R
F
∆V / ∆Ta – I
F
F
I
– V
FP
FP
−3.2
1000
−2.8
500
300
−2.4
−2.0
−1.6
−1.2
100
50
30
10
Pulse width ≤ 10 μs
Repetitive frequency
= 100 Hz
5
3
−0.8
−0.4
Ta = 25°C
0.1
0.3
1
3
10
30 50
1
0.6
1.0
1.4
2.2
2.6
3.0
1.8
Forward current I
(mA)
F
Pulse forward voltage
V
(V)
FP
4
2017-07-10
TLP161G
Normalized I – T
Normalized I – T
FT
H
a
a
3
2
3
2
V
= 3V
T
1.2
1
1.2
1
0.5
0.3
0.5
0.3
0.1
0.1
−40
−20
0
20
40
60
80
100
100
100
20
60
80
−40
−20
0
40
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
Normalized V
– T
a
Normalized I
– T
a
DRM
DRM
103
1.4
V
= Rated
DRM
1.2
1.0
0.8
0.6
0.4
0.2
102
101
100
−40
−20
0
20
40
60
80
100
0
20
40
60
80
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
Normalized V – T
IH
Normalized I – T
IH
a
a
3
2
3
2
1.2
1
1.2
1
0.5
0.3
0.5
0.3
I
= Rated I
60
F
FT
I
= Rated I
FT
F
V
= Rated V
T
DRM
0.1
−40
0.1
−40
−20
0
20
40
80
20
60
80
−20
0
40
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
5
2017-07-10
TLP161G
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.
Hardware, software and systems described in this document are collectively referred to as “Product”.
•
•
TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
•
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,
or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all
relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for
Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for
the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product
design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or
applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,
programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for
such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.
Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export
laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export
Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in
compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
6
2017-07-10
相关型号：
TLP161G(IFT7)
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT WITH ZERO CRSVR OPTOCOUPLER, 11-4C3, MINIFLAT-4/6
TOSHIBA
TLP161G(R)
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT WITH ZERO CRSVR OPTOCOUPLER, SO-5
TOSHIBA
TLP161J(F)
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT WITH ZERO CRSVR OPTOCOUPLER, LEAD FREE, MINIFLAT, 11-4C3, 6/4
TOSHIBA
TLP161J(IFT7)
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT WITH ZERO CRSVR OPTOCOUPLER, 11-4C3, MINIFLAT-4/6
TOSHIBA
©2020 ICPDF网 联系我们和版权申明