TLP209D [TOSHIBA]
PHOTO RELAY; PHOTO继电器
| 型号： | TLP209D |
| 厂家： | 
TOSHIBA |
| 描述： | PHOTO RELAY |
| 文件： | 总4页 (文件大小：130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLP209D
TOSHIBA PHOTOCOUPLER PHOTO RELAY
TLP209D
MEASUREMENT INSTRUMENTS
LOGIC IC TESTERS / MEMORY TESTERS
BOARD TESTERS / SCANNERS
Unit: mm
The TOSHIBA TLP209D consist of a gallium arsenide infrared emitting
diode optically coupled to a photo-MOS FET in a plastic SOP package.
Its characteristics include low OFF-state current and low output pin
capacitance, enabling it to be used in high-frequency measurement
instruments.
Features
•
•
•
•
•
•
•
•
8 pin SOP (2.54SOP8)
2-Form-A
: 2.1 mm high, 2.54 mm pitch
Peak Off-State Voltage
Trigger LED Current
On-State Current
On-State Resistance
Output Capacitance
Isolation Voltage
: 200 V (min)
: 3 mA (max)
: 50 mA (max)
: 50 ohm (max)
: 20 pF (max)
: 1500 Vrms (min)
JEDEC
EIAJ
TOSHIBA
Weight: 0.2 g
11−10H1
Pin Configuration (top view)
Schematic
1, 3 : ANODE
2, 4 : CATHODE
1
8
1
2
3
4
8
7
6
5
5
6
7
8
: DRAIN D1
: DRAIN D2
: DRAIN D3
: DRAIN D4
2
3
7
6
4
5
1
2007-10-01
TLP209D
Absolute Maximum Ratings (Ta = 25°C)
CHARACTERISTIC
Forward Current
SYMBOL
RATING
UNIT
I
F
50
−0.5
5
mA
mA/°C
V
>
Forward Current Derating (Ta 25°C)
ΔI /°C
F
=
Reverse Voltage
V
R
Junction Temperature
Off-State Output Terminal Voltage
On-State Current
T
125
°C
j
V
200
V
OFF
I
50
mA
mA/°C
°C
ON
>
On-State Current Derating (Ta 25°C)
ΔI /°C
ON
−0.5
125
=
Junction Temperature
Storage Temperature Range
Operating Temperature Range
Lead Soldering Temperature (10 s)
T
j
T
−55~125
−40~85
260
°C
stg
opr
T
°C
T
°C
sol
<
Isolation Voltage (AC, 1 minute, R.H. 60%) (NOTE1)
BV
1500
Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(NOTE1) : Device considered a two-terminal device : LED side pins shorted together, and DETECTOR side pins
shorted together.
Recommended Operating Conditions
CHARACTERISTIC
Supply Voltage
SYMBOL
MIN.
TYP.
MAX.
UNIT
V
⎯
5
⎯
7.5
⎯
160
15
V
DD
Forward Current
I
F
mA
mA
°C
On-State Current
I
⎯
50
ON
Operating Temperature
T
opr
−20
⎯
60
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Individual Electrical Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CONDITION
= 10 mA
F
Min
Typ.
Max
UNIT
Forward Voltage
Reverse Current
Capacitance
V
I
1.0
⎯
1.15
⎯
1.3
10
⎯
V
F
I
V
= 5 V
R
μA
pF
R
C
V = 0, f = 1 MHz
= 160 V
⎯
30
T
Off-State Current
Capacitance
I
V
⎯
⎯
⎯
1
nA
pF
OFF
OFF
C
V = 0, f = 1 MHz
15
20
OFF
2
2007-10-01
TLP209D
Coupled Electrical Characteristics (Ta = 25°C)
CHARACTERISTIC
Trigger LED Current
SYMBOL
TEST CONDITION
= 50 mA
Min
Typ.
Max
UNIT
I
I
I
I
⎯
0.1
⎯
1
3
mA
mA
Ω
FT
ON
Return LED Current
On-State Resistance
I
= 100 μA
⎯
40
⎯
50
FC
OFF
R
= 50 mA, I = 5 mA
ON
ON
F
Isolation Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CONDITION
Min
Typ.
0.8
Max
UNIT
Capacitance Input to Output
Isolation Resistance
C
R
V
V
= 0 V, f = 1 MHz
⎯
⎯
⎯
⎯
⎯
⎯
pF
S
S
S
S
10
14
<
= 500 V, R.H. 60%
5 × 10
10
Ω
AC, 1 minute
1500
⎯
⎯
Vrms
Vdc
Isolation Voltage
BV
S
AC, 1 second (in oil)
DC, 1 minute (in oil)
3000
3000
⎯
Switching Characteristics (Ta = 25°C)
CHARACTERISTIC
SYMBOL
TEST CONDITION
= 200 Ω (NOTE 2)
Min
Typ.
Max
UNIT
ms
Turn-on Time
Turn-off Time
t
⎯
⎯
0.03
0.07
0.5
0.2
ON
R
V
L
= 10 V, I = 5 mA
F
DD
t
OFF
(NOTE 2) : SWITCHING TIME TEST CIRCUIT
I
F
V
DD
R
1, 3
6, 8
L
I
F
V
OUT
V
OUT
2, 4
5, 7
90%
10%
t
t
OFF
ON
3
2007-10-01
TLP209D
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
4
2007-10-01
相关型号：
©2020 ICPDF网 联系我们和版权申明