TLP3125 [TOSHIBA]
Replacement for Mechanical-Relay Measurement Instrumentation; 替代机械式继电器测量仪器![TLP3125](http://pdffile.icpdf.com/pdf2/p00201/img/icpdf/TLP312_1133560_icpdf.jpg)
型号: | TLP3125 |
厂家: | ![]() |
描述: | Replacement for Mechanical-Relay Measurement Instrumentation |
文件: | 总6页 (文件大小:194K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
TLP3125
TOSHIBA Photocoupler PHOTORELAY
TLP3125
Replacement for Mechanical-Relay
Measurement Instrumentation
Unit: mm
The TOSHIBA TLP3125 consists of a gallium arsenide infrared-emitting
diode optically coupled to a photo-MOSFET in a SOP, which is suitable for
surface mount assembly.
Features
•
•
•
•
•
•
•
8-pin SOP (2.54SOP8): 2.1-mm high, 2.54-mm pitch
1-Form-A
Peak off-state voltage: 400 V (Min.)
Trigger LED current: 3 mA (Max.)
On-state current: 200 mA (Max.)
On-state resistance: 4 Ω (Max.)
Isolation voltage: 1500 Vrms (Min.)
JEDEC
JEITA
⎯
⎯
TOSHIBA
11−10H1
Pin Configuration (top view)
Weight: 0.2 g (Typ.)
1 : NC
1
2
8
7
2 : Anode
3 : Cathode
4 : NC
5 : Drain D1
6 : Source
7 : Source
8 : Drain D2
3
4
6
5
Schematic
8
7
6
5
2
3
1
2008-04-14
TLP3125
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Forward current
I
50
−0.5
1
mA
mA/°C
A
F
Forward current derating (Ta ≥ 25°C)
Peak forward current (100 μs pulse, 100 pps)
Reverse voltage
ΔI /°C
F
I
FP
V
5
V
R
Junction temperature
T
125
°C
j
Off-state output terminal voltage
On-state current
V
400
V
OFF
I
200
mA
mA/°C
°C
ON
On-state current derating (Ta ≥ 25°C)
Junction temperature
ΔI /°C
ON
−2
T
125
j
Storage temperature range
T
−55 to 125
−40 to 85
260
°C
stg
opr
Operating temperature range
Lead soldering temperature (10 s)
Isolation voltage (AC, 1 minute, R.H. ≤ 60%) (Note 1)
T
°C
T
°C
sol
BV
1500
Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Device considered a two-terminal device : LED side pins shorted together, and detector side pins
shorted together.
Recommended Operating Conditions
Characteristic
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
Forward current
V
⎯
5
⎯
7.5
⎯
320
25
V
DD
I
mA
°C
F
Operating temperature
T
opr
−20
65
Recommended operating conditions are given as a design guideline to obtain expected
performance of the device. Additionally, each item is an independent guideline
respectively. In developing designs using this product, please confirm specified
characteristics shown in this document.
Individual Electrical Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
= 10 mA
F
Min.
Typ.
Max.
Unit
Forward voltage
Reverse current
Capacitance
V
I
1.0
⎯
1.15
⎯
1.3
2
V
F
I
V
= 5 V
R
μA
pF
R
C
V = 0, f = 1 MHz
= 400 V, Ta = 60°C
⎯
30
⎯
T
Off-state current
Capacitance
I
V
⎯
⎯
60
100
500
nA
pF
OFF
OFF
C
V = 0, f = 1 MHz
410
OFF
2
2008-04-14
TLP3125
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic
Trigger LED current
Symbol
Test Condition
= 200 mA
Min.
Typ.
Max.
Unit
I
I
I
I
⎯
0.1
⎯
1
3
⎯
4
mA
mA
Ω
FT
ON
Return LED current
On-state resistance
I
= 100 μA
⎯
FC
OFF
R
= 200 mA, I = 5 mA
3.4
ON
ON
F
Isolation Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min.
Typ.
0.8
Max.
Unit
Capacitance input to output
Isolation resistance
C
R
V
V
= 0 V, f = 1 MHz
⎯
⎯
⎯
⎯
⎯
⎯
pF
S
S
S
S
10
14
= 500 V, R.H. ≤ 60%
5 × 10
10
Ω
AC, 1 minute
1500
⎯
⎯
Vrms
Vdc
Isolation voltage
BV
S
AC, 1 second (in oil)
DC, 1 minute (in oil)
3000
3000
⎯
Switching Characteristics (Ta = 25°C)
Characteristic
Symbol
Test Condition
Min.
Typ.
Max.
Unit
ms
Turn-on time
Turn-off time
t
⎯
⎯
0.6
0.2
2
1
ON
R
= 200 Ω
(Note 2)
L
V
= 20 V, I = 5mA
F
DD
t
OFF
(Note 2) : switching time test circuit
I
F
V
DD
2
3
8
5
R
L
I
F
V
OUT
V
OUT
90%
10%
t
t
OFF
ON
3
2008-04-14
TLP3125
I
─ Ta
I
─ Ta
ON
F
100
80
60
40
20
0
300
250
200
150
100
50
0
-20
0
20
40
60
80
100
120
-20
0
20
40
60
80
100
120
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
I
─ V
I
─ V
ON
F
F
ON
100
300
200
100
0
℃
Ta = 25
F
Ta = 25 °C
50
30
I = 5 mA
10
5
3
-100
-200
-300
1
0.5
0.3
0.1
-0.8 -0.6 -0.4 -0.2
0
0.2
0.4
(V)
0.6
0.8
0.6
0.8
1
1.2
1.4
(V)
1.6
1.8
Forward voltage
V
F
On-state voltage V
ON
R
ON
─ Ta
I
─ Ta
FT
10
8
5
4
3
2
1
I
I
= 200 mA
= 5 mA
ON
F
I
= 200 mA
ON
t < 1 s
t < 1 s
6
4
2
0
0
-20
0
20
40
60
80
100
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
4
2008-04-14
TLP3125
t
,t
ON OFF
─ I
t
,t ─ Ta
ON OFF
F
10000
1000
100
10000
1000
100
Ta = 25 ℃
= 20 V, R = 200
V
=20V,R =200Ω
L
DD
I =5mA
Ω
V
DD
L
F
t
ON
t
OFF
t
OFF
t
ON
10
-40 -20
0
20 40 60 80 100
10
0
10
20
30
40
50
Input current
I
(mA)
Ambient temperature Ta (°C)
F
I
─ Ta
OFF
1000
100
10
V
OFF
= 400 V
1
-20
0
20
40
60
80
100
Ambient temperature Ta (°C)
5
2008-04-14
TLP3125
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2008-04-14
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00287/img/page/TLP3127_1742831_files/TLP3127_1742831_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00287/img/page/TLP3127_1742831_files/TLP3127_1742831_2.jpg)
TLP3127
Photorelays (MOSFET Output Devices), Optical Semiconductor Devices - Photocouplers and Photorelays
TOSHIBA
©2020 ICPDF网 联系我们和版权申明