TLP3375 [TOSHIBA]
Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 500 V ISOLATION-MAX, 11-2C1S, USOP-4;
| 型号： | TLP3375 |
| 厂家： | 
TOSHIBA |
| 描述： | Solid State Relay, TRANSISTOR OUTPUT SOLID STATE RELAY, 500 V ISOLATION-MAX, 11-2C1S, USOP-4 分离技术 隔离技术 输出元件 光电 |
| 文件： | 总8页 (文件大小：180K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLP3375
Photocouplers Photorelay
TLP3375
1. Applications
•
•
•
•
High-Speed Memory Testers
High-Speed Logic IC Testers
Radio-Frequency Measuring Instruments
ATE (Automatic Test Equipment)
2. General
The TLP3375 photorelay consists of a photo MOSFET optically coupled to an infrared light emitting diode. It is
housedina4-pinUSOPpackage.TheTLP3375isdesignedtoexhibitafastrisetimeandreducesignaldegradation.
It is primarily suitable as a replacement for a mechanical relay to be used as a switching device in high-speed
testers.
3. Features
(1) Normally off (1-Form-A)
(2) OFF-state output terminal voltage: 50 V (min)
(3) Trigger LED current: 3 mA (max)
(4) ON-state current: 300 mA (max)
(5) ON-state resistance: 1.0 Ω (typ.), 1.5 Ω (max)
(6) OFF-state Capacitance: 12 pF (typ.)
(7) Isolation voltage: 500 Vrms (min)
(8) ERT(Equivalent Rise Time): 40 ps (typ.), 90 ps (max)
(9) Safety standards
UL-approved: UL1577 File No.E67349
4. Packaging and Pin Configuration
1: Anode
2: Cathode
3: Drain
4: Drain
11-2C1S
2012-03-28
Rev.2.0
1
TLP3375
5. Internal Circuit
Fig. 5.1 Internal Circuit
6. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25)
Characteristics
Symbol
Note
Rating
Unit
LED
Input forward current
IF
∆IF/∆Ta
VR
50
-0.5
5
mA
mA/
V
Input forward current derating
Input reverse voltage
(Ta ≥ 25)
Input power dissipation
Junction temperature
PD
50
mW
Tj
125
50
Detector OFF-state output terminal voltage
ON-state current
VOFF
ION
V
300
-3.0
mA
ON-state current derating
(Ta ≥ 25)
∆ION/∆Ta
mA/
ON-state current (pulsed)
Output power dissipation
Junction temperature
(t = 100 ms, Duty = 1/10)
IONP
PO
900
200
mA
mW
Tj
125
Common Storage temperature
Operating temperature
Tstg
Topr
Tsol
BVS
-40 to 125
-40 to 85
260
Lead soldering temperature
Isolation voltage
(10 s)
AC, 1 min, R.H. ≤ 60%
(Note 1)
500
Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are
shorted together.
Caution:This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against
by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on.
7. Recommended Operating Conditions (Note)
Characteristics
Symbol Note
Min
Typ.
Max
Unit
Supply voltage
VDD
IF
5
7.5
40
20
V
Input forward current
ON-state current
mA
ION
Topr
-20
300
65
Operating temperature
Note: The recommended operating conditions are given as a design guide necessary to obtain the intended
performance of the device. Each parameter is an independent value. When creating a system design using
this device, the electrical characteristics specified in this datasheet should also be considered.
2012-03-28
Rev.2.0
2
TLP3375
8. Electrical Characteristics (Unless otherwise specified, Ta = 25)
Characteristics
Symbol
Note
Test Condition
IF = 10 mA
Min
Typ.
Max
Unit
LED
Input forward voltage
Input reverse current
Input capacitance
VF
IR
1.0
1.15
1.3
10
1
V
VR = 5 V
µA
pF
nA
pF
Ct
V = 0 V, f = 1 MHz
VOFF = 50 V
15
Detector OFF-state current
Output capacitance
IOFF
COFF
V = 0 V, f = 100 MHz, t < 1s
12
9. Coupled Electrical Characteristics (Unless otherwise specified, Ta = 25)
Characteristics
Trigger LED current
Symbol
Note
Test Condition
ION = 100 mA
Min
Typ.
Max
Unit
IFT
IFC
0.2
0.5
3
mA
mA
Ω
Return LED current
ON-state resistance
IOFF = 10 µA
RON
ION = 300 mA, IF = 5 mA, t < 1 s
1.0
1.5
10. Isolation Characteristics (Unless otherwise specified, Ta = 25)
Characteristics
Symbol
Note
Test Condition
Min
Typ.
Max
Unit
Total capacitance (input to output)
Isolation resistance
CS
RS
(Note 1) VS = 0 V, f = 1 MHz
(Note 1) VS = 500 V, R.H. ≤ 60%
AC, 1 min
5 × 1010
500
0.4
1014
pF
Ω
Isolation voltage
BVS
Vrms
AC, 1s in oil
1000
1000
DC, 1 min, in oil
Vdc
Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are
shorted together.
2012-03-28
Rev.2.0
3
TLP3375
11. Switching Characteristics (Unless otherwise specified, Ta = 25)
Characteristics
Turn-on time
Symbol
Note
Test Condition
See Fig. 11.1
Min
Typ
Max
Unit
tON
200
100
500
400
µs
RL = 200 Ω, VDD = 20 V, IF = 5 mA
Turn-off time
tOFF
Turn-on time
Turn-off time
tON
See Fig. 11.1
RL = 200 Ω, VDD = 20 V, IF = 10 mA
250
400
tOFF
Equivalent rise time
ERT
See Fig. 11.2
40
90
ps
IF = 5 mA, VDD = 0.25 V, tr(in) = 25 ps
Fig. 11.1 Switching Time Test Circuit
Fig. 11.2 ERT (Equivalent Rise Time)
2012-03-28
Rev.2.0
4
TLP3375
12. Characteristics Curves and Circuit Connections
12.1. Characteristics Curves (Note)
Fig. 12.1.1 IF - Ta
Fig. 12.1.2 ION - Ta
Fig. 12.1.4 ION - VON
Fig. 12.1.6 IFT - Ta
Fig. 12.1.3 IF - VF
Fig. 12.1.5 RON - Ta
2012-03-28
Rev.2.0
5
TLP3375
Fig. 12.1.7 tON, tOFF - IF
Fig. 12.1.8 tON, tOFF - Ta
Fig. 12.1.9 IOFF - Ta
Fig. 12.1.10 IOFF - VOFF
Fig. 12.1.11 COFF/COFF(0V) - VOFF
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
2012-03-28
Rev.2.0
6
TLP3375
Package Dimensions
Unit: mm
Weight: 0.03 g (typ.)
Package Name(s)
TOSHIBA: 11-2C1S
2012-03-28
Rev.2.0
7
TLP3375
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product
is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/
or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact
("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace
industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment,
equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and
equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.
Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange
and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology
are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
2012-03-28
Rev.2.0
8
相关型号：
TLP338
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, PLASTIC, DIP-6
TOSHIBA
©2020 ICPDF网 联系我们和版权申明