TLP715F(F)

更新时间:2024-09-18 18:07:38
品牌:TOSHIBA
描述:TRANSISTOR-STAGE-OUTPUT OPTOCOUPLER,1-CHANNEL,5KV ISOLATION,SO

TLP715F(F) 概述

TRANSISTOR-STAGE-OUTPUT OPTOCOUPLER,1-CHANNEL,5KV ISOLATION,SO 光耦合器

TLP715F(F) 规格参数

是否Rohs认证: 符合生命周期:Active
Reach Compliance Code:unknown风险等级:5.76
最大正向电流:0.01 A最大绝缘电压:5000 V
安装特点:SURFACE MOUNT元件数量:1
最高工作温度:100 °C最低工作温度:-40 °C
标称响应时间:2.5e-7 ns子类别:Optocoupler - IC Outputs
标称供电电压:20 V表面贴装:YES
Base Number Matches:1

TLP715F(F) 数据手册

通过下载TLP715F(F)数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
TLP715F  
TOSHIBA PHOTOCOUPLER GaAAs IRED & PHOTO-IC  
TLP715F  
Isolated Bus Drivers  
Unit in mm  
High Speed Line Receivers  
4.58±0.25  
6 5 4  
Microprocessor System Interfaces  
The Toshiba TLP715F consists of a GaAAs light-emitting diode and an  
integrated high-gain, high-speed photodetector. This unit is a 6-pin SDIP. The  
TLP715F is 50% smaller than the 8-PIN DIP and meets the reinforced  
insulation class requirements of international safety standards. Therefore the  
mounting area can be reduced in equipment requiring safety standard  
certification.  
1
2 3  
7.62±0.25  
The detector has a totem pole output stage to provide both source and sink  
driving. The detector IC has an internal shield that provides a guaranteed  
common-mode transient immunity of 10 kV/μs.  
The TLP715F is buffer logic type. For inverter logic type, the TLP718F is in  
line-up.  
Absolute maximum ratings and electrical characteristics are the same as in  
the TLP715 technical data sheets.  
1.27±0.2  
0.4±0.1  
0.75±0.25  
11.7±0.3  
11-5J101  
TOSHIBA  
11-5J101  
z
z
z
z
z
z
z
z
Buffer logic output (totem pole output)  
Weight:0.26 g(typ.)  
Guaranteed performance over temperature : 40 to 100°C  
Power supply voltage : 4.5 to 20 V  
Input current: I  
FLH  
= 3mA (Max.)  
/ t : 250 ns (Max.)  
Switching time ( t  
pLH pHL)  
Pin Configuration (Top View)  
Common-mode transient immunity : ±10 kV/μs (Min)  
1:ANODE  
2:N.C.  
VCC  
1
2
6
5
4
Isolation voltage : 5000 Vrms (Min)  
UL recognized  
UL1577, File No.E67349  
3:CATHODE  
4:GND  
GND  
z
z
c-UL recognized  
CSA Component Acceptance Service No. 5A, File No.E67349  
5:Vo (Output)  
6:Vcc  
3
SHIELD  
Option (D4)  
TÜV recognized / VDE under application : DIN EN60747-5-5  
Maximum Operating Insulation Voltage : 1140Vpk  
Schematic  
I
CC  
V
CC  
Highest Permissible Over Voltage  
: 8000Vpk  
6
(Note) : When a EN60747-5-5 approved type is needed,  
Please designate “Option(D4)”  
I
F
Tr1  
Tr2  
1+  
VF  
3-  
I
O
z
Construction Mechanical Rating  
V
O
7.62 mm pitch  
standard type  
10.16 mm pitch  
TLPXXXF type  
5
Creepage Distance  
Clearance  
Insulation Thickness  
7.0 mm (Min)  
7.0 mm (Min)  
0.4 mm (Min)  
8.0 mm (Min)  
8.0 mm (Min)  
0.4 mm (Min)  
GND  
SHIELD  
4
Truth Table  
0.1 μF bypass capacitor must be  
connected between pins 6 and 4.  
Input  
H
LED  
ON  
Tr1  
Tr2  
Output  
ON OFF  
OFF ON  
H
L
OFF  
L
1
2012-12-19  
TLP715F  
RESTRICTIONS ON PRODUCT USE  
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information  
in this document, and related hardware, software and systems (collectively "Product") without notice.  
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with  
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.  
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are  
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and  
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily  
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the  
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of  
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes  
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the  
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their  
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such  
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,  
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating  
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR  
APPLICATIONS.  
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE  
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH  
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT  
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without  
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for  
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,  
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE  
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your  
TOSHIBA sales representative.  
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.  
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any  
applicable laws or regulations.  
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any  
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to  
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.  
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE  
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY  
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR  
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND  
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO  
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.  
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or  
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.  
Do not use or otherwise make available Product or related software or technology for any military purposes, including without  
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile  
technology products (mass destruction weapons). Product and related software and technology may be controlled under the  
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the  
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited  
except in compliance with all applicable export laws and regulations.  
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.  
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,  
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES  
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.  
2
2012-12-19  

TLP715F(F) 相关器件

型号 制造商 描述 价格 文档
TLP715F(TP) TOSHIBA TRANSISTOR-STAGE-OUTPUT OPTOCOUPLER,1-CHANNEL,5KV ISOLATION,SO 获取价格
TLP716 TOSHIBA TOSHIBA Photocoupler GaAlAs IRED & Photo- IC 获取价格
TLP716(D4) TOSHIBA Optocoupler - IC Output, 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 11-5J1, SDIP-6 获取价格
TLP716F TOSHIBA Plasma display panel High Speed Interface Factory Automation 获取价格
TLP716F(D4-TP,F) TOSHIBA Optocoupler Logic-Out Totem-Pole DC-IN 1-CH 6-Pin SDIP SMD T/R 获取价格
TLP716_07 TOSHIBA Plasma display panel High Speed Interface Factory Automation 获取价格
TLP718 TOSHIBA TOSHIBA PHOTOCOUPLER GaAAs IRED & PHOTO-IC 获取价格
TLP718(D4,F) TOSHIBA TRANSISTOR-STAGE-OUTPUT OPTOCOUPLER,1-CHANNEL,5KV ISOLATION,SO 获取价格
TLP718(F) TOSHIBA Logic Output Optocouplers P-coupler(photo-IC) Output 获取价格
TLP718(TP) TOSHIBA 暂无描述 获取价格

TLP715F(F) 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6