TLPGE125(N) [TOSHIBA]

Visible LED, T-1 SINGLE COLOR LED, HIGH INTENSITY PURE GREEN, 3 mm, PLASTIC, 4-4E1A, 2 PIN;


型号：	TLPGE125(N)
厂家：	TOSHIBA
描述：	Visible LED, T-1 SINGLE COLOR LED, HIGH INTENSITY PURE GREEN, 3 mm, PLASTIC, 4-4E1A, 2 PIN 光电
文件：	总4页 (文件大小：143K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TLPGE125

TOSHIBA LED Lamp InGaAℓP Pure Green Light Emission

TLPGE125

Panel Circuit Indicator

Unit in mm

3mm diameter(T1)

InGaAℓP pure green LED

All plastic mold type.

Colorless clear lens

Low drive current, high intensity pure green light emission

Recommended forward current: I = 15~20mA(DC)

All plastic molded lens, provides an excellent on-off contrast ratio.

Fast response time, capable of pulse operation.

High power luminous intensity

Applications: Suitable for outdoor message signboard, safety

equipment, etc.

Maximum Ratings (Ta = 25°C)

Characteristics

Symbol

Rating

Unit

JEDEC

―

Forward current (DC)

Reverse voltage

EIAJ

TOSHIBA

Weight: 0.14 g

4−4E1A

Power dissipation

140

°C

Operating temperature range

Storage temperature range

-30~85

-40~120

opr

°C

stg

2002-09-25

TLPGE125

Electrical And Optical Characteristics (Ta = 25°C)

Characteristics

Forward voltage

Symbol

Test Condition

Min

Typ.

Max

Unit

IF=20mA

V =4V

2.27

2.8

Reverse current

µA

Luminous intensity

I =20mA

(Note) 47.6

150

562

mcd

Peak emission wavelength

Spectral line half width

Dominant wavelength

I =20mA

∆λ

I =20mA

558

(Note):Lamps are classified into the following ranks according to their luminous intensity.

Measurement tolerance for each limit is ±15%.

M: 56-112mcd, N: 100-200mcd, P: 180-360mcd

Precaution

Please be careful of the followings

Soldering temperature: 260°C max Soldering time: 3s max

(Soldering portion of lead: Up to 2mm from the body of the device)

If the lead is formed, the lead should be formed up to 5mm from the body of the device without forming stress to

the resin. Soldering should be performed after lead forming.

This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure

that it will not be affected by this IR light.

2002-09-25

TLPGE125

– V

I – I

V F

100

1000

500

Ta = 25 °C

300

100

1.6

1.8

2.0

2.2

2.4

2.6

(V)

2.8

Forward voltage

Forward current

(mA)

Relative Luminous Intensity －

– T

Wavelength

1.0

0.8

= 20mA

Ta = 25 °C

0.6

0.4

0.2

0.5

0.3

0.1

520

540

560

580

600

(nm)

620

640

−20

Case temperature

(°C)

Wavelength

Radiation Pattern

I – Ta

Ta = 25 °C

0°

10°

20°

30°

40°

50°

60°

70°

80°

90°

60°

70°

80°

90°

0.2

0.4

0.8 1.0

100

0.6

Ambient temperature Ta (°C)

2002-09-25

TLPGE125

RESTRICTIONS ON PRODUCT USE

000707EAC

· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor

devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical

stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of

safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of

such TOSHIBA products could cause loss of human life, bodily injury or damage to property.

In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as

set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and

conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability

Handbook” etc..

· The TOSHIBA products listed in this document are intended for usage in general electronics applications

(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,

etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires

extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or

bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or

spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,

medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this

document shall be made at the customer’s own risk.

· Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes

are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the

products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with

domestic garbage.

· The information contained herein is presented only as a guide for the applications of our products. No

responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other

rights of the third parties which may result from its use. No license is granted by implication or otherwise under

any intellectual property or other rights of TOSHIBA CORPORATION or others.

· The information contained herein is subject to change without notice.

2002-09-25

TLPGE125(N) [TOSHIBA]

相关型号：

TLPGE158P

TLPGE158P(F)

TLPGE158P(N)

TLPGE158P(P)

TLPGE158P(Q)

TLPGE158PQ

TLPGE159P

TLPGE159P(F)

TLPGE159P(Q)

TLPGE159P(R)

TLPGE159PP

TLPGE159PPQ