TLRH27T(Q,F) [TOSHIBA]
Visible LED, SINGLE COLOR LED, RED, 5.8 mm, 4-5AP1, 2 PIN;
| 型号： | TLRH27T(Q,F) |
| 厂家： | 
TOSHIBA |
| 描述： | Visible LED, SINGLE COLOR LED, RED, 5.8 mm, 4-5AP1, 2 PIN 光电 |
| 文件： | 总5页 (文件大小：220K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLRH27T(F),TLYH27T(F)
TOSHIBA InGaAℓP LED
TLRH27T(F),TLYH27T(F)
Panel Circuit Indicator
Unit: mm
•
•
•
•
•
InGaAℓP technology
Elliptical transparent lens
Wide viewing angle
High optical output power at low currents
Applications: Message boards, full-color panels, backlighting
Color and Material
Part Number
Color
Material
TLRH27T(F)
TLYH27T(F)
Red
InGaAℓP
Yellow
Absolute Maximum Ratings (Ta = 25°C)
JEDEC
―
―
JEITA
TOSHIBA
4-5AP1
Weight: 0.3 g (typ.)
Operating
Storage
Forward Current
Reverse Voltage
(V)
Power Dissipation
(mW)
Temperature
(°C)
Temperature
(°C)
Part Number
I
(mA) (Note 1)
V
P
D
F
R
T
opr
T
stg
TLRH27T(F)
TLYH27T(F)
50
4
120
−40 to 100
−40 to 120
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
I
– Ta
F
Note 1: Forward current derating
80
60
40
20
0
0
20
40
60
80
100
120
Ambient temperature Ta (°C)
1
2008-09-26
TLRH27T(F),TLYH27T(F)
Electrical and Optical Characteristics (Ta = 25°C)
Reverse
Current
Typ. Emission Wavelength
(Note 2)
Luminous Intensity
(Note 2)
Forward Voltage
I
V
V
F
Part Number
I
R
λd
λP
Δλ
13
13
I
Min
153
272
Typ.
450
900
I
Min
1.7
1.7
Typ.
1.9
2.0
V
Max
2.4
I
Max
50
V
R
F
F
F
TLRH27T(F)
TLYH27T(F)
Unit
630
587
644
590
nm
20
20
20
20
20
20
4
2.4
50
4
mA
mcd
mA
mA
μA
V
Note 2 : LED lamps are classified into the following ranks according to their luminous intensity, and packed in boxes by
each rank.
TLRH27T(F):
Iv rank P: 153 － 414 mcd, Q : 272 － 736 mcd,
R : 476 mcd －
TLYH27T(F):
Iv rank Q: 272 － 736 mcd, R : 476 － 1290 mcd, S : 850 mcd －
λd rank 1: 581 － 588 nm, 2 : 585 － 592 nm, 3 : 589 － 595 nm
Precautions
Please be careful of the followings
Soldering temperature: 260°C max
•
Soldering time: 3 seconds max
(Soldering portion of lead: below the lead stopper of the device )
•
•
If the lead is formed, the lead should be formed up to below the lead stopper of the device without forming stress
to the resin. Soldering should be performed after lead forming.
This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure
that it will not be affected by this IR light.
2
2008-09-26
TLRH27T(F),TLYH27T(F)
TLRH27T(F)
I
– V
F
F
I
– I
F
V
10000
100
Ta = 25°C
Ta = 25°C
5000
3000
50
30
1000
10
500
300
5
3
100
50
30
1
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30
(mA)
50
100
Forward voltage
V
F
(V)
Forward current
I
F
Relative Luminous Intensity –
Wavelength
I
– Tc
V
10
1.0
0.8
I
= 20mA
F
Ta = 25°C
5
3
0.6
0.4
1
0.5
0.3
0.2
0
0.1
− 20
0
20
40
60
80
580
600
620
640
660
680
700
Case temperature Tc (°C)
Wavelength λ (nm)
Radiation Pattern
Ta = 25 °C
V
H
V
H
0°
10°
10°
20°
20°
30°
30°
40°
40°
50°
60°
50°
60°
70°
70°
80°
80°
90°
90°
1.0
0
0.2
0.4 0.6
0.8
3
2008-09-26
TLRH27T(F),TLYH27T(F)
TLYH27T(F)
I
– V
F
F
I
– I
F
V
100
5000
3000
Ta = 25°C
Ta = 25°C
50
30
1000
500
300
10
5
3
100
50
30
20
1
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
1
3
5
10
30 50 100
300 500 1000
Forward voltage
V
F
(V)
Forward current
I
F
(mA)
I
– Tc
Relative Luminous Intensity –
Wavelength
V
10
1.0
0.8
0.6
0.4
0.2
0
I
= 20mA
F
Ta = 25°C
5
3
1
0.5
0.3
0.1
− 20
0
20
40
60
80
640
660
600
620
540
560
580
Wavelength
λ
(nm)
Case temperature Tc (°C)
Radiation Pattern
T
= 25 °C
a
V
H
V
H
0°
10°
10°
20°
20°
30°
30°
40°
40°
50°
50°
60°
70°
80°
90°
60°
70°
80°
90°
1.0
0
0.2
0.4 0.6
0.8
4
2008-09-26
TLRH27T(F),TLYH27T(F)
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2008-09-26
相关型号：
©2020 ICPDF网 联系我们和版权申明