TPCP8207 [TOSHIBA]
TRANSISTOR SMALL SIGNAL, FET, FET General Purpose Small Signal;
| 型号： | TPCP8207 |
| 厂家： | 
TOSHIBA |
| 描述： | TRANSISTOR SMALL SIGNAL, FET, FET General Purpose Small Signal 开关 光电二极管 晶体管 |
| 文件： | 总10页 (文件大小：238K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TPCP8207
MOSFETs Silicon N-channel MOS (U-MOS)
TPCP8207
1. Applications
•
Motor Drivers
•
Mobile Equipment
2. Features
(1) Small footprint due to a small and thin package
(2) Small gate charge : QSW = 4.7 nC (typ.)
(3) Low drain-source on-resistance: RDS(ON) = 29.1 mΩ (typ.) (VGS = 10 V)
(4) Low leakage current: IDSS = 10 µA (max) (VDS = 40 V)
(5) Enhancement mode: Vth = 2 to 3 V (VDS = 10 V, ID = 0.5 mA)
3. Packaging and Internal Circuit
1: Source(1)
2: Gate(1)
7, 8: Drain(1)
3: Source(2)
4: Gate(2)
5, 6: Drain(2)
PS-8
2012-06-14
Rev.1.0
1
TPCP8207
4. Absolute Maximum Ratings (Note) (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Rating
Unit
V
Drain-source voltage
Gate-source voltage
Drain current (DC)
VDSS
VGSS
ID
40
±20
5
(Note 1)
(Note 1)
A
Drain current (pulsed)
IDP
20
Power dissipation (single operation)
(t = 5 s)
(t = 5 s)
(Note 2), (Note 4)
(Note 2), (Note 5)
PD(1)
PD(2)
1.77
1.47
W
Power dissipation (per device for dual
operation)
Power dissipation (single operation)
(t = 5 s)
(t = 5 s)
(Note 3), (Note 4)
(Note 3), (Note 5)
PD(1)
PD(2)
0.69
0.43
Power dissipation (per device for dual
operation)
Single-pulse avalanche energy
Avalanche current
(Note 6)
(Note 7)
EAS
IAR
26
5
mJ
A
Channel temperature
Storage temperature
Tch
Tstg
175
-55 to 150
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
5. Thermal Characteristics
Characteristics
Channel-to-ambient thermal resistance (single
Symbol
Max
84.4
Unit
(t = 5 s)
(t = 5 s)
(t = 5 s)
(t = 5 s)
(Note 2), (Note 4) Rth(ch-a)(1)
/W
operation)
Channel-to-ambient thermal resistance (per device for
dual operation)
(Note 2), (Note 5) Rth(ch-a)(2)
(Note 3), (Note 4) Rth(ch-a)(1)
(Note 3), (Note 5) Rth(ch-a)(2)
101.6
215.5
347.2
Channel-to-ambient thermal resistance (single
operation)
Channel-to-ambient thermal resistance (per device for
dual operation)
Note 1: Ensure that the channel temperature does not exceed 175.
Note 2: Device mounted on a glass-epoxy board (a), Figure 5.1
Note 3: Device mounted on a glass-epoxy board (b), Figure 5.2
Note 4: Power dissipation and thermal resistance values per device with the other device being off (During single
operation, power is supplied to only one of the two devices.)
Note 5: Power dissipation and thermal resistance values per device for dual operation (During dual operation, power
is evenly supplied to both devices.)
Note 6: VDD = 24 V, Tch = 25 (initial), L = 1.12 mH, RG = 25 Ω, IAR = 5 A
Note 7: Merely channel temperature is guaranteed 175.
Storage temperature range is guaranteed as usual (-55 to 150).
Fig. 5.1 Device Mounted on a Glass-Epoxy
Board (a)
Fig. 5.2 Device Mounted on a Glass-Epoxy
Board (b)
2012-06-14
Rev.1.0
2
TPCP8207
Note: This transistor is sensitive to electrostatic discharge and should be handled with care.
2012-06-14
Rev.1.0
3
TPCP8207
6. Electrical Characteristics
6.1. Static Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Gate leakage current
Symbol
Test Condition
Min
Typ.
Max
Unit
IGSS
IDSS
VGS = ±16 V, VDS = 0 V
40
20
2
±10
10
µA
Drain cut-off current
VDS = 40 V, VGS = 0 V
Drain-source breakdown voltage
V(BR)DSS ID = 10 mA, VGS = 0 V
V(BR)DSX ID = 10 mA, VGS = -20 V
V
Gate threshold voltage
Vth
VDS = 10 V, ID = 0.5 mA
VGS = 6 V, ID = 2.5 A
VGS = 10 V, ID = 2.5 A
2.5
39.3
29.1
3
Drain-source on-resistance
RDS(ON)
51
37.8
mΩ
6.2. Dynamic Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Input capacitance
Symbol
Test Condition
Min
Typ.
Max
Unit
pF
Ciss
Crss
Coss
tr
VDS = 10 V, VGS = 0 V, f = 1 MHz
505
66
Reverse transfer capacitance
Output capacitance
115
5.4
12
Switching time (rise time)
Switching time (turn-on time)
Switching time (fall time)
Switching time (turn-off time)
See Figure 6.2.1.
ns
ton
tf
4.5
18
toff
Fig. 6.2.1 Switching Time Test Circuit
6.3. Gate Charge Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Qg
Test Condition
Min
Typ.
11.8
Max
Unit
nC
Total gate charge (gate-source plus
gate-drain)
VDD ≈ 32 V, VGS = 10 V, ID = 5 A
Gate-source charge 1
Gate-drain charge
Gate switch charge
Qgs1
Qgd
2.1
3.9
4.7
QSW
6.4. Source-Drain Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Reverse drain current (pulsed)
Diode forward voltage
(Note 8)
IDRP
20
A
V
VDSF
IDR = 5 A, VGS = 0 V
-1.2
Note 8: Ensure that the channel temperature does not exceed 175.
2012-06-14
Rev.1.0
4
TPCP8207
7. Marking
Fig. 7.1 Marking
2012-06-14
Rev.1.0
5
TPCP8207
8. Characteristics Curves (Note)
Fig. 8.1 ID - VDS
Fig. 8.2 ID - VDS
Fig. 8.3 ID - VGS
Fig. 8.4 VDS - VGS
Fig. 8.5 RDS(ON) - ID
Fig. 8.6 RDS(ON) - Ta (Note 9)
2012-06-14
Rev.1.0
6
TPCP8207
Fig. 8.7 IDR - VDS
Fig. 8.8 Capacitance - VDS
Fig. 8.9 Vth - Ta (Note 9)
Fig. 8.10 Dynamic Input/Output Characteristics
Fig. 8.11 PD - Ta (Note 9)
(Guaranteed Maximum)
2012-06-14
Rev.1.0
7
TPCP8207
Fig. 8.12 rth - tw
(Guaranteed Maximum)
Fig. 8.13 Safe Operating Area
(Guaranteed Maximum)
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
Note 9: Although several performance curves are shown up to a Ta = 175, the device is not guaranteed at storage
temperatures up to 175. The storage temperature (Tstg) range is rated at -55 to 150.
2012-06-14
Rev.1.0
8
TPCP8207
Package Dimensions
Unit: mm
Weight: 0.017 g (typ.)
Package Name(s)
TOSHIBA: 2-3V1S
Nickname: PS-8
2012-06-14
Rev.1.0
9
TPCP8207
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDEDUSE").Exceptforspecificapplicationsasexpresslystatedinthisdocument, UnintendedUseincludes, withoutlimitation,
equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,
trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,
elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
2012-06-14
Rev.1.0
10
相关型号：
TPCP8303
Lithium Ion Battery Applications Notebook PC Applications Portable Equipment Applications
TOSHIBA
TPCP8401_07
TOSHIBA Field Effect Transistor Silicon P, N Channel MOS Type (U-MOS ゲ / ヰ-MOS サ)
TOSHIBA
TPCP8402
TOSHIBA Field Effect Transistor Silicon P, N Channel MOS Type (U-MOS IV / U-MOS III)
TOSHIBA
©2020 ICPDF网 联系我们和版权申明