TTA007(TE85L) [TOSHIBA]
TRANSISTOR,BJT,PNP,50V V(BR)CEO,1A I(C),SOT-23VAR;
| 型号： | TTA007(TE85L) |
| 厂家： | 
TOSHIBA |
| 描述： | TRANSISTOR,BJT,PNP,50V V(BR)CEO,1A I(C),SOT-23VAR |
| 文件： | 总5页 (文件大小：198K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TTA007
TOSHIBA Transistor Silicon PNP Epitaxial Type
TTA007
Unit: mm
High-Speed Switching Applications
DC-DC Converter Applications
•
•
•
High DC current gain : hFE = 200 to 500 (IC = −0.1 A)
Low collector-emitter saturation voltage : VCE(sat) = −0.2 V (max)
High-speed switching : tf = 70 ns (typ.)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Collector-base voltage
Symbol
Rating
Unit
V
CBO
V
CEO
V
EBO
−50
−50
V
V
V
Collector-emitter voltage
Emitter-base voltage
−7
DC
I
−1
C
1. BASE
Collector current
A
A
Pulse
I
−2
2. EMITTER
CP
3. COLLECTOR
Base current
I
−0.1
1.1
B
t = 10 s
DC
P
C
JEDEC
JEITA
－
－
Collector power dissipation
W
(Note 1)
0.7
Junction temperature
T
150
°C
°C
j
TOSHIBA
2-3S1C
Storage temperature range
T
−55 to150
stg
Weight: 0.01 g (typ.)
Note1: Mounted on FR4 board (glass epoxy; 645 mm2,1.6 mm thick;
Cu area: 645 mm2)
Note2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
1
2010-02-08
TTA007
Electrical Characteristics (Ta = 25℃)
Characteristic
Symbol
Test Condition
= −50 V, I = 0
Min
Typ.
Max
Unit
Collector cut-off current
I
V
V
―
―
―
―
―
―
―
―
―
8
−100
−100
―
nA
nA
V
CBO
CB
EB
E
Emitter cut-off current
I
= −7 V, I = 0
C
EBO
(BR) CEO
Collector-emitter breakdown voltage
V
I
= −10 mA, I = 0
−50
200
125
―
C
B
h
h
V
V
= −2 V, I = −0.1 A
500
―
FE (1)
FE (2)
CE
CE
C
DC current gain
－
= −2 V, I = −0.3 A
C
Collector-emitter saturation voltage
Base-emitter saturation voltage
Collector output capacitance
Rise time
V
I
I
= −0.3 A, I = −10 mA
−0.2
−1.1
―
V
V
CE (sat)
BE (sat)
C
C
B
V
= −0.3 A, I = −10 mA
―
B
C
V
= −10 V, I = 0, f = 1MHz
―
pF
ob
CB
E
t
―
60
280
70
―
See Figure 1
r
Switching time
V
I
= −30 V、R = 100 Ω
ns
Storage time
Fall time
t
―
―
CC
L
stg
= I = 10 mA
B2
t
f
―
―
B1
Marking
Part No. (or abbreviation code)
W H
0
Lot code (month)
Lot code (year)
Dot: even year
No Dot: odd year
Figure 1. Switching Time Test Circuit
2
2010-02-08
TTA007
I
– V
h
– I
FE C
C
CE
-1
10000
1000
100
-40
-100
-50
-30
-0.8
-0.6
-0.4
-0.2
-20
-15
Ta = 100°C
25°C
-10
−55°C
-5
-2
10
1
Common emitter
Ta = 25°C
Single pulse test
Common emitter
= -2 V
I
=−1mA
B
V
CE
Single pulse test
0
0
-0.2
-0.4
-0.6
-0.8
-1
-0.001
-0.01
-0.1
-1
Collector−emitter voltage
V
(V)
Collector current
I
(A)
CE
C
V
– I
V
– I
BE (sat) C
CE (sat)
C
-10
-10
-1
Ta = 100°C
25°C
-1
-55°C
-0.1
-0.01
Ta = 100°C
−55°C
25°C
Common emitter
/I = 30
Common emitter
I /I = 30
C B
I
C B
Single pulse test
Single pulse test
-0.1
-0.001
-0.001
-0.01
-0.1
-1
-0.001
-0.01
-0.1
-1
Collector current
I
(A)
Collector current
I
(A)
C
C
I
– V
BE
C
-1
Common emitter
= -2 V
V
CE
Single pulse test
-0.8
-0.6
-0.4
Ta = 100°C
−55°C
25°C
-0.2
0
0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
Base−emitter voltage
V
(V)
BE
3
2010-02-08
TTA007
r
－ t
w
th(j-a)
1000
100
10
Curves apply only to limited areas of thermal resistance.
Single nonrepetitive pulse Ta = 25°C
Mounted on an FR4 board
(glass-epoxy; 645 mm2,1.6 mm thick; Cu area, 645 mm2)
1
0.001
0.01
0.1
1
10
1000
100
Pulse width
t
(s)
w
Safe Operating Area
-10
I
max. (pulsed)*
C
1ms*
I
max. (continuous)
C
10 ms*
-1
100 ms*
10s*
-0.1
DC operation
Ta = 25°C
* Single nonrepetitive pulse
Ta = 25°C
0.01
・Mounted on an FR4 board
(glass-epoxy; 645 mm2,1.6 mm thick; Cu area, 645 mm2)
・Note that the curves for 100ms,10s and DC operation
will be different when the devices aren’t mounted on an
FR4 board.
・Curves must be derated linearly with increase in
temperature.
VCEO max
-0.001
-0.1
-1
-10
-100
Collector−emitter voltage
V
(V)
CE
4
2010-02-08
TTA007
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2010-02-08
相关型号：
©2020 ICPDF网 联系我们和版权申明