TEC2-2415 [TRACOPOWER]
DC/DC Converter;
| 型号： | TEC2-2415 |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converter |
| 文件： | 总4页 (文件大小：213K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converter
TEC 2 Series, 2 Watt
•
•
•
•
Compact SIP-8 package
I/O-isolation voltage 1‘600 VDC
Fully regulated outputs
Operating temperature range
–40°C to +95°C
TEC 2 is a new series with the design purpose to improve the prevalent 2 Watt SIP-8 DC/DC con-
verters in terms of cost, efficiency and performance. The latest technology and components en-
able an increase in efficiency by more than 20%. With the reduction of thermal loss, the operating
temperature range can be expanded from -40°C to +95°C. The converters are fully regulated over
0 - 100% load (no minimum load is required). The low input range is extended from 4.5 to 13.2 VDC
while models are also available with the standard 2:1 input ranges of 9-18, 18-36 and 36-75 VDC
(see TEC 2WI series for 4:1 input ranges). The functional I/O-isolation system is designed to meet
IEC/EN 62368-1 with a test voltage (60 s) of 1600 VDC.
•
•
•
•
Short circuit protection
Remote On/Off
3-year product warranty
Designed to meet
UL 62368-1 (UL 60950-1)
Models
Order code
TEC 2-0910
TEC 2-0911
TEC 2-0919
TEC 2-0912
TEC 2-0913
TEC 2-0915
TEC 2-0921
TEC 2-0922
TEC 2-0923
TEC 2-1210
TEC 2-1211
TEC 2-1219
TEC 2-1212
TEC 2-1213
TEC 2-1215
TEC 2-1221
Input voltage
Output voltage
Output current max.
Efficiency typ.
3.3 VDC
5.0 VDC
9.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
9.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
9.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
9.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
500 mA
400 mA
222 mA
167 mA
134 mA
83 mA
200 mA
83 mA
67 mA
500 mA
400 mA
222 mA
167 mA
134 mA
83 mA
200 mA
83 mA
67 mA
500 mA
400 mA
222 mA
167 mA
134 mA
83 mA
200 mA
83 mA
67 mA
500 mA
400 mA
222 mA
167 mA
134 mA
83 mA
200 mA
83 mA
67 mA
78 %
81 %
84 %
84 %
84 %
85 %
81 %
85 %
84 %
78 %
82 %
84 %
85 %
85 %
85 %
82 %
85 %
84 %
78 %
83 %
85 %
86 %
85 %
85 %
83 %
85 %
86 %
76 %
80 %
82 %
84 %
85 %
85 %
80 %
85 %
83 %
4.5 – 13.2 VDC
(9 VDC nominal)
9 – 18 VDC
(12 VDC nominal)
TEC 2-1222
TEC 2-1223
TEC 2-2410
TEC 2-2411
TEC 2-2419
TEC 2-2412
TEC 2-2413
TEC 2-2415
TEC 2-2421
TEC 2-2422
TEC 2-2423
TEC 2-4810
TEC 2-4811
TEC 2-4819
TEC 2-4812
TEC 2-4813
TEC 2-4815
TEC 2-4821
TEC 2-4822
TEC 2-4823
18 – 36 VDC
(24 VDC nominal)
36 – 75 VDC
(48 VDC nominal)
www.tracopower.com
Page 1 of 4
TEC 2 Series, 2 Watt
Input Specifications
Input current at no load
9 Vin models: 45 mA typ.
12 Vin models: 25 mA typ.
24 Vin models: 10 mA typ.
48 Vin models: 8 mA typ.
Surge voltage (1 s max.)
Start up voltage
9 Vin models: 15 V max.
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
9 Vin models: 4.5 V (or lower)
12 Vin models: 9 V (or lower)
24 Vin models: 18 V (or lower)
48 Vin models: 36 V (or lower)
Under voltage shut down
9 Vin models: 2 - 4 V
12 Vin models: 6 - 8 V
24 Vin models: 13 - 17 V
48 Vin models: 29 - 35 V
Input filter
internal capacitor
Recommended input fuse
9 Vin models: 1.0 A (slow blow type)
12 Vin models: 0.5 A (slow blow type)
24 Vin models: 0.315 A (slow blow type)
48 Vin models: 0.16 A (slow blow type)
Conducted noise
EMC immunity
EN 55032 class A or B with external components
www.tracopower.com/overview/tec2
–
Application note for filter class A/B proposal
– ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
– Radiated immunity
– Fast transient / surge
(with external input capacitor)
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 1 kV perf. criteria A
all models: Nippon chemi-con KY 220µF/100V
EN 61000-4-6, 10 Vrms, perf. criteria A
EN 61000-4-8
– Conducted immunity
– Magnetic field immunity
100 A/m, continuous, perf. criteria A
1000 A/m, 1 sec., perf. criteria A
Output Specifications
Voltage set accuracy
1 % max.
Regulation
– Input variation (Vin min. to Vin max.)
0.2 % max.
– Load variation (0 – 100 %)
– Load variation (10 – 90 %)
– Cross regulation
single output: 1 % max.
dual output: 1 % max. (balanced load)
single output: 0.5 % max.
dual output: 0.8 % max. (balanced load)
dual output: 5 % max. (asymmetrical load 25 % / 100 %)
Temperature coefficient
0.02 %/K max.
Ripple and noise (20 MHz Bandwidth)
Current limitation
75 mVp-p typ.
140 - 240 % of Iout max.
continuous, automatic recovery
Short circuit protection
Start up time
(constant resistive load)
– Power ON
– Remote ON
10 ms typ. / 20 ms max.
10 ms typ. / 20 ms max.
Transient response time (25% load step change)
500 μs typ.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2 of 4
TEC 2 Series, 2 Watt
Output Specifications (continued)
Capacitive load
– Single output
3.3 Vout models: 3300 µF max.
5.0 Vout models: 1680 µF max.
9.0 Vout models: 1000 µF max.
12 Vout models: 820 µF max.
15 Vout models: 680 µF max.
24 Vout models: 220 µF max.
– Dual output
5.0 Vout models: 1000 µF max. (each output)
12 Vout models: 470 µF max. (each output)
15 Vout models: 330 µF max. (each output)
General Specifications
Temperature ranges
– Operating (natural convection: 20 LFM, 0.1 m/s)
– Case temperature
–40°C to +95°C
+105°C max.
– Storage temperature
–55°C to +125°C
Derating
5.9 %/K above 88°C
5 – 95 % rel H max.
1‘600 VDC
Humidity (non condensing)
Isolation voltage
– I/O isolation voltage (60 s)
Isolation resistance (input/output)
1 GOhm min.
Isolation capacitance (input/output)
50 pF max.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign)
Switching frequency
6‘621‘000 h
100 kHz min. (pulse frequency modulation)
MIL-STD-810F
Shock, vibration and thermal shock
Remote On/Off
– On:
– Off:
– Off idle current:
open circuit or high impedance
2 – 4 mA current applied via 1kOhm resistor
2.5 mA typ.
Safety standards
– Desinged to meet (no certification)
IEC/EN/UL 62368-1, UL 60950-1
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Physical Specifications
Casing material
non-conducting black plastic
Silicone (UL 94V-0 rated)
tinned copper
Potting material
Pin material
Package weight
4.5 g (0.16 oz)
Soldering profile
260°C / 10 s max. (wave soldering)
Supporting Documents: www.tracopower.com/overview/tec2
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 3 of 4
TEC 2 Series, 2 Watt
Outline Dimensions
Pin-Out
Pin
1
Single
Dual
–Vin (GND) –Vin (GND)
+Vin (VCC) +Vin (VCC)
2
3
On/Off
NC
On/Off
NC
5
6
+Vout
–Vout
NC
+Vout
Common
–Vout
7
8
2.0 2 x 2.54 5.08
3 x 2.54
(3 x 0.1)
(0.08) (2 x 0.1)
(0.2)
NC: not connected
(0.86)
21.8
bottom view
5
1
2
3
6
7
8
Dimensions in [mm], () = Inch
Tolerances: x.xx
0.5 ( 0.02)
0.25 ( 0.01)
0.1 ( 0.004)
Pin pitch tolerances
Pin dimension tolerance
0.5 (0.02)
©
Copyright 2018 Traco Electronic AG
Specifications can be changed without notice!
Rev. May 30, 2018
Page 4 of 4
www.tracopower.com
相关型号：
©2020 ICPDF网 联系我们和版权申明