TEL15_18 [TRACOPOWER]
DC/DC Converters;型号: | TEL15_18 |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总3页 (文件大小:236K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
TEL 15 Series, 15 Watt
CB
Scheme
UL 60950-1
Features
◆ High efficiency up to 86 %
◆ Operating temperature range
–40°C to +80°C
◆ Indefinite short-circuit protection
◆ I/O isolation 1500 VDC
◆ Industry standard pinout
◆ Cost optimized design
◆ Lead free design, RoHS compliant
◆ 3-year product warranty
The TEL 15 series is a range of DC/DC-converter modules with wide input range of
2:1. State of the art SMD-technology guarantees a product with very high reliability
and good cost /performance ratio. High efficiency allows an operating temperature
range of –40°C to +80°C at full load. This product serie provides an economical
solution for many cost critical applications in industrial and consumer electronics.
Models
Ordercode
TEL 15-1210
TEL 15-1211
TEL 15-1212
TEL 15-1213
TEL 15-1222
TEL 15-1223
TEL 15-2410
TEL 15-2411
TEL 15-2412
TEL 15-2413
TEL 15-2422
TEL 15-2423
TEL 15-4810
TEL 15-4811
TEL 15-4812
TEL 15-4813
TEL 15-4822
TEL 15-4823
Input voltage range
Output voltage
3.3 VDC
5.1 VDC
12 VDC
15 VDC
12 VDC
15 VDC
3.3 VDC
5.1 VDC
12 VDC
15 VDC
12 VDC
15 VDC
3.3 VDC
5.1 VDC
12 VDC
15 VDC
12 VDC
15 VDC
Output current max.
3‘000 mA
3‘000 mA
1’250 mA
1’000 mA
625 mA
Efficiency typ.
78 %
81 %
86 %
86 %
86 %
86 %
78 %
81 %
86 %
86 %
86 %
86 %
78 %
81 %
86 %
86 %
86 %
86 %
9 – 18 VDC
(nominal 12 VDC)
500 mA
3‘000 mA
3‘000 mA
1’250 mA
1’000 mA
625 mA
18 – 36 VDC
(nominal 24 VDC)
500 mA
3‘000 mA
3‘000 mA
1’250 mA
1’000 mA
625 mA
36 – 75 VDC
(nominal 48 VDC)
500 mA
http://www.tracopower.com
Page 1 of 3
DC/DC Converters
TEL 15 Series
15 Watt
Input Specifications
Input current no load
12 Vin models: 30 mA typ.
24 Vin models: 20 mA typ.
48 Vin models: 10 mA typ.
Input current (full load)
12 Vin;
12 Vin;
24 Vin;
24 Vin;
48 Vin;
48 Vin;
3.3 Vout models: 1050 mA typ.
other output models: 1500 mA typ.
3.3 Vout models:
other output models:
3.3 Vout models:
550 mA typ.
750 mA typ.
250 mA typ.
350 mA typ.
other output models:
Start-up voltage / under voltage shut down
12 Vin models: 8.5 VDC / 8.0 VDC typ.
24 Vin models: 17 VDC / 15 VDC typ.
48 Vin models: 33 VDC / 29 VDC typ.
Surge voltage
(100 msec. max.)
12 Vin models:
24 Vin models:
25 V max.
50 V max.
48 Vin models: 100 V max.
Output Specifications
Voltage set accuracy
1 %
Regulation
– Input variation Vin min. to Vin max.
1 % max.
– Load variation 10 – 100 %
single output models: 0.5 % max.
dual output models balanced load: 1 % max.
dual output models unbalanced load: 3 % max. / Minimum load 10 %
Ripple and noise (20 MHz Bandwidth)
single output models: 50 mVpk-pk max.
dual output models: 75 mVpk-pk max
Temperature coefficient
Output current limitation
Short circuit protection
Capacitive load
0.02 %/K
>120 % of Iout max., foldback
indefinite (automatic recovery)
single output models: 470 µF max.
dual output models: 220 µF max. (per output)
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
–40°C to +80°C (without load derating)
+100°C max.
–55°C to +125°C
Power derating
– Natural convection
– Natural convection with heat sink (optional)
2.5 %/K above +60°C
1.0 %/K above +70°C
Humidity (non condensing)
95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60 sec.) – Input/Output
>700’000 h
1500 VDC
Isolation capacitance
Isolation resistance
– Input/Output
1200 pF typ.
– Input/Output (500 VDC)
>1000 M Ohm
Switching frequency (fixed)
Safety standards
330 kHz typ. (Pulse width modulation PWM)
UL/cUL 60950-1, IEC/EN 60950-1
(Compliance up to 60 VDC input voltage
(SELV limit)
Environmental compliance – Reach
www.tracopower.com/info/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 3
DC/DC Converters
TEL 15 Series
15 Watt
Physical Specifications
Casing material
Baseplate
copper nickel plated
non conductive FR4
epoxy (UL 94V-0 rated)
32 g (1.13oz)
Potting material
Weight
Soldering temperature
max. 265°C / 10 sec.
Outline Dimensions
50.8
(2.0)
1 5.2
20.32
Pin-Out
Single
(0.6)
(0.8)
Pin
1
Dual
3
+Vin (Vcc)
+Vin (Vcc)
Bottom View
2
–Vin (GND) –Vin (GND)
1
2
4
3
+Vout
No pin
–Vout
+Vout
Common
–Vout
4
5
5
Dimensions in [mm], () = Inch
Pin diameter: 1.0 0.05 (0.02 0.002)
Pin pitch tolerances: 0.13 ( 0.005)
Case tolerances: 0.25 ( 0.01)
Insulated baseplate
Heat-Sink (Option)
Heat-sink TEN-HS4 (optional)
Order code: TEN-HS4
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
9 g (0.31oz) without converter
Heat-sink
Thermal pad
Clamp
Material:
Finish:
Weight:
Converter
23.0 (0.91)
Thermal impedance after assembling: 10 K/W
18.0 (0.71)
max.
Note:
Before attaching the heatsink, the product
label on converter has to be removed for
optimal performance.
For volume orders we can supply the
converters with heatsink already mounted.
Please contact us for a relative quotation.
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. July 13, 2018
www.tracopower.com
Page 3 of 3
相关型号:
©2020 ICPDF网 联系我们和版权申明