TEN3-4813 [TRACOPOWER]
DC/DC Converter; DC / DC转换器型号: | TEN3-4813 |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converter |
文件: | 总3页 (文件大小:53K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/ DC Converter
TEN 3 Series
3 Watt
Features
Wide 2 : 1 Input Range
High Efficiency up to 84%
Full SMD-Design
Indefinite Short-Circuit Protection
I/ O-Isolation 1’500 VDC
Input Filter to meet EN 55022, Class
A and FCC, Level A without external
Components
N EW
24-pin DIP with industry Standard
Pinout
High Reliability, MTBF >1.1 Mio. h
2 Year Product Warranty
The TEN 3 series of DC/ DC converters, comprising 28 models, has been
designed for a wide range of applications in industrial and communication
systems. High efficiency allows an operating temperature range of - 40°C to
+75°C without derating. Other features of these converters are internal filter-
ing according to EN 55022-A and FCC, level A. Full SMD-design guarantees
a high reliability of this product.
Models
Ordercode
Input voltage range
Output voltage
Output current max.
Efficiency typ.
TEN 3-0510
TEN 3-0511
TEN 3-0512
TEN 3-0513
TEN 3-0521
TEN 3-0522
TEN 3-0523
3.3 VDC
600 mA
500 mA
250 mA
70 %
73 %
77 %
77 %
72 %
75 %
75 %
5
VDC
12 VDC
15 VDC
4.5 – 9.0 VDC
200 mA
±
5
VDC
± 250 mA
± 125 mA
± 100 mA
± 12 VDC
± 15 VDC
TEN 3-1210
TEN 3-1211
TEN 3-1212
TEN 3-1213
TEN 3-1221
TEN 3-1222
TEN 3-1223
3.3 VDC
600 mA
500 mA
250 mA
74 %
78 %
82 %
82 %
77 %
80 %
80 %
5
VDC
12 VDC
15 VDC
9 – 18 VDC
200 mA
±
5
VDC
± 250 mA
± 125 mA
± 100 mA
± 12 VDC
± 15 VDC
TEN 3-2410
TEN 3-2411
TEN 3-2412
TEN 3-2413
TEN 3-2421
TEN 3-2422
TEN 3-2423
3.3 VDC
600 mA
500 mA
250 mA
76 %
79 %
84 %
84 %
79 %
82 %
82 %
5
VDC
12 VDC
15 VDC
18 – 36 VDC
200 mA
±
5
VDC
± 250 mA
± 125 mA
± 100 mA
± 12 VDC
± 15 VDC
TEN 3-4810
TEN 3-4811
TEN 3-4812
TEN 3-4813
TEN 3-2421
TEN 3-4822
TEN 3-4823
3.3 VDC
600 mA
500 mA
250 mA
76 %
79 %
84 %
84 %
80 %
84 %
84 %
5
VDC
12 VDC
15 VDC
36 – 72 VDC
200 mA
±
5
VDC
± 250 mA
± 125 mA
± 100 mA
± 12 VDC
± 15 VDC
www.tracopower.com
Page 1
DC/ DC Converter
TEN 3 Series
3 Watt
Input Specifications
Input current no load / full load
5 Vin models
12 Vin models
24 Vin models
48 Vin models
40 mA / 800 mA typ.
20 mA / 300 mA typ.
5 mA / 150 mA typ.
3 mA / 75 mA typ.
Start-up voltage /
under voltage shut down
5 Vin models
12 Vin models
24 Vin models
48 Vin models
4 VDC / 3.5 VDC typ.
7 VDC / 6.5 VDC typ.
12 VDC / 11 VDC typ.
24 VDC / 22 VDC typ
Surge voltage (1 sec. max.)
5 Vin models
12 Vin models
24 Vin models
48 Vin models
11 V max.
25 V max.
50 V max.
100 V max.
Reverse voltage protection
Conducted noise (input)
Output Specifications
Voltage set accuracy
1.0 A max.
(5 V input models excluded)
EN 55022 level A, FCC part 15, level A
± 1 %
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 100 %
± 0.5 % max.
– single output models
– dual output models balanced load
– dual output models unbalanced load
± 0.5 % max.
± 1.0 % max.
± 2.0 % max.
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
50 mVpk-pk max
± 0.02 % / °C
Current limitation
> 110% of Iout max., constant current
Short circuit protection
Hiccup mode, indefinite
(no automatic recovery)
Capacitive load
– single output models
– dual output models
400 µF max.
100 µF max.
General Specifications
Temperature ranges
– Operating
– Case temperature
– 40 °C ... + 75 °C (no derating)
+ 95 °C max.
– Storage
– 40 °C ... + 125 °C
Humidity (non condensing)
95 % rel H max.
>1.1 Mio. h @ + 25 °C
1’500 VDC
Reliability, calculated MTBF (MIL-HDBK-217 E)
Isolation voltage
Input/ Output
Isolation capacity
Isolation resistance
Switching frequency
Safety standards
Input/ Output
65 pF typ
Input/ Output (500 VDC)
> 1‘000 M Ohm
300 kHz typ. (Pulse frequency modulation PFM)
UL 1950 , IEC 60950, EN 60950
Compliance up to 60 VDC input
voltage (SELV limit)
Safety approval
cUL / UL (File no. E188913)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2
DC/ DC Converter
TEN 3 Series
3 Watt
Physical Specifications
Case material
non conductive black plastic
(flammability to UL 94V-0)
Weight
12 g (0.42 oz)
Soldering temperature
max. 260 °C / 10 sec.
Outline Dimensions mm (inches)
Pin-Out
2
3
9
11
Pin
2
Single
Dual
–Vin (GND) –Vin (GND)
–Vin (GND) –Vin (GND)
Bottom view
3
9
No pin
No function
+Vout
Common
–Vout
23 22
16
14
11
14
16
22
23
+Vout
–Vout
Common
+Vin (Vcc)
+Vin (Vcc)
+Vin (Vcc)
+Vin (Vcc)
2.54
(0.1)
15.24 (0.6)
22.86 (0.9)
5.08
(0.2)
4.5 ±0.5
(0.18 ±0.02
)
32 ±0.5 (1.25 ±0.02
)
Pin diameter ø 0.5 ±0.05 (0.02) ±0.002
Tolerances ±0.5 (0.02)
Specifications can be changed without notice
Rev. 06/ 00
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Page 3
Tel. +41-1284 2911 • Fax +41-1201 1168 • e mail: sales traco.ch • internet: http:// www.tracopower.com
-
@
相关型号:
TEN3-4813N
The up to date design enables a cost reduction without any compromise to reliability and function.
TRACOPOWER
TEN3-4815N
The up to date design enables a cost reduction without any compromise to reliability and function.
TRACOPOWER
TEN3-4821N
The up to date design enables a cost reduction without any compromise to reliability and function.
TRACOPOWER
TEN3-4822N
The up to date design enables a cost reduction without any compromise to reliability and function.
TRACOPOWER
©2020 ICPDF网 联系我们和版权申明