TEN30_18 [TRACOPOWER]

DC/DC Converters;


型号：	TEN30_18
厂家：	TRACO ELECTRONIC AG
描述：	DC/DC Converters
文件：	总4页 (文件大小：352K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DC/DC Converters

TEN 30 Series, 30 Watt

Scheme

Features

UL 60950-1

◆ Smallest encapsulated 30 W converter

◆ 2’’ x 1’’ x 0.4’’ shielded metal package

with isolated baseplate

◆ Single- and dual output models

◆ I/O isolation voltage 1500 VDC

◆ Excellent efﬁciency up to 91 %

◆ Operating temperature range

–40°C to +85°C

The TEN-30 series is the latest generation of high performance dc-dc converter

modules setting a new standard concerning power density. This product with

30W comes in an encapsulated, shielded metal package with a footprint of only

1.0” x 2.0”. All models have wide 2:1 input voltage range and precisely regulated,

isolated output voltages. Advanced circuit topology provides high efﬁciency up to

91% which allows an industrial operating temperature range of –40°C to +85°C

(with derating).

◆ Remote On/Off

◆ Over-temperature protection

◆ꢀ3-year product warranty

Further features include remote On/Off, trimmable output, under-voltage lockout

and overtemperature protection. Typical applications for these converters are mo-

bile equipment, instrumentation, distributed power architectures in communication

and industrial electronics and everywhere where space on the PCB is critical.

Models

Ordercode

Input voltage

Output voltage

Output current max.

Efﬁciency typ.

TEN 30-1210

TEN 30-1211

TEN 30-1212

TEN 30-1213

TEN 30-1221

TEN 30-1222

TEN 30-1223

3.3 VDC

5.1 VDC

12 VDC

15 VDC

5 VDC

8‘000 mA

6‘000 mA

2‘500 mA

2‘000 mA

3‘000 mA

1‘250 mA

1‘000 mA

85 %

87 %

89 %

87 %

9 – 18 VDC

(nominal 12 VDC)

12 VDC

15 VDC

TEN 30-2410

TEN 30-2411

TEN 30-2412

TEN 30-2413

TEN 30-2421

TEN 30-2422

TEN 30-2423

3.3 VDC

5.1 VDC

12 VDC

15 VDC

5 VDC

8’000 mA

6‘000 mA

2‘500 mA

2‘000 mA

3‘000 mA

1‘250 mA

1‘000 mA

87 %

90 %

91 %

90 %

89 %

90 %

18 – 36 VDC

(nominal 24 VDC)

12 VDC

15 VDC

TEN 30-4810

TEN 30-4811

TEN 30-4812

TEN 30-4813

TEN 30-4821

TEN 30-4822

TEN 30-4823

3.3 VDC

5.1 VDC

12 VDC

15 VDC

5 VDC

7‘500 mA

6‘000 mA

2‘500 mA

2‘000 mA

3‘000 mA

1‘250 mA

1‘000 mA

87 %

89 %

91 %

90 %

88 %

89 %

36 – 75 VDC

(nominal 48 VDC)

12 VDC

15 VDC

http://www.tracopower.com

Page 1 of 4

DC/DC Converters

TEN 30 Series,

30 Watt

Input Specifications

Input current at no load

– 12 Vin models

– 24 Vin models

– 48 Vin models

12 / 15 Vout models: 50 mA typ.

other output models: 110 mA typ.

5.1 / 5 Vout models: 70 mA typ.

other output models: 40 mA typ.

15 Vout model: 20 mA typ.

other output models: 44 mA typ.

Input current at full load

– 12 Vin models

– 24 Vin models

– 48 Vin models

3.3 Vout models: 2700 mA typ.

other output models: 3000 mA typ.

3.3 Vout models: 1300 mA typ.

other output models: 1500 mA typ.

3.3 Vout models: 650 mA typ.

other output models: 750 mA typ.

Start-up voltage /

under voltage shut down

12 V models: 9 VDC / 8 VDC typ.

24 V models: 18 VDC / 16 VDC typ.

48 V models: 36 VDC / 32 VDC typ.

Surge voltage (100 ms max.)

Conducted noise (input)

12 V models: 25 V max.

24 V models: 50 V max..

48 V models: 100 V max.

EN 55032 class A with input capacitor

12 V models: 10 µF / 25 V 1812 MLCC

24 V models: 4.7 µF / 50 V 1812 MLCC

48 V models: 2.2 µF / 100 V 1812 MLCC

Output Specifications

Voltage set accuracy

Output voltage adj. range

Regulation

1 %

10 % (only for single output models)

– Input variation Vin min. to Vin max.

0.2 % max.

– Load variation 0 – 100 %

single output models: 0.5 % max.

dual output models balanced load: 1.0 % max.

dual output models unbalanced load (25% /100%): 5.0 % max.

Minimum load

not required

0.02 %/K

Temperature coefficient

Ripple and noise (20 MHz Bandwidth)

100 mVpk-pk max.

(150 mVpk-pk for 12/ 12/15/ 15V models)

Start up time (nominal Vin and constant resistive load)

Transient response time (25% load change)

Short circuit protection

30 ms typ.

250 µs typ.

indefinite, automatic recovery

150 % of Iout max. typ.

Over load protection

Over voltage protection

3.3 VDC models: 3.9 V

5.1 VDC models: 6.2 V

12 VDC models: 15 V

15 VDC models: 18 V

Capacitive load (max.)

3.3 Vout models: 20’000 µF

5.1 Vout models: 14’400 µF

12 Vout models: 3’000 µF

15 Vout models: 2’000 µF

5 Vout models: 3’000 µF (each output)

12 Vout models: 2’000 µF (each output)

15 Vout models: 1’300 µF (each output)

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 2 of 4

DC/DC Converters

TEN 30 Series,

30 Watt

General Specifications

Temperature ranges

– Operating

– Case temperature

– Storage

– 40°C to +85°C

+105°C max.

– 55°C to +125°C

Load derating

3.3 %/K above +60°C

at +115°C typ.

Over temperature protection

Humidity (non condensing)

Thermal inpedance

5 % to 95 % rel H max.

– Natural convection

– Natural convection with heat sink

12 °C/W

10 °C/W

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)

1.4 Mio. h

Isolation voltage (60 s)

Isolation capacitance

Isolation resistance

Remote On/Off:

– Input/Output

1‘500 VDC

– Input/Output

1500 pF max.

– Input/Output (500 VDC)

>1’000 MOhm

– On:

– Off:

– Standby current:

3 to 12 VDC or open circuit.

0 to 1.2 VDC or short circuit pin 3 and pin 2

3 mA max.

Switching frequency (fixed)

Vibration and thermal shock

Safety approvals

430 kHz typ. (puls width modulation)

MIL-STD-810F

cUL/UL 60950-1, IEC/EN 60950-1

– Certification documents

www.tracopower.com/overview/ten30

Output Voltage Adjustment

Trim up

Trim down

Trim

+Vout

Trim

Nominal output voltage at open Trim input!

Rd [kohm]

Vout

Ru [kohm]

output

+5%

1.5

0.56 4.3

2.5 3.3V 5.1V 12V 15V

output

–5%

1.5

0.68 6.2

2.5 3.3V 5.1V 12V 15V

6.8

5.1

8.2

6.2

+10%

0.051 0.33 0.75 0.75 4.3

1.8

–10%

0.062 0.75 0.62 0.82 5.6

2.2

Physical Specifications

Casing material

Baseplate

copper, nickel plated

non conductive FR4

Potting material

Weight

epoxy (UL 94V-0 -rated)

31 g (1.1 oz)

Soldering temperature

max. 265°C / 10 s

Environmental compliance – Reach

www.tracopower.com/info/reach-declaration.pdf

RoHS directive 2011/65/EU

– RoHS

Supporting documents: www.tracopower.com/overview/ten30

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 3 of 4

DC/DC Converters

TEN 30 Series,

30 Watt

Outline Dimensions

15.24

(0.6)

5.08

(0.2)

Pin-Out

2.54

(0.1)

Single

Dual

+Vin (Vcc)

2 1

+Vin (Vcc)

–Vin (GND) –Vin (GND)

Remote On/Off

Bottom View

+ Vout

–Vout

Trim

+ Vout

Common

–Vout

Dimensions in [mm], () = Inch

5.6

10.16

(0.4)

(0.22)

10.2

(0.4)

Pin diameter: 1.0 0.1 (0.04 0.004)

Pin pitch tolerances: 0.25 ( 0.01)

Case tolerances: 0.5 ( 0.02)

20.32

(0.8)

25.4

(1.0)

Heat-Sink (Option)

Order code: TEN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Aluminum

Anodic treatment (black)

17g (0.60oz) without converter

Material:

Finish:

Weight:

Thermal impedance after assembling: 10 K/W

56.0 (2.2) max.

Note:

The product label on converter has to be re-

moved before mounting the heat-sink.

For volume orders converters will be supplied

with heat-sinks already mounted. Please con-

tact factory for quotation.

Heat-sink

Thermal pad

Clamp

Converter

Separate heat-sinks are only available for

prototypes and small quantity orders.

16.8 (0.66)

max.

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

Rev. July 13, 2018

www.tracopower.com

Page 4 of 4

相关型号：