TEN40-2433 [TRACOPOWER]
DC/DC Converters - TEN 40 Series, 40 Watt; DC / DC转换器 - TEN 40系列， 40瓦
| 型号： | TEN40-2433 |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converters - TEN 40 Series, 40 Watt |
| 文件： | 总9页 (文件大小：311K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converters
TEN 40 Series, 40 Watt
Features
◆ High Power Density: 40W in a
RoHS
compliant
51x51x10mm (2”x2”x0.4”) Package
◆ Wide 2:1 Input Voltage Range
◆ Models with Single-, Dual- and
Triple Output
◆ Models with 2 independently regulated
3.3 and 5.0 VDC Outputs
◆ Extended Operating Temperature
Range: –40°C to +85°C
◆ Over Temperature Protection
◆ Under Voltage Lockout
◆ Remote On/Off
The TEN 40 series is a family of high performance 40W dc-dc converter modules
featuring 30 standard models with wide 2:1 input voltage ranges in a compact low
profile case with industry-standard footprint. A very high efficiency allows an oper-
ating temperature range of –40°C to 85°C. Built-in filters for both input and output
minimizes the need for external filtering. Further standard features include remote
On/Off, output voltage trimming, over voltage protection, under voltage lockout and
short circuit protection.
◆ Shielded metal Case with insulated
Baseplate
◆ Optional Heatsink
Typical applications for these products are battery operated equipment and distributed
power architectures in communication and industrial electronics, everywhere where
isolated, tightly regulated voltages are required and space is limited on the PCB.
◆ Lead free Design - RoHS compliant
◆ 3 Years Product Warranty
Models
Order code
Input voltage range
9 – 18 VDC
Output 1
Output 2
Output 3
Efficiency typ..
TEN 40-1210
TEN 40-1211
3.3 VDC / 8.0 A
5 VDC / 8.0 A
86 %
86 %
TEN 40-1212
TEN 40-1220
TEN 40-1222
TEN 40-1223
TEN 40-1233
TEN 40-1234
TEN 40-1231
TEN 40-1232
TEN 40-2410
TEN 40-2411
TEN 40-2412
TEN 40-2420
TEN 40-2422
TEN 40-2423
TEN 40-2433
TEN 40-2434
TEN 40-2431
TEN 40-2432
TEN 40-4810
TEN 40-4811
TEN 40-4812
TEN 40-4820
TEN 40-4822
TEN 40-4823
TEN 40-4833
TEN 40-4834
TEN 40-4831
TEN 40-4832
12 VDC / 3.3 A
*3.3 VDC / 8.0 A
+12 VDC / 1.8 A
+15 VDC / 1.4 A
3.3 VDC / 6.0 A
3.3 VDC / 6.0 A
5 VDC / 6.0 A
5 VDC / 6.0 A
3.3 VDC / 8.0 A
5 VDC / 8.0 A
12 VDC / 3.3 A
*3.3 VDC / 8.0 A
+12 VDC / 1.8 A
+15 VDC / 1.4 A
3.3 VDC / 6.0 A
3.3 VDC / 6.0 A
5 VDC / 6.0 A
5 VDC / 6.0 A
3.3 VDC / 8.0 A
5 VDC / 8.0 A
86 %
85 %
85 %
85 %
84 %
84 %
86 %
86 %
87 %
89 %
88 %
86 %
87 %
87 %
85 %
85 %
87 %
87 %
88 %
90 %
89 %
88 %
87 %
87 %
86 %
86 %
88 %
88 %
*5 VDC / 8.0 A
–12 VDC / 1.8 A
–15 VDC / 1.4 A
+12 VDC / 0.4 A
+15 VDC / 0.3 A
+12 VDC / 0.4 A
+15 VDC / 0.3 A
–12 VDC / 0.4 A
–15 VDC / 0.3 A
–12 VDC / 0.4 A
–15 VDC / 0.3 A
*5 VDC / 8.0 A
–12 VDC / 1.8 A
–15 VDC / 1.4 A
+12 VDC / 0.4 A
+15 VDC / 0.3 A
+12 VDC / 0.4 A
+15 VDC / 0.3 A
18 – 36 VDC
–12 VDC / 0.4 A
–15 VDC / 0.3 A
–12 VDC / 0.4 A
–15 VDC / 0.3 A
12 VDC / 3.3 A
*3.3 VDC / 8.0 A
+12 VDC / 1.8 A
+15 VDC / 1.4 A
3.3 VDC / 6.0 A
3.3 VDC / 6.0 A
5 VDC / 6.0 A
*5 VDC / 8.0 A
–12 VDC / 1.8 A
–15 VDC / 1.4 A
+12 VDC / 0.4 A
+15 VDC / 0.3 A
+12 VDC / 0.4 A
+15 VDC / 0.3 A
36 – 75 VDC
–12 VDC / 0.4 A
–15 VDC / 0.3 A
–12 VDC / 0.4 A
–15 VDC / 0.3 A
5 VDC / 6.0 A
* dynamic current allocation, max. 8A total output current for both outputs together
http://www.tracopower.com
Page 1 of 9
DC/DC Converters
TEN 40
40 Watt
Input Specifications
Input current at no load
12 V models: 200 mA typ.
24 V models: 100 mA typ.
48 V models: 50 mA typ.
Input current at full load
(nominal input 12/24/48 Vin)
3.3 V single output models: 2680 / 1325 / 655 mA typ.
5.0 / 12 V single output models: 4065 / 2000 / 1000 mA typ.
3.3 & 5 V dual output models: 3415 / 1685 / 825 mA typ.
±12 / ±15 V dual output models: 4400 / 2100 / 1050 mA typ.
3.3 V triple output models: 3000 / 1500 / 750 mA typ.
5.0 V triple output models: 4000 / 1990 / 980 mA typ.
Input voltage variation (dv/dt)
5 V/ms, max.
(complies with ETS300 132 part 4.4)
Start-up voltage / under voltage lockout
12 Vin models: 9 VDC / 8 VDC (typ.)
24 Vin models: 17.8 VDC / 15.8 VDC (typ.)
48 Vin models: 36 VDC / 33 VDC (typ.)
Surge voltage (100 msec. max.)
Conducted noise (input)
12 / 24 / 48 Vin models: 25/50/100 V max.
EN 55022 level A, FCC part 15, level A with
external capacitor (see note 1)
ESD (input)
EN 61000-4-2, perf. criteria B
EN 61000-4-4, perf. criteria B
EN 61000-4-5, perf. criteria B
Fast transient (input)
Surge (input)
Output Specifications
Voltage set accuracy
± 1% (± 5% for auxilary outputs)
Output voltage adjustment
± 10% (only for single output models and
symetric dual output models)
Regulation
– Input variation Vin min. to Vin max.
single output models: ± 0.5% max.
dual output models: ± 1% max.
triple output models (main/auxiliary): ± 1% max. / 5% max.
– Load variation 10 – 100 %
single output models: ± 0.5% max.
dual output models: ± 1% max.
triple output models: ± 2% max. / ± 5% max.
– Load cross variation 25 % /100 %
Dual output models: ± 5% max.
triple output models (main/auxiliary): ± 1% max. / 5 % max.
Temperature coefficient
± 0.02%/K max.
Ripple and noise (20 MHz Bandwidth)
3.3 V & 5 V outputs:
50 mVpk-pk max.
dual outputs: 150 mVpk-pk max.
all other outputs:
75 mVpk-pk max.
25 ms typ.
Start up time (nominal Vin and constant resistive load)
Transient response time (25% load change)
Short circuit protection
300 µs typ.
indefinite (automatic recovery)
150% of Iout max typ. foldback
@ 115°C typ
Over load protection
Thermal shutdown
Over voltage protection
3.3 V output: 3.9 V
5 V output: 6.2 V
12 V output: 15 V
15 V output: 18 V
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 9
DC/DC Converters
TEN 40
40 Watt
Output Specifications
Minimum load (only for dual output models)
10% of rated max current (operation at lower load
condition will not damage these converters, however,
they may not meet all listed specifications)
Capacitive load output models
3.3 V / 5 V / 12 V / 15 V: 21’000 / 13’600 / 2’360 / 1510 µF max.
dual output models (3.3 V / 5 V): 11’000 / 6’800 µF max.
dual output models (± 12 V / ± 15V):
1’200 / 750 µF max. (on each output)
3.3 V triple output models: 13’000 / 330 µF max. (main-/output 2 & 3)
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
– 40 °C ... + 85 °C
+ 100 °C max.
– 55 °C ... + 125 °C
Derating
see graphs on page 3 to 5
95 % rel H max.
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217 E)
> 510’000 h @ + 25 °C
Isolation (Input/Output)
– Voltage
1‘500 VDC
– Capacity
– Resistance
1000 pF max.
> 1‘000 M Ohm
Remote On/Off
– On:
– Off:
– Off idle current:
3.5 ... 12 VDC or open circuit.
0 ... 1.2 VDC or short circuit pin 3 and pin 2
2.5 mA max.
Switching frequency (fixed)
Vibration
300 kHz typ. (Pulse width modulation PWM)
10-55Hz, 2G, 30 minutes along X,Y,Z
Safety standards
UL 1950, EN 60950, IEC 60950 compliance
up to 60 VDC input voltage (SELV limit)
Safety approvals
UL /cUL File E 188913
Note 1:
In order to meet conducted emissions EN55022-A and EN55011-A a capacitor between +Vin and -Vin has to be installed. The capacitor
should be capable to handle 1 A ripple current. A suggestion is KMF Series of Nippon chemi-con, 220µF/100V, ESR 90mOhm.
Output Voltage Adjustment
Trim up
Trim
+Vout
Trim
Trim down
Rd
Ru
-
Vout
Ru [kohm]*
Ru [kohm]*
output
+5%
3.3V
6.8
5V
4.7
12V ±12V ±15V
output
–5%
3.3V
8.2
5V
5.6
12V ±12V ±15V
47
47
33
56
33
39
+10%
1.5 0.56 8.2
2.2
2.7
–10%
0.68 0.68 5.6
2.7
3.3
*approximate values
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 9
DC/DC Converters
TEN 40
40 Watt
Power De-rating
Natural convection without heat-sink
Natural convection with heat-sink TEN-HS3
500 LFM with heat-sink TEN-HS3
TEN 40-1210
TEN 40-1211
100
100
80
60
40
20
0
80
60
40
20
0
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-1212
TEN 40-1220
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-1222
TEN 40-1223
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
http://www.tracopower.com
Page 4 of 9
DC/DC Converters
TEN 40
40 Watt
Power De-rating
TEN 40-1231
TEN 40-1232
100
100
80
60
40
20
0
80
60
40
20
0
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-1233
TEN 40-1234
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-2410
TEN 40-2411
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
http://www.tracopower.com
Page 5 of 9
DC/DC Converters
TEN 40
40 Watt
Power De-rating
TEN 40-2412
TEN 40-2420
100
100
80
60
40
20
0
80
60
40
20
0
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-2422
TEN 40-2423
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-2431
TEN 40-2432
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
http://www.tracopower.com
Page 6 of 9
DC/DC Converters
TEN 40
40 Watt
Power De-rating
TEN 40-2433
TEN 40-2434
100
100
80
60
40
20
0
80
60
40
20
0
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-4810
TEN 40-4811
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-4812
TEN 40-4820
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
http://www.tracopower.com
Page 7 of 9
DC/DC Converters
TEN 40
40 Watt
Power De-rating
TEN 40-4822
TEN 40-4823
100
100
80
60
40
20
0
80
60
40
20
0
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
-40
-20
0
0
0
20
40
60
80
80
80
100
100
100
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-4831
TEN 40-4832
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
TEN 40-4833
TEN 40-4834
100
80
60
40
20
0
100
80
60
40
20
0
-40
-20
20
40
60
-40
-20
20
40
60
Ambient Temperature [˚C]
Ambient Temperature [˚C]
http://www.tracopower.com
Page 8 of 9
DC/DC Converters
TEN 40
40 Watt
Physical Specifications
Case material
copper, nickel plated
none conductive FR4
epoxy (UL 94V-0 -rated)
65 g (2.3 oz)
Baseplate material
Potting material
Weight
Soldering temperature
max. 265 °C / 10 sec.
Outline Dimensions
Pin-Out
9
8
Pin
Single
Dual
Dual
Triple
3
symmetric
assymmetric
7
6
Bottom
view
1
2
3
4
5
6
7
8
9
+Vin (Vcc)
+Vin (Vcc)
+Vin (Vcc)
+Vin (Vcc)
2
1
–Vin (GND)
–Vin (GND)
–Vin (GND)
–Vin (GND)
5
4
Remote On/Off
No con.
–Sense
+Sense
+Vout
–Vout
No pin
+Vout
+ Vout 1
–Vout
+ Vout 2
Common 2/3
–Vout 3
45.7
(1.8)
3.5
(0.14)
Common
Common
–Vout
No con.
No con.
+Vout 2
–Vout2
50.8
(2.0)
10.2
(0.4)
+Vout 1
–Vout 1
Dimensions in [mm], () = Inch
Trim
Trim
No con.
Pin diameter: 1.0 ±0.05 (0.02 ±0.002)
Pin pitch tolerances: ±0.35 (±0.014)
Case tolerances: ±0.5 (±0.02)
Heat-sink TEN-HS3
Order code: TEN-HS3
56.0 (2.2) max.
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
22g (0.78oz) (without converter)
Material:
Finish:
Weight:
Heat-sink
Thermal pad
Clamp
Converter
17.0 (0.67)
max.
Note:
The product label on converter has to be removed before
mounting the heat-sink.
For volume orders converters will be supplied with heat-
sinks already mounted. Please contact factory for quota-
tion.
Separate heat-sinks are only available for prototypes and
small quantity orders.
Specifications can be changed without notice
Rev. 09/05
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43311 4511 · Fax +41 43311 4545 · info@traco.ch · www.tracopower.com
Page 7 of 9
相关型号：
©2020 ICPDF网 联系我们和版权申明