TEN404810WIN [TRACOPOWER]
DC/DC Converters;
| 型号： | TEN404810WIN |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converters |
| 文件： | 总4页 (文件大小：280K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converters
TEN 40WIN Series, 40 Watt
CB
Features
Scheme
◆ Highest power density:
40 W in 1” x 2” x 0.4” package
◆ Ultra wide 4:1 input range
◆ Excellent efficiency up to 90 %
◆ Output voltage adjustable
◆ Remote On/Off
◆ Protection against short circuit
and over voltage
◆ I/O isolation 1500 VDC
◆ Operating temperature range
–40°C to +75°C
The TEN 40WIN Series is a new range of isolated high performance DC/DC-con-
verter modules. Due to the very high efficiency of up to 90% these 40 W converters
come with a footprint of only 1.0” x 2.0”. The 12 models have an ultra wide 4:1
input voltage range and a tight output voltage regulation. The output voltage is ad-
justable by external resistor. Remote On/Off and protection against overpower and
over voltage are standard features of these converters.
◆ 3-year product warranty
Typical applications are in mobile equipment, instrumentation, distributed power
architectures in communication and industrial electronics and everywhere where
space on the PCB is limited.
Models
Order code
Input voltage range
Output voltage
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
Output current max.
8‘000 mA
8’000 mA
3‘330 mA
2‘670 mA
1‘670 mA
1’670 mA
1‘330 mA
8‘000 mA
8’000 mA
3‘330 mA
2‘670 mA
1‘670 mA
1’666 mA
1‘330 mA
Efficiency
89 %
90 %
89 %
89 %
91 %
88 %
88 %
89 %
90 %
90 %
90 %
89 %
88 %
88 %
TEN 40-2410WIN
TEN 40-2411WIN
TEN 40-2412WIN
TEN 40-2413WIN
TEN 40-2415WIN
TEN 40-2422WIN
TEN 40-2423WIN
TEN 40-4810WIN
TEN 40-4811WIN
TEN 40-4812WIN
TEN 40-4813WIN
TEN 40-4815WIN
TEN 40-4822WIN
TEN 40-4823WIN
9 – 36 VDC
(nominal 24 VDC)
18 – 75 VDC
(nominal 48 VDC)
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
TEN 40WIN Series 40 Watt
Input Specifications
Input current at no load
(nominal input voltage)
24 Vin;
24 Vin;
24 Vin;
24 Vin;
48 Vin;
48 Vin;
48 Vin;
48 Vin;
3.3 & 5.0 VDC models: 90 mA typ.
12 VDC models: 95 mA typ.
15 & 24 VDC models: 105 mA typ. / 115 mA typ.
dual output models: 65 mA typ.
3.3 & 5.0 VDC models: 55 mA typ.
12 & 15 VDC models: 60 mA typ. / 65 mA typ.
24 VDC models: 75 mA typ.
dual output models: 45 mA typ.
Surge voltage (100 msec. max.)
24 V models: 50 V max.
48 V models: 100 V max.
Reflected input ripple current
24 V models: 30 mA typ.
48 V models: 20 mA typ.
Conducted noise (input)
EN 55022 level A, FCC part 15, level A with
external capacitor see: application note
Start-up voltage / under voltage shut down
Recommended input fuse (slow blow)
24 V models: 9 VDC / 8.3 VDC (or lower)
48 V models: 18 VDC / 16.5 VDC (or lower)
24 V models: 8000 mA
48 V models: 4000 mA
Output Specifications
Voltage set accuracy
single output models: 1.0 %
dual output models (balanced load):
2.0 %
Output voltage adjustment range
10 % with external resistor (see below)
Regulation
– Input variation Vin min. to Vin max.
– Load variation single output models (0 – 100%):
0.5 % max.
0.5 % max.
dual output models (9 – 100%): 1.0 % max.
Minimum load
single output models: 0 %
dual output models: 9 % of rated max current (operation at lower
load condition will not damage the converters.
However, they may not meet all listed specifications)
Temperature coefficient
0.02 %/K
Ripple and noise (20 MHz Bandwidth)
with external capacitors 1 µF M/C 10 µF T/C
3.3 & 5.0 VDC models: 100 mVpk-pk. typ.
other models: 150 mVpk-pk typ.
Transient response (25 % load step change)
Short circuit protection
250 µs typ.
hiccup mode, indefinite (automatic recovery)
Over power protection
at 150 %
Over voltage protection
Capacitive load
at 120 % of Vout nom. typ.
3.3 VDC models: 21’000 µF max.
5.0 VDC models: 13’600 µF max.
12.0 VDC models: 2’400 µF max.
15.0 VDC models: 1’500 µF max.
24.0 VDC models: 600 µF max.
12.0 VDC models: 1’200 µF max. (each output)
15.0 VDC models: 750 µF max. (each output)
Output Voltage Adjustment
Single output models only, Ru/Rd tba. (open = nominal output voltage)
Trim up
Trim
Trim down
+Vout
Rd
Ru
Trim
-
Vout
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TEN 40WIN Series 40 Watt
General Specifications
Temperature ranges
– Operating (natural convection cooling 20 LFM)
– Case temperature
–40°C to +75°C (see load derating)
+105°C max.
– Storage
–50°C to +125°C
Load derating
– without heatsink
– with heatsink
2.5 %/K above 55°C
2.5 %/K above 65°C
Humidity (non condensing)
95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60 sec.) – Input/Output
330’000 h
1500 VDC
Isolation capacitance
Isolation resistance
– Input/Output
– Input/Output
1500 pF typ
>1000 Mohm
Switching frequency (fixed)
Safety standards
320 kHz typ. (pulse width modulation PWM)
UL/cUL 60950-1,
IEC 60950-1:2005 (2nd Edition); +A1:2009
Safety approvals
Remote On/Off
– CSA certificate (UL/cUL 60950-1 2nd edition)
– CB test certificate (IEC/EN 60950-1 2nd edition)
www.tracopower.com/products/ten40win-csa.pdf
www.tracopower.com/products/ten40win-cb.pdf
– On:
– Off:
– Off idle current:
4.7 to 12 VDC or open circuit.
0 to +1.2 VDC or short circuit pin 3 and pin 2
2.5 mA max.
Physical Specifications
Casing material
aluminum black anodized
epoxy (UL 94V-0 rated)
30 g (1.05 oz)
Potting material
Weight
Soldering temperature
max. 260°C / 10 sec.
Environmental compliance – Reach
www.tracopower.com/products/ten40win-reach.pdf
RoHS directive 2011/65/EU
– RoHS
Application note: www.tracopower.com/products/ten40win-application.pdf
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TEN 40WIN Series 40 Watt
Outline Dimensions
50.8
(2.0)
Pin-Out
Single
4
Pin
1
Dual
1
2
+Vin (Vcc)
+Vin (Vcc)
Bottom View
5
6
2
–Vin (GND) –Vin (GND)
Remote On/Off
3
3
4
+Vout
–Vout
Trim
+Vout
Common
–Vout
(1.8)
2.54 (0.1)
45.72
5
6
Dimensions in [mm], () = Inch
Pin diameter: 1.0 0.05 (0.04 0.002)
Pin pitch tolerance: 0.25 ( 0.01)
Case tolerances: 0.25 ( 0.01)
Heat-sink TEN-HS4 (optional)
Heat-sink
Thermal pad
Clamp
Converter
Order code: TEN-HS4
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
9.0 g (0.31oz) without converter
31.1 (1.22)
Material:
Finish:
Weight:
18.0 (0.71)
max.
Thermal impedance after assembling: 10 K/W
Note:
Before attaching the heatsink, the product label on
converter has to be removed for optimal performance.
For volume orders we can supply the converters with
heatsink already mounted.
Please contact us for a relative quotation.
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. February 14. 2014
www.tracopower.com
Page 4 of 4
相关型号：
©2020 ICPDF网 联系我们和版权申明