TEN602411N [TRACOPOWER]
DC/DC Converters;
| 型号： | TEN602411N |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converters |
| 文件： | 总4页 (文件大小：369K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converters
TEN 60N Series, 60 Watt
CB
Scheme
UL 60950-1
UL 60950-1
Features
◆ 2” x 1” metal package
◆ Wide 2:1 input voltage range
9–18, 18–36, 36–75 VDC
◆ High efficiency up to 92%
◆ Adjustable output voltage
◆ No minimum load required
◆ Operating temperature range
–40°C to +85°C
◆ Input filter to meet EN55022, class A
◆ Remote On/Off
The TEN 60N series is a family of high performance 60 Watt dc/dc converter
modules featuring wide 2:1 input voltage ranges in a six side shielded 2” x 1”
metal package with industry standard footprint. Standard features include remote
On/Off, over voltage protection, under voltage lockout and short circuit protection.
High efficiency across load range and low input current characteristics at no load
make these converters the ideal solution for battery-operated systems. Typical ap-
plications are in wireless networks, telecom/datacom, industry control systems and
measurement equipment.
◆ Under voltage lockout
◆ Lead free design, RoHS compliant
◆ 3-year product warranty
Models
Order code
Input voltage range
Output voltage
Output current max.
Efficiency typ.
TEN 60-1211N
TEN 60-1212N
TEN 60-1213N
TEN 60-1215N
TEN 60-1222N
TEN 60-1223N
TEN 60-1225N
TEN 60-2411N
TEN 60-2412N
TEN 60-2413N
TEN 60-2415N
TEN 60-2422N
TEN 60-2423N
TEN 60-2425N
TEN 60-4811N
TEN 60-4812N
TEN 60-4813N
TEN 60-4815N
TEN 60-4822N
TEN 60-4823N
TEN 60-4825N
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
12 VDC
15 VDC
24 VDC
12‘000 mA
5000 mA
4000 mA
2500 mA
2500 mA
2000 mA
1250 mA
12‘000 mA
5000 mA
4000 mA
2500 mA
2500 mA
2000 mA
1250 mA
12‘000 mA
5000 mA
4000 mA
2500 mA
2500 mA
2000 mA
1250 mA
90.5 %
90.5 %
91.5 %
91.5 %
90 %
90 %
91 %
92 %
92 %
92 %
92 %
90 %
90 %
91 %
92 %
92 %
92 %
92 %
91 %
91 %
9 – 18 VDC
(12 VDC nominal)
18 – 36 VDC
(24 VDC nominal)
36 – 75 VDC
(48 VDC nominal)
91 %
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
TEN 60N Series
60 Watt
Input Specifications
Input current at no load
Start-up voltage
10 mA typ.
12 Vin models: < 9.0 VDC
24 Vin models: < 18 VDC
48 Vin models: < 36 VDC
Under voltage shut down (lock-out circuit)
12 Vin models: 8.0 VDC typ.
24 Vin models: 16 VDC typ.
48 Vin models: 32 VDC typ.
Surge voltage (1 sec.)
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise
EN 55022 class Awith external components
filter proposal to be adviced
ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
Radiated immunity
EN 61000-4-3, 20 V/m, perf. criteria A
Fast transient / surge (with external input capacitor)
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 2 kV perf. criteria A
– external input capacitor
12 & 24 Vin models: Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm
and TVS 58V, 3000W peak (SMDJ58A) in parallel
48 Vin models: Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm
and TVS 120V, 3000W peak (SMDJ120A) in parallel
Conducted immunity
EN 61000-4-6, 10 Vrms, perf. criteria A
Output Specifications
Voltage set accuracy
1 %
Voltage adjustment range (single output models only)
15 & 24 VDC models: +20%, -10%
other models: 10 %
Regulation
– Input variation Vin min. to Vin max.
– Load variation 0 – 100 %
0.2 % max.
single output models: 0.5 % max.
dual output models: 1 % max.
– Load cross variation 25 % / 100 %
5 % max.
not required
0.02 %/K
Minimum load
Temperature coefficient
Ripple and noise (20 MHz bandwidth)
5.0 VDC: 100 mVp-p max. with 10µF/25V X7R MLCC
12 & 15 VDC: 125 mVp-p max. with 10µF/25V X7R MLCC
24 VDC: 200 mVp-p max. with 4.7µF/50V X7R MLCC
Start up time
(constant resistive load)
– Power On
– Remote On
60 ms typ.
60 ms typ.
Transient response (25% load step change)
Short circuit protection
250 µs typ.
continuous, automatic recovery
150 % of Iout max. typ. hiccup
Over load protection
Over-voltage protection (Zener diode, single output models only)
5 VDC models: 6.2 V
12 VDC models: 15 V
15 VDC models: 20 V
24 VDC models: 30 V
Capacitive load (max. values)
5.0 VDC models: 30’000 µF
12 VDC models: 5850 µF
15 VDC models: 3900 µF
24 VDC models: 2000 µF
12 VDC models: 3900 µF (each output)
15 VDC models: 2400 µF (each output)
24 VDC models: 1000 µF (each output)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TEN 60N Series
60 Watt
General Specifications
Temperature ranges
– Operating
– Casing temperature
– Storage
–40°C to +85°C (with derating)
+105°C max.
–55°C to +125°C
Power derating
– Natural convection
– Natural convection with heat sink (optional)
2.5 %/K above +50°C
2.25 %/K above +55°C
Thermal impedance
– Natural convection
– Natural convection with heat sink (optional)
10.8 K/W
10.3 K/W
Over-temperatur protection
at 115°C
Humidity (non condensing)
5 – 95 % rel. H
1500 VDC
Isolation voltage (60 sec.) – Input / Output
Isolation resistance
Isolation capacitance
Switching frequency
– Input / Output
– Input / Output
>1 GOhm
2’200 pF max.
250 kHz typ. (pulse width modulation PWM)
Thermal shock, mechanical shock & vibration
MIL-STD-810F
– Test conditions
www.tracopower.com/products/mil810.pdf
Safety standards
UL/cUL 60950-1, IEC/EN 60950-1
– Certification documents
– On:
– Off:
www.tracopower.com/overview/ten60n
Remote On/Off
3.0 ... 12 VDC or open circuit
0 ... 1.2 VDC or short circuit pin 3 and pin 2
3.0 mA
– Off idle current:
Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign)
880’000 h
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Output Voltage Adjustment (for single output models only)
Trim up
Trim down
Trim
+Vout
Rd
Ru
Trim
-
Vout
Nominal output voltage at open Trim input
Ru, Rd for adjustment to be adviced
Supporting documents: www.tracopower.com/overview/ten60n
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TEN 60N Series
60 Watt
Physical Specifications
Casing material
copper
Baseplate material
Potting material
non conductive FR4
silicone (UL94V-0 rated)
33 g (1.16oz)
Weight
Soldering temperature
max. +265°C / 10 sec.
Outline Dimensions
50.8
(2.0)
Pin-Out
Pin
1
Single
Dual
4
1
2
+Vin (Vcc)
+Vin (Vcc)
2
–Vin (GND) –Vin (GND)
Remote On/Off
Bottom View
5
6
3
3
4
+Vout
–Vout
TRIM
+Vout
Common
–Vout
(1.8)
2.54 (0.1)
5
45.72
6
Dimensions in [mm], () = Inch
Pin diameter: 1.0 0.1 (0.04 0.004)
Pin pitch tolerances: 0.25 ( 0.01)
Case tolerances: 0.5 ( 0.02)
Heat-Sink (Option)
Order code: TEN-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
17 g (0.60oz) without converter
Material:
Finish:
Weight:
56.0 (2.2) max.
Thermal impedance after assembling: 10.3 K/W
Heat-sink
Thermal pad
Clamp
Converter
Note:
Before attaching the heatsink, the product
label on converter has to be removed for
optimal performance.
16.8 (0.66)
max.
For volume orders we can supply the
converters with heatsink already mounted.
Please contact us for a relative quotation.
Dimensions in mm, () = Inch
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. July 11, 2018
www.tracopower.com
Page 4 of 4
相关型号：
©2020 ICPDF网 联系我们和版权申明