TEN60_18 [TRACOPOWER]

DC/DC Converters;
TEN60_18
型号: TEN60_18
厂家: TRACO ELECTRONIC AG    TRACO ELECTRONIC AG
描述:

DC/DC Converters

文件: 总4页 (文件大小:256K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DC/DC Converters  
TEN 60 Series, 60 Watt  
UL 60950-1  
Features  
Highest power density: 60W in a  
51x51x10mm (2”x2”x0.4”) package  
Wide 2:1 input voltage range  
Very high efficiency up to 90%  
No minimum load required  
Over temperature protection  
Under voltage lock-out circuit  
Remote On/Off  
Shielded metal case with insulated  
baseplate  
Optional heatsink  
Lead free design - RoHS compliant  
3-year product warranty  
The TEN 60 series is a family of high performance 60W dc-dc converter modules with  
wide 2:1 input voltage ranges in a compact low profile case with industry-standard  
footprint. A very high efficiency allows an operating temperature range of –40°C to  
85°C. Built-in filters for both input and output minimizes the need for external filtering.  
Further standard features include remote On/Off, output voltage trimming, over volt-  
age protection, under voltage lockout and short circuit protection.  
Typical applications for these products are battery operated equipment and distributed  
power architectures in communication and industrial electronics, everywhere where  
isolated, tightly regulated voltages are required and space is limited on the PCB.  
Models  
Order code  
Input voltage range  
Output voltage  
Output current max.  
Efficiency typ.  
TEN 60-2410  
TEN 60-2411  
TEN 60-2412  
TEN 60-2413  
TEN 60-2415  
TEN 60-4810  
TEN 60-4811  
TEN 60-4812  
TEN 60-4813  
TEN 60-4815  
3.3 VDC  
5.0 VDC  
12 VDC  
15 VDC  
24 VDC  
3.3 VDC  
5.0 VDC  
12 VDC  
15 VDC  
24 VDC  
14.0 A  
12.0 A  
5.0 A  
4.0 A  
2.5 A  
14.0 A  
12.0 A  
5.0 A  
4.0 A  
2.5 A  
89 %  
90 %  
90 %  
90 %  
89 %  
89 %  
90 %  
90 %  
90 %  
89 %  
18 – 36 VDC  
(24 VDC nominal)  
36 – 75 VDC  
(48 VDC nominal)  
http://www.tracopower.com  
Page 1 of 4  
DC/DC Converters  
TEN 60  
60 Watt  
Input Specifications  
Input current at no load  
(nominal input 24/48 Vin)  
3.3 V output models: 100 / 80 mA typ.  
5.0 V output models: 130 / 90 mA typ.  
12 V, 15 V & 24 V output models: 50 / 30 mA typ.  
Input current at full load  
(nominal input 24/48 Vin)  
3.3 V output models: 2260 / 1140 mA typ.  
5.0 V output models: 2940 / 1450 mA typ.  
12 V & 15 V output models: 2900 / 1450 mA typ.  
24 V output models: 2940 / 1470 mA typ.  
Input voltage variation (dv/dt)  
Start-up voltage  
5 V/ms, max.  
(complies with ETS300 132 part 4.4)  
24 Vin models: 17 VDC (or lower)  
48 Vin models: 34 VDC (or lower)  
Under voltage shut down (lock-out circuit)  
Surge voltage (100 msec. max.)  
Conducted noise (input)  
24 Vin models: 15 VDC typ.  
48 Vin models: 32 VDC typ.  
24 Vin models: 50 V  
48 Vin models: 100 V  
EN 55022 level A, FCC part 15, level A with  
external capacitor, see application note:  
www.tracopower.com/overview/ten60  
ESD (input)  
EN 61000-4-2, perf. criteria A  
EN 61000-4-4, perf. criteria A  
EN 61000-4-5, perf. criteria A  
Fast transient (input)  
Surge (input)  
Output Specifications  
Voltage set accuracy  
1 %  
Output voltage adjustment  
10 %  
Regulation  
– Input variation Vin min. to Vin max.  
– Load variation 0 – 100 %  
0.2 % max.  
0.5 % max.  
Temperature coefficient  
0.02 %/K max.  
Ripple and noise (20 MHz Bandwidth)  
3.3 V & 5 V output models: 75 mVpk-pk max.  
12 V & 15 V output models: 100 mVpk-pk max.  
24 V output models: 200 mVpk-pk max.  
Start up time (nominal Vin and constant resistive load)  
Transient response time (25% load change)  
Short circuit protection  
20 ms typ.  
250 µs typ.  
indefinite (automatic recovery)  
Over load protection  
150 % of Iout max typ.  
not required  
Minimum Load  
Thermal shutdown  
at +110°C typ  
Over voltage protection  
3.3 V output models: 3.7 V  
5 V output models: 5.6 V  
12 V output models: 13.8 V  
15 V output models: 16.8 V  
24 V output models: 30.0 V  
Capacitive load  
3.3 V output models: 36’000 µF  
5 V output models: 20400 µF  
12 V output models: 3’550 µF  
15 V output models: 2’300 µF  
24 V output models: 885 µFGeneral Specifications  
http://www.tracopower.com  
Page 2 of 4  
DC/DC Converters  
TEN 60  
60 Watt  
General Specifications  
Temperature ranges  
– Operating  
–40°C to +85°C  
– Case temperature  
– Storage  
+110°C max.  
–55°C to +125°C  
Derating  
see application note:  
www.tracopower.com/overview/ten60  
Humidity (non condensing)  
95 % rel H max.  
>400’000 h  
Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign)  
Isolation (Input/Output)  
– Voltage  
1‘600 VDC  
– Capacitance  
– Resistance  
1’500 pF max.  
>1‘000 MOhm  
Remote On/Off  
– On:  
3.0 ... 12 VDC or open circuit.  
– Off:  
– Off idle current:  
0 ... 1.2 VDC or short circuit pin 3 and pin 2  
3.0 mA max.  
Switching frequency (fixed)  
Vibration  
300 kHz typ. (Pulse width modulation PWM)  
10 – 55Hz, 10G, 30 minutes along X,Y,Z  
UL 60950-1, IEC/EN 60950-1  
Safety standards  
Safety approvals  
– Certification documents  
www.tracopower.com/overview/ten60  
Environmental compliance – Reach  
www.tracopower.com/products/reach-declaration.pdf  
RoHS directive 2011/65/EU  
– RoHS  
Physical Specifications  
Casing material  
copper, nickel plated  
none conductive FR4  
epoxy (UL 94V-0-rated)  
60 g (2.1oz)  
Baseplate material  
Potting material  
Weight  
Soldering temperature  
max. 265°C / 10 sec.  
Supporting documents: www.tracopower.com/overview/ten60  
Outline Dimensions  
Pin-Out  
8
Pin  
3
7
1
2
3
4
5
6
7
8
+Vin (Vcc)  
–Vin (GND)  
Remote On/Off  
–Sense  
6
5
Bottom  
view  
2
1
4
+Sense  
45.7  
(1.8)  
+Vout  
5.6  
(0.22)  
–Vout  
50.8  
(2.0)  
10.2  
(0.4)  
Trim  
Dimensions in [mm], () = Inch  
Pin diameter: 1.0 0.05 (0.02 0.002)  
Pin pitch tolerances: 0.35 ( 0.014)  
Case tolerances: 0.5 ( 0.02)  
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.  
http://www.tracopower.com  
Page 3 of 4  
DC/DC Converters  
TEN 60  
60 Watt  
Outline Dimensions  
Heat-sink TEN-HS3  
56.0 (2.2) max.  
Heat-sink  
Thermal pad  
Clamp  
Converter  
17.0 (0.67)  
max.  
Order code: TEN-HS3 (cont.: heat-sink, thermal pad, 2 clamps)  
Material:  
Finish:  
Weight:  
Aluminum  
Anodic treatment (black)  
22 g (0.78oz) (without converter)  
Note:  
The product label on converter has to be removed before  
mounting the heat-sink.  
For volume orders converters will be supplied with heat-  
sinks already mounted. Please contact factory for quota-  
tion.  
Separate heat-sinks are only available for prototypes and  
small quantity orders.  
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com  
Rev. July 11, 2018  
www.tracopower.com  
Page 4 of 4  

相关型号:

TEN8-1210

DC/DC Converter
TRACOPOWER

TEN8-1210

Analog Circuit
XPPOWER

TEN8-1210_08

DC/DC Converters
TRACOPOWER

TEN8-1211

DC/DC Converter
TRACOPOWER

TEN8-1211

Analog Circuit
XPPOWER

TEN8-1212

DC/DC Converter
TRACOPOWER

TEN8-1213

DC/DC Converter
TRACOPOWER

TEN8-1213

Analog Circuit
XPPOWER

TEN8-1221

DC/DC Converter
TRACOPOWER

TEN8-1221

Analog Circuit
XPPOWER

TEN8-1222

DC/DC Converter
TRACOPOWER

TEN8-1223

DC/DC Converter
TRACOPOWER