TEN8-2410WI [TRACOPOWER]
DC/DC Converters; DC / DC转换器![TEN8-2410WI](http://pdffile.icpdf.com/pdf1/p00102/img/icpdf/TEN8-2410WI_546144_icpdf.jpg)
型号: | TEN8-2410WI |
厂家: | ![]() |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:169K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
DC/DC Converters
TEN 8WI Series, 8 Watt
RoHS
compliant
Features
◆ High Power Density in DIP-24 Metal
Package
◆ Ultra wide 4:ꢀ Input Voltage Range
◆ High Efficiency up to 88%
◆ Operating Temperature Range:
-40°C to +85°C
◆ Remote On/Off
◆ Under Voltage Lockout
◆ Shielded Metal Case with insulated
Base plate
◆ Lead free Design, RoHS compliant
◆ 3 Year Product Warranty
The TEN 8WI series is a family of high performance 8W DC/DC converter mod-
ules featuring ultra wide 4:1 input voltage ranges in a DIP-24 package with in-
dustry-standard footprint. A very high efficiency allows an operating temperature
range of –40°C to +85°C. Full SMD-design with exclusive use of ceramic capacitors
guarantees a high reliability and long product lifetime. Further standard features
include remote On/Off, over voltage protection, under voltage lockout and short
circuit protection. Typical applications for these converters are battery operated
equipment, instrumentation, communication and industrial electronics, everywhere
where isolated, tightly regulated voltages are required.
Models
Order code
Input voltage range
Output voltage
Output current max.
Efficiency typ.
TEN 8-24ꢀ0WI
TEN 8-24ꢀꢀWI
TEN 8-24ꢀ2WI
TEN 8-24ꢀ3WI
TEN 8-242ꢀWI
TEN 8-2422WI
TEN 8-2423WI
TEN 8-48ꢀ0WI
TEN 8-48ꢀꢀWI
TEN 8-48ꢀ2WI
TEN 8-48ꢀ3WI
TEN 8-482ꢀWI
TEN 8-4822WI
TEN 8-4823WI
3.3 VDC
5 VDC
2’000 mA
ꢀ’500 mA
665 mA
535 mA
800 mA
335 mA
265 mA
2’000 mA
ꢀ’500 mA
665 mA
535 mA
800 mA
335 mA
265 mA
85 %
87 %
86 %
86 %
84 %
86 %
86 %
85 %
87 %
87 %
88 %
84 %
86 %
87 %
ꢀ2 VDC
ꢀ5 VDC
5 VDC
9 – 36 VDC
(24 VDC nominal)
ꢀ2 VDC
ꢀ5 VDC
3.3 VDC
5 VDC
ꢀ2 VDC
ꢀ5 VDC
5 VDC
ꢀ8 – 75 VDC
(48 VDC nominal)
ꢀ2 VDC
ꢀ5 VDC
http://www.tracopower.com
Page ꢀ of 4
DC/DC Converters
TEN 8WI Series
8 Watt
Input Specifications
Input current (no load)
9–36 Vin, 3.3VDC & 5VDC output models: 40 mA typ.
9–36 Vin other output models: 25 mA typ.
18–75 Vin, 3.3VDC & 5VDC output models: 20 mA typ.
18–75 Vin other output models: 13 mA typ.
Input current (full load)
9–36 Vin models: 410 mA typ
18–75 Vin models: 210 mA typ
Input voltage variation (dv/dt)
Start-up voltage / under voltage lockout
Surge voltage (100 msec. max.)
Conducted noise (input)
5 V/ms, max.
(complies with ETS300 132 part 4.4)
9–36 Vin models: 9.0 VDC / 8.0 VDC (typ.)
18–75 Vin models: 18 VDC / 16 VDC (typ.)
9–36 Vin models: 50 V max..
18–75 Vin models: 100 V max.
EN 55022 level A/B, FCC part 15, level A/B
with external components. See application note:
www.tracopower.com/products/ten8wi_application.pdf
ESD (input)
EN 61000-4-2, Perf. Criteria B
EN 61000-4-4, Perf. Criteria B
EN 61000-4-5, Perf. Criteria B
Fast Transient (input)
Surge (input)
Output Specifications
Voltage set accuracy
1 ꢀ
Regulation
– Input variation Vin min. to Vin max
– Load variation 10 – 100 %
0.2 ꢀ max.
single output models: 0.5 ꢀ max.
dual output models: 1 ꢀ max.
– Load cross variation 25 % / 100 %
5 ꢀ max.
Temperature coefficient
0.02 ꢀ /K
Ripple and noise (20 MHz Bandwidth)
50 mVpk-pk max.
Start up time
(constant resistive load)
– Power On
– Remote On
450 ms typ.
5 ms max.
Transient Response (25% load step change)
Short circuit protection
250 µs typ.
indefinite (automatic recovery)
150ꢀ of Iout max. typ.
Over load protection
Over voltage protection
3.3 V output: 3.9 V
5 V output: 6.2 V
12 V output: 15 V
15 V output: 18 V
Capacitive load
tba
Temperature ranges
– Operating
–40 °C ... +85 °C
– Case temperature
– Storage
+100 °C max.
–55 °C ... +125 °C
Derating
see graph below
Humidity (non condensing)
95 ꢀ rel. H max.
Reliability, calculated MTBF (MIL-HDBK-217 F)
1 Mio. h @ +25°C
1‘500 VDC
Isolation voltage (60 sec)
Isolation resistance
Isolation capacity
– Input / Output
– Input / Output
– Input / Output
> 1‘000 M Ohm
300 pF max.
Switching frequency
300 kHz typ. (pulse width modulation PWM)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TEN 8WI Series
8 Watt
General Specifications
Vibration
10-55Hz, 10G, 30 minutes along X,Y,Z
UL/cUL 60950-1, IEC/EN 60950-1
UL/cUL File tba
Safety standards
Safety approvals
Remote On/Off
– On:
3.5 ... 12 VDC or open circuit
– Off:
– Off idle current:
0 ... 1.2 VDC or short circuit pin 1 and pin 2/3
2.5 mA
Application notes can be downloaded under:
www.tracopower.com/products/ten8wi_application.pdf
Note ꢀ:
In order to meet conducted emissions EN55022-A an aluminium electrolytic capacitor (low ESR) has to be installed between +Vin and
-Vin. The capacitor should be capable to handle 0.5A ripple current.
Power Derating
Natural convection
100
Forced cooling with 500 LFM
80
60
40
20
0
-40
-20
0
20
40
60
80
100
Ambient Temperature [°C]
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TEN 8WI Series
8 Watt
Physical Specifications
Case material
copper, nickel plated
Baseplate material
Potting material
non conductive FR4
epoxy (UL94V-0 rated)
18 g (0.60 oz)
Weight
Soldering temperature
max. 265 °C / 10 sec.
Outline Dimensions
Pin-Out
Pin
ꢀ
Single
Dual
Remote On/Off Remote On/Off
1
2
23
22
2
–Vin (GND)
–Vin (GND)
No con.
–Vin (GND)
–Vin (GND)
Common
–Vout
3
3
9
ꢀꢀ
ꢀ4
ꢀ6
22
23
No con.
+Vout
+Vout
9
16
14
–Vout
Common
+Vin (Vcc)
+Vin (Vcc)
11
+Vin (Vcc)
+Vin (Vcc)
2.4
(0.1)
15.24
(0.6)
Insulated Baseplate
10.2
(0.4)
3.8
(0.15)
20.3
(0.8)
Dimensions in [mm], () = Inch
Pin diameter ø 0.5 0.05 (0.02 0.002)
Tolerances 0.5 (0.02)
Pin pich tolerances 0.35 (0.014)
Specifications can be changed any time without notice
Rev. 08/07
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明