TEP100-4812WIR [TRACOPOWER]
DC/DC Converters;
| 型号： | TEP100-4812WIR |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converters |
| 文件： | 总5页 (文件大小：705K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converters
TEP 100WIR Series, 100 Watt
Features
◆ꢀCompact metal package
◆ Ultra wide 4:1 input voltage ranges
9–36, 18–75, 43–160 VDC
◆ EN 50155 approval for railway
applications
◆ꢀVery high efficiency up to 93%
◆ꢀNo minimum load
◆ꢀSoft start
(Models pictured with optional heatsink)
◆ꢀAdjustable output voltage +10/-20%
◆ꢀSense line
The TEP 100WIR Series is a family of isolated high performance dc-dc converter
modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed
industry standard half brick package.
A very high efficiency allows full power operation without forced air cooling at 60°C
This temperature can be increased to 70°C with optional mounted heatsink or up
to 85°C when mounted on an iron base plate. The very wide input voltage range
and reverse input voltage protection make these converters interesting solution for
battery operated systems. Typical applications are in telecom/datacom, industry
control and railway systems for on board power distribution.
◆ꢀRemote On/Off input
◆ꢀUnder voltage lock-out circuit
◆ꢀReverse input voltage protection
◆ꢀOver temperature protection
◆ꢀOptional heatsink
◆ꢀOptional as chassis mount models with
screw terminal block and EMI Filter
These series is available in many optional designs on demand --> see options.
◆ꢀ3-year product warranty
Standard Models
Order code
Input voltage
Output voltage
Output current max.
Efficiency typ.
TEP 100-2411WIR
TEP 100-2412WIR
TEP 100-2415WIR
TEP 100-2416WIR
TEP 100-2418WIR
TEP 100-4812WIR
TEP 100-4815WIR
TEP 100-4816WIR
TEP 100-4818WIR
TEP 100-7212WIR
TEP 100-7215WIR
TEP 100-7216WIR
TEP 100-7218WIR
5 VDC
12 VDC
24 VDC
28 VDC
48 VDC
12 VDC
24 VDC
28 VDC
48 VDC
12 VDC
24 VDC
28 VDC
48 VDC
20 A
8.4 A
4.2 A
3.6 A
2.1 A
8.4 A
4.2 A
3.6 A
2.1 A
8.4 A
4.2 A
3.6 A
2.1 A
93 %
90 %
90 %
90 %
90 %
90 %
90 %
92 %
91 %
90 %
90 %
90 %
91 %
9 – 36 VDC
(24 VDC nominal)
18 – 75 VDC
(48 VDC nominal)
43 – 160 VDC
(110 VDC nominal)
Options
Heat-sink for standard version (incl. mounting screws and thermal pad)
Din-rail mounting kit for chassis mount models (incl. mounting screws)
Common mode chokes for filter proposals to meet EN55032 class A/B --> see application note
Models with 3.3 VDC/~ 25 A or 5.0 VDC/~ 20 A or 15 VDC/~ 6.7 A output
Chassis mount models with screw terminal block
TEP-HS1
TEP-MK1
TCK-xxx
on demand
Chassis mount models with screw terminal block and input filter to meet EN 55032 class A
Negative (passive = Off) Remote On/Off function (standard is passive = On)
http://www.tracopower.com
Page 1 of 5
DC/DC Converters
TEP 100WIR Series
100 Watt
Input Specifications
Input current at no load (nominal input voltage)
24 Vin models: 25 mA typ.
48 Vin models: 20 mA typ.
110 Vin models: 10 mA typ.
Start-up voltage
24 Vin models: 9.0 VDC max.
48 Vin models: 18 VDC max.
110 Vin models: 43 VDC max.
Under voltage shut down (lock-out circuit)
Surge voltage (1 sec. max.)
24 Vin models: 7.3 – 8.1 VDC
48 Vin models: 15.5 – 16.3 VDC
110 Vin models: 33.0 – 36.0 VDC
24 Vin models: 50 VDC
48 Vin models: 100 VDC
110 Vin models: 185 VDC
Conducted noise
EMC immunity
EN 55032 class A/B with external components
see application note
EN 50121-3-2
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
– ESD (electrostatic discharge)
– Radiated immunity
– Fast transient / surge (with external input capacitor)
EN 61000-4-3, 20 V/m, perf. criteria A
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 2 kV perf. criteria A
24 / 48 Vin models: 2 chemi-con KY 220 µF, 100 V, ESR 48 mOhm
110 Vin models: 2 chemi-con KXJ 150 µF, 250 V
EN 61000-4-6, 10 Vrms, perf. criteria A
– Conducted immunity
Reverse voltage protection
parallel diode
Recommended input fuse (slow blow)
24 Vin models: 20 A
48 / 110 Vin models: 10 A
Output Specifications
Voltage set accuracy (at full load, nominal input)
1 %
Output voltage adjustment
+10 % / –20 % by external resistor
see application note
Regulation
– Input variation Vin min. to Vin max.
– Load variation (0 – 100%)
0.1 % max.
0.1 % max.
Temperature coefficient
Minimum load
0.02 %/K
not required
Remote sense
10 % max. of Vout nom.
(trim up value to subtract)
Ripple and noise (20 MHz bandwidth)
5 VDC model: 75 mVp-p typ.
12 VDC models: 100 mVp-p typ.
24 / 28 VDC models: 200 mVp-p typ.
48 VDC models: 300 mVp-p typ.
Start up time (nominal Vin and constant resistive load)
Transient response (25% load step change)
Output current limitation
75 ms typ. (at power On or remote On)
250 µs max.
at 120 – 150 % of Iout max.
at 115 – 130 % of Vout nom.
continuous, automatic recovery.
Over voltage protection
Short circuit protection
Max. capacitive load
5 VDC model: 40‘000 µF
12 VDC models: 7‘000 µF
24 VDC models: 1‘750 µF
28 VDC models: 1‘280 µF
48 VDC models: 430 µF
http://www.tracopower.com
Page 2 of 5
DC/DC Converters
TEP 100WIR Series
100 Watt
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
–40°C to +75°C (with derating)
+115°C max.
–55°C to +125°C
Thermal impedance
Power Derating
– without heat-sink
– with heat-sink
6.7°C/W
4.7°C/W
depending on installation!
– without heat-sink
3.3 %/K above +55°C
– with heat-sink
4.0 %/K above +65°C
– with iron base plate (19” x 3.5” x 0.063”)
6.7 %/K above +85°C
please refer to application note for temperature
measure point that should not exceed 115°C.
Over temperature protection
at +120°C
Thermal shock, mechanical shock & vibration
EN 61373, MIL-STD-810F
– Test conditions
www.tracopower.com/products/mil810.pdf
Humidity (non condensing)
95 % rel H max.
400‘000 h
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60sec.)
– Input/Output
– Input/ Case
– Input/Ouput
– Input/Case
110 Vin models: 3’000 VDC (reinforced insulation)
1‘500 VDC
other models: 2‘250 VDC (basic insulation)
1‘600 VDC
Isolation capacitance
Isolation resistance
Switching frequency
– Input/Output
2500 pF max.
>1 GOhm min.
– Input/Output (500 VDC)
24 / 48 Vin models: 250 kHz typ. (pulse width modulation)
110 Vin models: 300 kHz typ. (pulse width modulation)
Safety standards
– Railway immunity
EN 50155,
– UL online certification E188913, QQGQ2
UL 60950-1 2nd edition + AM1
IEC/EN 60950-1
– Certification documents
– positive logic (standard)
www.tracopower.com/overview/tep100wir
Remote On/Off
– On: 3 to 12 VDC or open circuit
– Off: 0 to 1.2 VDC or short circuit pin 1 and 3
– On: 0 to 1.2 VDC or short circuit pin 1 and 3
– Off: 3 to 12 VDC or open circuit
3 mA
– negative logic (option)
– Off idle current:
Environmental compliance – Reach
www.tracopower.com/info/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
– Flammability identified acc. EN 45545-2
www.tracopower.com/info/en45545-declaration.pdf
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 5
DC/DC Converters
TEP 100WIR Series
100 Watt
General Specifications
Casing material
24 / 48 Vin models: metal
110 Vin models: aluminium base-plate with plastic case
Potting material
Base material
silicone (UL94V-0 rated)
FR4
Dimensions
TEP 100WIR module
4 x M3 THD
(trough hole)
Pin-Out
Pin
1
2
5
1
2
3
4
5
6
7
8
9
– Vin
Case
6
7
8
Bottom view
Remote On/Off
+ Vin
3
4
– Vout
9
– Sense*
Trim
+ Sense*
+ Vout
0.19 (4.8)
1.90 (48.26)
2.28 (57.9)
Weight: 105 g (3.70oz)
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
Pin diameter pin 5 & 9: 0.08 (2.0)
Pin diameter other pins: 0.04 (1.0)
TEP-HS1 Heatsink (pictured with heatsink mounted)
2.28 (57.9)
Order code: TEP-HS1
Includes heatsink with termal pad and mounting screws
To order modules with mounted heatsink ask factory.
Weight: 142 g (5.01oz)
Top view
(Heatsink + Converter)
Dimensions in Inch, () = mm
Tolerances 0.02 ( 0.5)
Pin pich tolerances 0.01 ( 0.25)
Mounting hole pich tolerances 0.01 ( 0.25)
http://www.tracopower.com
Page 4 of 5
DC/DC Converters
TEP 100WIR Series
100 Watt
Options (on demand)
Chassis mount models with screw terminal block
Chassis mount models with screw terminal block and input filter to meet EN 555032 class A
TEP-MK1 DIN-rail clip for chassis mount models
1.33(33.8)
1.53(38.8)
1.87(47.5)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. March 7. 2018
www.tracopower.com
Page 5 of 5
相关型号：
TEP100-4813
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-4815
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-4815WIR
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-4816
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-4816WIR
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-4818
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-4818WIR
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-7212WIR
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-7215WIR
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-7216WIR
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP100-7218WIR
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
TEP1001210
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
©2020 ICPDF网 联系我们和版权申明