TEP1002413 [TRACOPOWER]
DC/DC Converters;
| 型号： | TEP1002413 |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converters |
| 文件： | 总6页 (文件大小：995K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converters
TEP 100 Series, 100 Watt
Features
◆ꢀRugged, compact metal case
UL 60950-1
◆ꢀEasy chassis mount
◆ꢀScrew terminal adaptor available
for easy connection
◆ꢀWide 2:1 input voltage range
◆ꢀFull load operation up to 60°C with
convection cooling
◆ꢀSoft start
◆ Under voltage lock-out circuit
◆ꢀReverse input voltage protection
◆ꢀInput protection filter
(Models pictured with chassis mount adaptor and optional heatsink)
◆ꢀ3-year product warranty
optimal thermal management very simple.
The TEP-100 Series is a family of isolated high performance
dc-dc converter modules with ultra-wide 2:1 input voltage ranges
which come in a rugged, sealed metal case.
These converters are suitable for a wide range of applications,
but the product is designed particularly also for industrial appli-
cations where often no PCB mounting is possible but the module
has to be mounted on a chassis. Four threaded M3 inserts in
the module makes chassis mount or attachment of a heatsink for
For easy connection there is also an unique adaptor available with
screw terminals. A very high efficiency allows an operating tempe-
rature up to +60°C with natural convection cooling without power
derating. Further features include output voltage trimming, Remote
On/Off and under voltage lockout. The very wide input voltage range
and reverse input voltage protection make these converters also an
interesting solution for battery operated systems.
Models
Order code*
Input voltage
Output voltage
Output current max.
Efficiency typ.
TEP 100-1210
TEP 100-1211
TEP 100-1212
TEP 100-1213
TEP 100-1215
TEP 100-1216
TEP 100-1218
TEP 100-2410
TEP 100-2411
TEP 100-2412
TEP 100-2413
TEP 100-2415
TEP 100-2416
TEP 100-2418
TEP 100-4810
TEP 100-4811
TEP 100-4812
TEP 100-4813
TEP 100-4815
TEP 100-4816
TEP 100-4818
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
25.0 A
20.0 A
8.4 A
6.7 A
4.2 A
3.6 A
2.1 A
25.0 A
20.0 A
8.4 A
6.7 A
4.2 A
3.6 A
2.1 A
25.0 A
20.0 A
8.4 A
6.7 A
4.2 A
3.6 A
2.1 A
90 %
91 %
91 %
91 %
90 %
90 %
90 %
91 %
93 %
93 %
93 %
92 %
92 %
92 %
91 %
93 %
93 %
93 %
92 %
92 %
92 %
9 – 18 VDC
(12 VDC nominal)
18 – 36 VDC
(24 VDC nominal)
36 – 75 VDC
(48 VDC nominal)
* – add suffix –CM, –CMF for models with chassis mount adaptor, see last page.
– add suffix –N for negative remote control, see page 3 -> Remote On/Off
http://www.tracopower.com
Page 1 of 6
DC/DC Converters
TEP 100 Series
100 Watt
Input Specifications
Input current at no load
12 Vin; 3.3 – 15 VDC models: 210 mA typ.
12 Vin; 24 – 48 VDC models: 100 mA typ.
24 Vin; 3.3 – 15 VDC models: 185 mA typ.
24 Vin; 24 – 48 VDC models: 85 mA typ.
48 Vin; 3.3 – 15 VDC models: 90 mA typ.
48 Vin; 24 – 48 VDC models: 40 mA typ.
Input current at full load
12 Vin models: 9.4 A typ.
24 Vin models: 4.6 A typ.
48 Vin models: 2.3 A typ.
Start-up voltage
12 Vin models: 8.5 VDC (or lower)
24 Vin models: 17.5 VDC (or lower)
48 Vin models: 35.5 VDC (or lower)
Under voltage shut down (lock-out circuit)
Surge voltage (100 msec. max.)
12 Vin models: 7.5 VDC typ.
24 Vin models: 16 VDC typ.
48 Vin models: 34 VDC typ
12 Vin models: 36 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Conducted noise
EN 55022 level A, FCC part 15, level A
(chassis mount option –CFM required)
ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
Radiated immunity
EN 61000-4-3, 10 V/m, perf. criteria A
Fast transient / Surge
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 1 kV perf. criteria A
With external input capacitor e.g. Nippon
chemi-con KY 200 µF, 100 V, ESR 48 mOhm
or with chassis mount option –CFM
Conducted immunity
EN 61000-4-6, 10 Vrms, perf. criteria A
parallel diode
Reverse voltage protection
Recommended input fuse (slow blow)
12 Vin models: 15 A
24 Vin models: 10 A
48 Vin models: 5 A
Output Specifications
Voltage set accuracy
1 %
Output voltage adjustment
+10 % / –20 % by external resistor
see application note:
Regulation
– Input variation Vin min. to Vin max.
0.2 % max.
– Load variation (0 – 100 %) 3.3 – 15 VDC models: 0.3 % max.
24 – 48 VDC models: 0.3 % max.
Temperature coefficient
Minimum load
0.02 %/K
not required
Remote sense
10 % max. of Vout nom.
(including trim up value)
Ripple and noise (20 MHz Bandwidth)
3.3 & 5 VDC models: 75 mVpk-pk max.
12 & 15 VDC models: 100 mVpk-pk max.
24 & 28 VDC models: 200 mVpk-pk max.
48 VDC models: 300 mVpk-pk max.
http://www.tracopower.com
Page 2 of 6
DC/DC Converters
TEP 100 Series
100 Watt
Output Specifications
Start up time (nominal Vin and constant resistive load)
Transient response (25% load step change)
Output current limitation
25 ms typ. (at power On or remote On)
200 µs typ.
at 110 -140 % of Iout max.
at 115 -130 % of Vout nom.
indefinite, automatic recovery
Over voltage protection
Short circuit protection
Capacitive load
3.3 & 5 VDC models: 40‘000 µF max.
12 VDC models: 7‘000 µF max.
15 VDC models: 4‘460 µF max.
24 VDC models: 1‘750 µF max.
28 VDC models: 1‘280 µF max.
48 VDC models: 430 µF max.
General Specifications
Temperature ranges
– Operating
– Case temperature
– Storage
–40°C to +75°C
+105°C max.
–55°C to +125°C
Thermal impedance
– without Heatsink
– with Heatsink
6.7°C/W
4.7°C/W
Derating
See derating graphs page 4
Over temperature protection
Thermal shock
at 115°C
acc. MIL-STD-810F
95 % rel H max.
75‘000 h
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60sec.)
– Input/Output
– Input/Case
2’250 VDC (basic insulation)
1’500 VDC
Isolation capacitance
Isolation resistance
Switching frequency
Safety standards
Safety approvals
Remote On/Off
– Input/Output
2500 pF max.
– Input/Output (500 VDC)
>1 GOhm min.
300 kHz typ. (puls width modulation)
UL 60950-1 , IEC/EN 60950-1
www.ul.com -> certifications -> File e188913
– UL/cUL
– positive logic (standard)
– On: 3 to 12 VDC or open circuit
– Off: 0 to 1.2 VDC or short circuit pin 1 and 3
– On: 0 to 1.2 VDC or short circuit pin 1 and 3
– Off: 3 to 12 VDC or open circuit
3 mA
– negative logic (option -N)
– Off idle current:
Environmental compliance – Reach
www.tracopower.com/products/tep100-reach.pdf
RoHS directive 2011/65/EU
– RoHS
Application note: www.tracopower.com/products/tep100-application.pdf
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 6
DC/DC Converters
TEP 100 Series
100 Watt
Output Power Derating
Models with heatsink
Models without heatsink
24 Vin models: Output 3.3–15 VDC
24 Vin models: Output 3.3–15 VDC
24 Vin models: Output 24–48 VDC
48 Vin models: Output 3.3–15 VDC
48 Vin models: Output 24–48 VDC
24 Vin models: Output 24–48 VDC
48 Vin models: Output 3.3–15 VDC
48 Vin models: Output 24–48 VDC
http://www.tracopower.com
Page 4 of 6
DC/DC Converters
TEP 100 Series
100 Watt
Specifications
Casing material
Potting material
Base material
Vibration
metal
silicone (UL94V-0 rated)
FR4
acc. MIL-STD-810F
Dimensions
TEP 100 module
4 x M3 THD
(trough hole)
1
2
5
6
7
8
Bottom view
3
4
9
Pin-Out
Pin
1
0.19 (4.8)
1.90 (48.26)
2.28 (57.9)
– Vin
Case
Weight: 97 g (3.42 oz)
2
3
Remote On/Off
+ Vin
4
5
6
7
8
9
Pin diameter pin 5 & 9: 0.08 (2.0)
Pin diameter other pins: 0.04 (1.0)
– Vout
– Sense*
Trim
+ Sense*
+ Vout
TEP-HS1 Heatsink (pictured with heatsink mounted)
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
2.28 (57.9)
Order code: TEP-HS1
Includes heatsink with termal pad and mounting screws
For to order modules with mounted heatsink ask factory.
Weight: 135 g (4.76 oz)
Top view
(Heatsink + Converter)
Dimensions in Inch, () = mm
Tolerances: 0.02 ( 0.5)
Pin pich tolerances: 0.01 ( 0.25)
Mounting hole pich tolerances: 0.01 ( 0.25)
http://www.tracopower.com
Page 5 of 6
DC/DC Converters
TEP 100 Series
100 Watt
Chassis Mount Adaptor
TEP 100 module with chassis mount adabtor (suffix –CM or –CMF)
For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection
board (soldered to converter pins)and a chassis mount adaptor.
In addition this Chassis mount option is available with an EMI-filter(see EMI specification)
Suffix –CM: Chassis mount adaptor
Suffix –CMF: Chassis mount adaptor with EMI filter
2.00 (50.8)
2.40 (61.0)
Please note that adaptors cannot be ordered as seperate
items but are factory assembled.
0.14
(3.5)
2.126 (54.0)
Connection
Pin
1
– Vin
Case
2
Weight: –CM 196 g (6.91 oz)
Weight: –CMF 238 g (8.39 oz)
3
Remote On/Off
+ Vin
4
5
– Vout
6
– Sense*
Trim
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
7
8
+ Sense*
+ Vout
9
4 x Ø0.17 (4.3)
Dimensions in Inch, () = mm
Tolerances 0.02 ( 0.5)
Mounting hole pich tolerances 0.01 ( 0.25)
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. October 11. 2013
www.tracopower.com
Page 6 of 6
相关型号：
©2020 ICPDF网 联系我们和版权申明