TEP150-2416WI [TRACOPOWER]
DC/DC Converters; DC / DC转换器型号: | TEP150-2416WI |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:193K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
TEP 150WI Series, 150 Watt
pending
Features
◆ Shielded metal case with screw terminals
◆ Compact dimensions: 98 x 52 x 34 mm
◆ Ultra-wide 4:1 input voltage range
◆ Very high efficiency up to 87%
◆ Constant current output characteristic
◆ Operating temp. range –40°C to +75°C
◆ Reverse input protection
◆ I/O isolation 2250 VDC (basic insulation)
◆ Easy chassis and wall mounting
◆ 3-year product warranty
The TEP-150WI Series is a family of high power density dc-dc converter modules
with ultra-wide 4:1 input voltage range which come in an ultra-compact metal
case with screw terminal connection. Suitable for a wide range of applications, the
TEP-150WI series was particularly designed with industrial applications in mind.
The modules have flanges for easy chassis or wall mounting. A very high efficiency
allows an operating temperature up to +50°C with natural convection cooling. Fur-
ther features include adjustable output voltage with constant current characteristic
for battery charger applications.
Models
Order code*
Input voltage
Output voltage
Output current max.
Efficiency typ.
TEP 150-2412WI
TEP 150-2413WI
TEP 150-2415WI
TEP 150-2416WI
TEP 150-2418WI
TEP 150-4812WI
TEP 150-4813WI
TEP 150-4815WI
TEP 150-4816WI
TEP 150-4818WI
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
12 VDC
15 VDC
24 VDC
28 VDC
48 VDC
12.5 A
10 A
85 %
85 %
86 %
86 %
86 %
86 %
86 %
87 %
87 %
87 %
9 – 36 VDC
(24 VDC nominal)
6.3 A
5.4 A
3.2 A
12.5 A
10 A
18 – 75 VDC
(48 VDC nominal)
6.3 A
5.4 A
3.2 A
* – add suffix –N for negative remote control, see page 3 -> Remote On/Off
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
TEP 150WI Series 150 Watt
Input Specifications
Input current at no load
24 Vin, 12 – 15 VDC models: 80 mA typ.
24 Vin, 24 – 48 VDC models: 95 mA typ.
48 Vin, 12 – 15 VDC models: 60 mA typ.
48 Vin, 24 – 48 VDC models: 75 mA typ.
Input current at full load
24 Vin models: 7.7 A typ.
48 Vin models: 3.8 A typ.
Start-up voltage / under voltage shut down
Surge voltage (100 msec. max.)
Conducted noise (input)
24 Vin models: 8.8 VDC / 8.2 VDC typ.
48 Vin models: 17.6 VDC / 16.5 VDC typ
24 Vin models: 50 V
48 Vin models: 100 V
EN 55022 level A, FCC part 15, level A
without external components
ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
Radiated immunity
EN 61000-4-3, 10 V/m, perf. criteria A
Fast transient / Surge
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 1 kV perf. criteria A
With external input capacitor e.g. Nippon
chemi-con KY 200 µF, 100 V, ESR 48 mOhm
or with chassis mount option –CFM
Conducted immunity
EN 61000-4-3, 10 Vrms, perf. criteria A
parallel diode
Reverse voltage protection
Recommended input fuse (slow blow)
24 Vin models: 15 A
48 Vin models: 10 A
Output Specifications
Voltage set accuracy
1%
Output voltage adjustment
+20 % by external resistor (see table page 3)
Regulation
– Input variation Vin min. to Vin max.
– Load variation 0 – 100 %
0.2 % max.
0.4 % max.
Temperature coefficient
Minimum load
0.02 %/K
not required
Ripple and noise (20 MHz Bandwidth)
5 VDC models: 75 mVpk-pk max.
12 & 15 VDC models: 100 mVpk-pk max.
24 & 28 VDC models: 200 mVpk-pk max.
48 VDC models: 300 mVpk-pk max.
Start up time (nominal Vin and constant resistive load)
Transient response (25% load step change)
Output current limitation
25 ms typ. (at power On or remote On)
200 µs typ.
at 105 -120 % of Iout max.
at 125 -140 % of Vout nom.
indefinite, automatic recovery
t.b.a.
Over voltage protection
Short circuit protection
Capacitive load
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TEP 150WI Series 150 Watt
General Specifications
Temperature ranges
– Operating
–40 °C to +75 °C
– Case temperature
– Storage
+95 °C max.
–55 °C to +125 °C
Thermal impedance
– without Heatsink
– with Heatsink
6.7 °C/W
4.7 °C/W
Derating
2.2 %/K above 50 °C
at 110 °C
Over temperature protection
Thermal shock
acc. MIL-STD-810F
95 % rel H max.
>180‘000 h
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217F, 25°C, ground benign)
Isolation voltage (60sec.)
– Input/Output
– Input/Case
2’250 VDC (basic insulation)
1’500 VDC
Isolation capacity
Isolation resistance
Switching frequency
– Input/Output
2500 pF max.
>1 GOhm min.
– Input/Output (500 VDC)
220 – 330 kHz depending on model
(puls width modulation)
Safety standards
UL 60950-1, IEC 60950-1, EN 60950-1
UL 60950-1, CB- test report
Safety approvals (pending)
Remote On/Off
– positive logic (standard)
– negative logic (option -N)
– Off idle current:
– On: 3 to 12 VDC or open circuit
– Off: 0 to 1.2 VDC or short circuit pin 5 and 3
– On: 0 to 1.2 VDC or short circuit pin 5 and 3
– Off: 3 to 12 VDC or open circuit
3 mA
External output trimming:
Ru
12 VDC
36
15 VDC
39
24 VDC 28 VDC 48 VDC
8
+5 %
39
13
43
15
43
15
+10 %
+15 %
+20 %
12
13
Ru
4.3
5.1
5.6
1.2
5.6
1.2
5.6
1.2
0.62
1.1
9
closest resistor out of the E24 array [kOhm]
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TEP 150WI Series 150 Watt
Physical Specifications
Case material
metal
Potting material
Weight
silicon (UL 94V-0 rated)
300 g (10.6 oz)
Outline Dimensions
52.5 (2.07)
Pin-Out
Pin
1
+ Vin
+ Vin
2
3
– Vin
4
– Vin
1
2
3
4
5
6
7
8
9
5
Remote On/Off
+ Vout
– Vout
6
65.0 (2.56)
59.0 (2.07)
7
8
Trim
9
Trim
4 x r2
(0.08)
Dimensions in [mm], () = Inch
Mounting slot tolerance: 0.25 ( 0.001)
Case tolerances: 0.5 ( 0.02)
Rev. 12/08
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明