TEP75-4816WI [TRACOPOWER]
DC/DC Converters; DC / DC转换器
| 型号： | TEP75-4816WI |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converters |
| 文件： | 总6页 (文件大小：858K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converters
TEP 75WI Series, 75 Watt
pending
Features
◆ꢀRugged, compact metal case
◆ꢀEasy chassis mount
◆ꢀScrew terminal adaptor available
for easy connection
◆ꢀUltra wide 4:1 input voltage range
◆ꢀFull load operation up to 60°C with
convection cooling
◆ꢀSoft start
◆ꢀReverse input voltage protection
◆ꢀInput protection filter
◆ꢀ3-year product warranty
(Models pictured with chassis mount adaptor and optional heatsink)
The TEP-75WI Series is a family of isolated high performance dc-dc converter
modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed
metal case.
These converters are suitable for a wide range of applications, but the product is
designed particularly also for industrial applications where often no PCB mounting
is possible but the module has to be mounted on a chassis. Four threaded M3 inserts
in the module makes chassis mount or attachment of a heatsink for optimal thermal
management very simple.
For easy connection there is also an unique adaptor available with screw terminals.
A very high efficiency allows an operating temperature up to +60°C with natural
convection cooling without power derating. Further features include output voltage
trimming, Remote On/Off and under voltage lockout. The very wide input voltage
range and reverse input voltage protection make these converters also an interesting
solution for battery operated systems.
Models
Order code*
Input voltage
Output voltage
5.0 VDC
12 VDC
Output current max.
15.0 A
6.3 A
Efficiency typ.
88 %
TEP 75-2411WI
TEP 75-2412WI
TEP 75-2413WI
TEP 75-2415WI
TEP 75-2416WI
TEP 75-2418WI
TEP 75-4811WI
TEP 75-4812WI
TEP 75-4813WI
TEP 75-4815WI
TEP 75-4816WI
TEP 75-4818WI
88 %
9 – 36 VDC
15 VDC
24 VDC
28 VDC
48 VDC
5.0 VDC
12 VDC
5.0 A
88 %
(24 VDC nominal)
3.2 A
87 %
2.7 A
87 %
1.6 A
87 %
15 A
90 %
6.3 A
89 %
18 – 75 VDC
15 VDC
24 VDC
28 VDC
48 VDC
5.0 A
89 %
(48 VDC nominal)
3.2 A
87 %
2.7 A
87 %
1.6 A
87 %
* – add suffix –CM, –CMF for models with chassis mount adaptor, see last page.
– add suffix –N for negative remote control, see page 3 -> Remote On/Off
http://www.tracopower.com
Page 1 of 6
DC/DC Converters
TEP 75WI Series
75 Watt
Input Specifications
Input current at no load
24 Vin; 5 – 15 VDC models: 185 mA typ.
24 Vin; 24 – 48 VDC models: 85 mA typ.
48 Vin; 5 – 15 VDC models: 90 mA typ.
48 Vin; 24 – 48 VDC models: 50 mA typ.
Input current at full load
24 Vin models: 3600 mA typ. (see Note 1)
48 Vin models: 1800 mA typ.
Start-up voltage / under voltage shut down
Surge voltage (100 msec. max.)
Conducted noise
24 Vin models: 8.5 VDC / 7.5 VDC typ.
48 Vin models: 17.5 VDC / 16 VDC typ.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
EN 55022 level A, FCC part 15, level A
(chassis mount option –CFM required)
ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
Radiated immunity
EN 61000-4-3, 10 V/m, perf. criteria A
Fast transient / Surge
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 1 kV perf. criteria A
With external input capacitor e.g. Nippon
chemi-con KY 200 µF, 100 V, ESR 48 mOhm
or with chassis mount option –CFM
Conducted immunity
EN 61000-4-6, 10 Vrms, perf. criteria A
parallel diode
Reverse voltage protection
Recommended input fuse (slow blow)
24 Vin models: 10 A
48 Vin models: 5 A
Output Specifications
Voltage set accuracy
1 %
Output voltage adjustment
+10 % / –20 % by external resistor
(see table page 3)
Regulation
– Input variation Vin min. to Vin max.
– Load variation (0 – 100 %)
0.2 % max.
5 – 15 VDC models: 0.3 % max.
24 – 48 VDC models: 0.3 % max.
Temperature coefficient
Minimum load
0.02 %/K
not required
Remote sense
10 % max. of Vout nom.
(tim up value to subtract)
Ripple and noise (20 MHz Bandwidth)
5 VDC models: 75 mVpk-pk max.
12 & 15 VDC models: 100 mVpk-pk max.
24 & 28 VDC models: 200 mVpk-pk max.
48 VDC models: 300 mVpk-pk max.
Start up time (nominal Vin and constant resistive load)
Transient response (25 % load step change)
Output current limitation
25 ms typ. (at power On or remote On)
200 µs typ.
at 110 -140 % of Iout max.
at 115 -130 % of Vout nom.
indefinite, automatic recovery
t.b.a.
Over voltage protection
Short circuit protection
Capacitive load
Note 1: For operation at low input voltage an input capacitor 4.7µF/50V X7R MLCC or 68µF/100V, 110mOhm Nippon chemi-con
KY series is recommended for a reliable supply of the pulse current. Capacitor is already include with chassis mount option –CM and
–CFM
http://www.tracopower.com
Page 2 of 6
DC/DC Converters
TEP 75WI Series
75 Watt
General Specifications
Temperature ranges
– Operating
–40°C to +75°C
– Casing temperature
– Storage
+105°C max.
–55°C to +125°C
Thermal impedance
– without Heatsink
– with Heatsink
6.7 °C/W
4.7 °C/W
Derating
See derating graphs page 4
at 115°C
Over temperature protection
Thermal shock
acc. MIL-STD-810F
95 % rel H max.
75‘000 h
Humidity (non condensing)
Reliability, calculated MTBF (MIL-HDBK-217F, @ 25°C, ground benign)
Isolation voltage (60sec.)
– Input/Output
– Input/Case
2’250 VDC (basic insulation)
1’500 VDC
Isolation capacity
– Input/Output
2500 pF max.
Isolation resistance
Switching frequency
Safety standards
– Input/Output (500 VDC)
>1 GOhm min.
300 kHz typ. (puls width modulation)
UL 60950-1 , IEC 60950-1, EN 60950-1
UL 60950-1, CB- test report
Safety approvals (pending)
Remote On/Off
– positive logic (standard)
– negative logic (option -N)
– Off idle current:
– On: 3 to 12 VDC or open circuit
– Off: 0 to 1.2 VDC or short circuit pin 1 and 3
– On: 0 to 1.2 VDC or short circuit pin 1 and 3
– Off: 3 to 12 VDC or open circuit
3 mA
External output trimming:
Ru
5 VDC
62
12 VDC
180
15 VDC
240
24 VDC 28 VDC 48 VDC
Trim up
Trim down
+ 5 %
390
200
470
240
820
430
7
6
+ 10 %
33
91
120
Rd
any output
8.2
Ru
Rd
- 10 %
- 20 %
3.0
closest resistor out of the E24 array [kOhm]
8
7
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 6
DC/DC Converters
TEP 75WI Series
75 Watt
Output Power Derating
Models with heatsink
Models without heatsink
24 Vin models: Output 5–15 VDC
24 Vin models: Output 5–15 VDC
24 Vin models: Output 24–48 VDC
24 Vin models: Output 24–48 VDC
48 Vin models: Output 5–15 VDC
48 Vin models: Output 5–15 VDC
48 Vin models: Output 24–48 VDC
48 Vin models: Output 24–48 VDC
http://www.tracopower.com
Page 4 of 6
DC/DC Converters
TEP 75WI Series
75 Watt
General Specifications
Casing material
Potting material
Base material
metal
silicon (UL94V-0 rated)
FR4
Vibration
acc. MIL-STD-810F
Dimensions
TEP 75 module
4 x M3 THD
(trough hole)
1
2
5
6
7
8
Bottom view
3
4
9
Pin-Out
Pin
1
0.19 (4.8)
1.90 (48.26)
2.28 (57.9)
– Vin
Case
Weight: 97g (3.42 oz)
2
3
Remote On/Off
+ Vin
4
5
6
7
8
9
Pin diameter pin 5 & 9: 0.08 (2.0)
Pin diameter other pins: 0.04 (1.0)
– Vout
– Sense*
Trim
+ Sense*
+ Vout
TEP-HS1 Heatsink (pictured with heatsink mounted)
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
2.28 (57.9)
Order code: TEP-HS1
Includes heatsink with termal pad and mounting screws
To order modules with mounted heatsink ask factory.
Weight: 135g (4.76 oz)
Top view
(Heatsink + Converter)
Dimensions in Inch, () = mm
Tolerances 0.02 (0.5)
Pin pich tolerances 0.01 (0.25)
Mounting hole pich tolerances 0.01 (0.25)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 5 of 6
DC/DC Converters
TEP 75WI Series
75 Watt
Chassis Mount Adaptor
TEP 75 module with chassis mount adabtor (suffix –CM or –CMF)
For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection
board (soldered to converter pins)and a chassis mount adaptor.
In addition this Chassis mount option is available with an EMI-filter(see EMI specification)
Suffix –CM: Chassis mount adaptor
Suffix –CMF: Chassis mount adaptor with EMI filter
1.90 (48.3)
2.40 (61.0)
Please note that adaptors cannot be ordered as seperate
items but are factory assembled.
0.14
(3.5)
2.126 (54.0)
Connection
Pin
1
2
3
4
5
6
7
8
9
– Vin
Case
Remote On/Off
+ Vin
– Vout
– Sense*
Trim
*Sense line to be connected
to the output either at the
module or at the load under
regard of polarity.
+ Sense*
+ Vout
4 x Ø0.17 (4.3)
Dimensions in Inch, () = mm
Tolerances 0.02 (0.5)
Mounting hole pich tolerances 0.01 (0.25)
Specifications can be changed any time without notice.
Rev. 03/09
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 6 of 6
相关型号：
©2020 ICPDF网 联系我们和版权申明