TES11221 [TRACOPOWER]
DC/DC Converters;型号: | TES11221 |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:312K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
TES 1 Series, 1 Watt
Features
◆ Small SMD package with standard
footprint
◆ I/O isolation 1500 VDC
◆ Single and dual output models
◆ Input voltage 5, 12 and 24 VDC
◆ High efficiency up to 80%
◆ Operating temperature range
–40°C to +85°C
◆ High accuracy of pin co-planarity
◆ Qualified for leadfree reflow solder
With their small footprint these 1Watt DC/DC converters are an ideal and economi-
cal solution for many applications where an isolated voltage is required. Typical ap-
plications are ground loop elimination, noise reduction, voltage isolation in digital
interfaces and voltage conversion in distributed power systems. With a new pack-
age design these converters are qualified for the higher temperatures requested by
lead-free reflow solder processes. For automated SMD production lines the devices
can be supplied in standard tape and reel package.
process according IPC/JEDEC J-STD-020C
◆ Available in tape and reel package
◆ 3-year product warranty
Models
Order code
TES 1-0510
TES 1-0511
TES 1-0519
TES 1-0512
TES 1-0513
TES 1-0521
TES 1-0522
TES 1-0523
TES 1-1211
TES 1-1219
TES 1-1212
TES 1-1213
TES 1-1221
TES 1-1222
TES 1-1223
TES 1-2411
TES 1-2419
TES 1-2412
TES 1-2413
TES 1-2421
TES 1-2422
TES 1-2423
Input voltage
Output voltage
3.3 VDC
5 VDC
Output current max.
300 mA
200 mA
110 mA
85 mA
Efficiency typ.
73 %
78 %
78 %
78 %
79 %
74 %
9 VDC
5 VDC 10%
12 VDC
15 VDC
5 VDC
(nominal 5 VDC)
65 mA
100 mA
40 mA
12 VDC
15 VDC
5 VDC
78 %
78 %
76 %
35 mA
200 mA
110 mA
85 mA
9 VDC
78 %
79 %
80 %
74 %
12 VDC
15 VDC
5 VDC
12 VDC 10%
(nominal 12 VDC)
65 mA
100 mA
40 mA
12 VDC
15 VDC
5 VDC
78 %
79 %
78 %
77 %
77 %
79 %
73 %
78 %
78 %
35 mA
200 mA
110 mA
85 mA
9 VDC
12 VDC
15 VDC
5 VDC
24 VDC 10%
(nominal 24 VDC)
65 mA
100 mA
40 mA
12 VDC
15 VDC
35 mA
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
TES 1 Series
1 Watt
Input Specifications
Input current no load / full load
5 Vin models: 30 mA / 260 mA typ.
12 Vin models: 15 mA / 110 mA typ.
24 Vin models: 8 mA / 55 mA typ.
Surge voltage (1 sec. max.)
5 Vin models:
9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse voltage protection
Input filter
0.3 A max.
internal capacitors
Output Specifications
Voltage set accuracy
– 5 VDC models:
– other models:
2 % at 60 % load
2 % at 100 % load
Voltage balance (dual output models, balanced load)
1 % max.
Regulation
– Input variation
– Load variation
1.2 % / 1 % change Vin
see graphs below
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
120 mVpp max.
0.02 %/K
limited 0.5 sec. max.
33 µF max.
Capacitive load
General Specifications
Temperature ranges
– Operating
– Storage
– Case
–40°C to +85°C
–55°C to +125°C
–105°C max.
Derating (convection cooling)
Humidity (non condensing)
4 %/K above +75°C
95 % rel. H max.
>2’000’000 h
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60sec.)
Isolation capacitance
Isolation resistance
– Input/Output
– Input/Output
– Input/Output
1‘500 VDC
40 pF typ.
>1‘000 Mohm
Switching frequency
100 kHz typ. (frequency modulation)
30 %
Frequency change over line and load
Environmental compliance – Reach
www.tracopower.com/products/tes1-reach.pdf
RoHS directive 2002/95/EC
– RoHS
Output voltage variation dependent on load (at nominal input voltage)
5 VDC models:
other models:
+10%
+10%
max.
typ.
min.
max.
0%
0%
typ.
min.
-10%
0
-10%
0
50%
100%
50%
100%
Load
Load
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TES 1 Series
1 Watt
Physical Specifications
Casing material
epoxy molding compound (94V-0 rated)
Weight
single output models: 1.7 g (0.04 oz)
dual output models: 2.0 g (0.05 oz)
Lead-free reflow solder process
Moisture sensivity level (MSL)
as per J-STD-020D.01 (to find at:
www.jedec.org - free registration equired)
level 2 as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Washing process
Packaging
www.tracopower.com/products/smd-wash.pdf
www.tracopower.com/products/tes1-pack.pdf
Application note: www.tracopower.com/products/tes1-application.pdf
Outline and Solder Pad Dimensions
TES 1 Single Output Models
8.0 (0.31)
S
Pin-Out
Pin
1
Single
–Vin (GND)
+Vin (Vcc)
–Vout
0-4°
3.04 ꢀ.54
5.08
(0.ꢀ0)
1.5 (0.06)
(0.1ꢀ)
(0.10)
0.1
5.5 (0.ꢀ16)
5.5 (0.ꢀ16)
13.7 (0.54)
11.0 0.ꢀ (0.43 0.008)
3
7
0.6
(0.0ꢀ)
8
+Vout
Solder Pad Dimension
1.0 min.
(0.04)
14
*NC
14
8
7
* Pin to be isolated from
circuitry
Top view
1
3
Dimensions in [mm], () = Inch
Pin pitch tolerances: 0.10 ( 0.004)
Other tolerances: 0.25 ( 0.01)
ꢀ.54
(0.10)
5.08
(0.10)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TES 1 Series
1 Watt
Outline and Solder Pad Dimensions
TES 1 Dual Output Models
8.0 (0.31)
S
Pin-Out
3.04 2.54
5.08
(0.20)
2.54
(0.10)
0-4°
1.5 (0.06)
5.5 (0.216)
11.0 0.2 (0.43 0.008)
Pin
1
Dual
–Vin (GND)
+Vin (Vcc)
Common
–Vout
(0.12)
(0.10)
0.1
5.5 (0.216)
16.3 (0.64)
3
7
0.6
9
1.0 min.
(0.04)
12
18
+Vout
18
12
*NC
Top view
* Pin to be isolated from
circuitry
1
3
7
9
2.54
(0.10)
5.08
(0.10)
2.54
(0.10)
Dimensions in [mm], () = Inch
Pin pitch tolerances: 0.10 ( 0.004)
Other tolerances: 0.25 ( 0.01)
Specifications can be changed any time without notice.
Rev. 07/12
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明