TES21211H [TRACOPOWER]
DC/DC Converters;
| 型号： | TES21211H |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converters |
| 文件： | 总4页 (文件大小：294K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converters
TES 2H Series, 2 Watt
Features
◆ Small SMD package with standard
footprint
◆ I/O isolation voltage 1500 VDC
◆ Single and dual output models
◆ Input voltage 5, 12 and 24 VDC
◆ High efficiency up to 80 ꢀ
◆ Operating temperature range
–40 to +85°C
◆ High accuracy of pin co-planarity
◆ Qualified for leadfree reflow solder
process according IPC/JEDEC J-STD-020D
◆ Available in tape and reel package
◆ 3-year product warranty
With their small footprint these 2 Watt DC/DC converters are an ideal and eco-
nomical solution for many applications where an isolated voltage is required. Typi-
cal applications are ground loop elimination, noise reduction, voltage isolation in
digital interfaces and voltage conversion in distributed power systems. With a new
package design these converters are qualified for the higher temperatures request-
ed by lead-free reflow solder processes. For automated SMD production lines the
devices can be supplied in standard tape and reel package.
Models
Ordercode
TES 2-0510H
TES 2-0511H
TES 2-0512H
TES 2-0521H
TES 2-0522H
TES 2-0523H
TES 2-1210H
TES 2-1211H
TES 2-1212H
TES 2-1222H
TES 2-1223H
TES 2-2410H
TES 2-2411H
TES 2-2412H
TES 2-2422H
TES 2-2423H
Input voltage
Output voltage
3.3 VDC
5 VDC
Output current max.
500 mA
400 mA
165 mA
±200 mA
±±3 mA
±66 mA
500 mA
400 mA
165 mA
±±3 mA
±66 mA
500 mA
400 mA
165 mA
±±3 mA
±66 mA
Efficiency typ.
70 %
73 %
5 VDC 10ꢀ
12 VDC
±5 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
77 %
(5 VDC nominal)
74 %
76 %
76 %
72 %
75 %
12 VDC 10ꢀ
12 VDC
±12 VDC
±15 VDC
3.3 VDC
5 VDC
79 %
(12 VDC nominal)
±0 %
±0 %
72 %
75 %
24 VDC 10ꢀ
12 VDC
±12 VDC
±15 VDC
79 %
(24 VDC nominal)
79 %
79 %
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
TES 2H Series
2 Watt
Input Specifications
Input current no load / full load
5 Vin; 3.3 VDC model: 60 mA / 470 mA typ.
5 Vin; other models: 60 mA / 540 mA typ.
12 Vin; 3.3 VDC model: 30 mA / 190 mA typ.
12 Vin; other models: 30 mA / 210 mA typ.
24 Vin; 3.3 VDC model: 15 mA / 95 mA typ.
24 Vin; other models: 15 mA / 110 mA typ.
Surge voltage (1 sec. max.)
5 Vin models:
9 V max.
12 Vin models: 1± V max.
24 Vin models: 30 V max.
Reverse voltage protection
Input filter
0.3 A max.
internal capacitor
Output Specifications
Voltage set accuracy
see graphs below
Voltage balance (dual output models, balanced load)
1 % max.
Regulation
– Input variation
– Load variation
1.2 % / 1 % change Vin
see graphs below
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Short circuit protection
120 mVpp max.
±0.02 %/K max.
limited 0.5 sec. max.
Capacitive load
3.3 & 5.0 VDC models: 47 µF max.
12 & 5 VDC models: 10 µF max. (each output)
12 & 15 VDC models: 4.7 µF max. (each output)
General Specifications
Temperature ranges
– Operating
– Storage
– Case
–40°C to +±5°C
–40°C to +125°C
95°C max.
Derating (convection cooling)
Humidity (non condensing)
4 %/K above 75°C
95 % rel. H max.
Reliability, calculated MTTF (MIL-HDBK-217F, @ +25°C, ground benign)
I/O-isolation voltage (60 sec)
>2’000’000 h
1500 VDC
I/O-isolation capacity (100 kHz, 1 V)
I/O-isolation resistance (500 VDC)
60 pF typ.
>10 Gohm
Switching frequency
50 to 120 kHz (depending on load)
Output voltage variation dependent on load (at nominal input voltage)
3.3 & 5.0 VDC models:
other models:
+20%
+15%
+10%
+5%
0%
+20%
+15%
+10%
+5%
0%
max.
max.
typ.
min.
typ.
min.
-5%
-5%
-10%
-10%
0
0
20%
40%
60%
80% 100%
20%
40%
60%
80% 100%
Output Load
Output Load
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TES 2H Series
2 Watt
Physical Specifications
Casing material
plastic (UL94V-0 rated)
single output models: 1.5 g (0.05 oz)
dual output models: 2.2 g (0.08 oz)
as per J-STD-020D.01 (to find at:
Weight
Lead-free reflow solder process
Moisture sensivity level (MSL)
www.jedec.org - free registration required)
level 2 as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Washing process
Packaging
www.tracopower.com/products/smd-wash.pdf
www.tracopower.com/products/tes2h-pack.pdf
Application note: www.tracopower.com/products/tes2h-application.pdf
Outline Dimensions
Single Output Models
Pin-Out
Pin
1
Single
–Vin (GND)
+Vin (Vcc)
–Vout
S
2
0-4°
3.04 2.54
5.08
1.5 (0.06)
4
(0.12)
(0.10)
(0.20)
6.15 (0.24)
6.15 (0.24)
12.3 (0.48)
0.25
5
+Vout
8
No con.
No con. = Pin to be
isolated from circuitry
1.3 (0.04)
8
1
5
4
Solder Pad
Dimensions in [mm], () = Inch
Pin pitch tolerances: 0.13 ( 0.005)
Other tolerances: 0.25 ( 0.01)
2
0.6 (0.02)
13.7 (0.54)
5.08
2.54
(0.20)
(0.64)
Specifications can be changed any time without notice.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TES 2H Series
2 Watt
Outline Dimensions
Dual Output Models
Pin-Out
Pin
1
Dual
–Vin (GND)
+Vin (Vcc)
Common
–Vout
S
2
0-4°
3.04 2.54
5.08
2.54
1.5 (0.06)
(0.12)
(0.10)
(0.20)
(0.10)
4
6.15 (0.24)
6.15 (0.24)
12.3 (0.48)
0.25
5
7
+Vout
10
No con.
1.3 (0.04)
No con. = Pin to be
isolated from circuitry
10
7
4
Solder Pad
Dimensions in [mm], () = Inch
Pin pitch tolerances: 0.13 ( 0.005)
Other tolerances: 0.25 ( 0.01)
1
2
5
0.6 (0.02)
16.3 (0.64)
5.08
2.54
2.54
(0.20)
(0.64)
(0.64)
Specifications can be changed any time without notice.
Rev. 07/12
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 4 of 4
相关型号：
©2020 ICPDF网 联系我们和版权申明