TES52422WI [TRACOPOWER]

DC/DC Converters;


型号：	TES52422WI
厂家：	TRACO ELECTRONIC AG
描述：	DC/DC Converters
文件：	总3页 (文件大小：268K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DC/DC Converters

TES 5WI Series, 5 Watt

UL 60950-1

pending

Features

◆ꢀCompact SMD package

◆ 33.4 x 25.6 mm footprint

◆ Ultra-wide 4:1 input voltage range

◆ I/O isolation 1500 VDC

◆ꢀOperating temp. range –40°C to +71°C

◆ Short circuit protection

◆ꢀ InputꢀﬁlterꢀtoꢀmeetꢀENꢀ55022,ꢀclassꢀA

◆ꢀꢀRemote On/Off

◆ꢀꢀHigh accuracy of pin co-planarity

◆ꢀ Qualiﬁedꢀforꢀleadfreeꢀreﬂowꢀsolder

process according IPC/JEDEC J-STD-020D

◆ 3-year product warranty

The TES-5WI series is a family of high performance 5W dc/dc-converter modules in

a low proﬁle SMD package with compact dimensions. The 14 modules feature ultra-

wide 4:1 input ranges with tightly regulated output voltage. High efﬁciency allows

an operating temperature range of –40 to +71°C at full load.

Further features are built-in EMI-ﬁlter to meet EN 55022 class A without external

components and remote On/Off control. The products comply with IPC J-STD-020D

and are qualiﬁed for high temperature lead-free reﬂow solder process.

Models

Order code

Input voltage

Output voltage

Output current max.

Efﬁciencyꢀtyp.

TES 5-2410WI

TES 5-2411WI

TES 5-2412WI

TES 5-2413WI

TES 5-2421WI

TES 5-2422WI

TES 5-2423WI

TES 5-4810WI

TES 5-4811WI

TES 5-4812WI

TES 5-4813WI

TES 5-4821WI

TES 5-4822WI

TES 5-4823WI

3.3 VDC

5 VDC

1‘200 mA

1‘000 mA

420 mA

335 mA

500 mA

210 mA

165 mA

1‘200 mA

1‘000 mA

420 mA

335 mA

500 mA

210 mA

165 mA

76 %

80 %

83 %

80 %

83 %

76 %

80 %

83 %

80 %

83 %

12 VDC

15 VDC

5 VDC

9 – 36 VDC

(24 VDC nominal)

12 VDC

15 VDC

3.3 VDC

5 VDC

12 VDC

15 VDC

5 VDC

18 – 75 VDC

(48 VDC nominal)

12 VDC

15 VDC

http://www.tracopower.com

Page 1 of 3

DC/DC Converters

TES 5WI Series

5 Watt

Input Specifications

Input current (full load)

24 V models: 250 mA typ.

48 V models: 125 mA typ.

Input current (no load)

24 V models: 20 mA typ.

48 V models: 10 mA typ.

Start-up voltage / under voltage shut down

Surge voltage (1 sec. max.)

24 V models: 9 VDC / 8 VDC typ.

48 V models: 18 VDC / 16 VDC typ

24 V models: 50 V max.

48 V models: 100 V max.

Reverse voltage protection

Reflected input ripple current

1.0 A max.

24 V models: 10 mA typ.

48 V models: 5 mA typ.

Input filter

EN 55022 class A, FCC part 15, level A

Output Specifications

Voltage set accuracy

2 %

Regulation

– Input variation Vin min. to Vin max.

1.0 % max.

– Load variation 10 – 100 %

single output models: 1.0 % max.

dual output models balanced load: 3.0 % max.

Minimum load

10 % of rated max current (operation at lower

load condition is safe but a higher output ripple

will be experienced)

Temperature coefficient

0.02 %/°C max.

85 mVpk-pk max.

Ripple and noise

Dynamic load response (25% load change)

6 % max. peak variation

500 µS max. response time

Transient response (25% load step change)

Current limitation

200 µs typ.

>115 % of Iout max.

indefinite, automatic recovery

Short circuit protection

Capacitive load

3.3 & 5 VDC models: 2000 µF

12 VDC models: 470 µF

15 VDC models: 330 µF

±5 VDC models:

±12 VDC models:

±15 VDC models:

680 µF

330 µF

220 µF

Remote On/Off

– On:

2.5 to 5.5 V or open circuit

–0.7 to 0.8 V or short circuit pin 3 and pin 1/2

10 mA

– Off:

– Off idle current:

General Specifications

Temperature ranges

– Operating

–40°C to +71°C

+100°C max.

–40°C to +125°C

– Case temperature

– Storage

Humidity (non condensing)

95 % rel H max.

Reliability, calculated MTTF (MIL-HDBK-217F, @+25°C, ground benign)

>1‘000‘000 h

Isolation voltage (60 sec.)

Isolation capacitance

Isolation resistance

Switching frequency

Safety standards

– Input/Output

1‘500 VDC

750 pF max.

>1‘000 Mohm

340 kHz typ. (frequency modulation PFM)

UL 60950-1, IEC/EN 60950-1

Safety approvals

CSA File No. 226037

http://directories.csa-international.org

(entry pending)

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 2 of 3

DC/DC Converters

TES 5WI Series

5 Watt

Physical Specifications

Casing material

non conductive plastic (UL 94V-0 rated)

14 g (0.49 oz)

Package weight

Lead-free reflow solder process

as per J-STD-020D.01 (to find at:

www.jedec.org - free registration required)

Moisture sensivity level (MSL)

level 2 as per J-STD-033B.01 (to find at:

www.jedec.org - free registration required)

Washing process

Packaging

www.tracopower.com/products/smd-wash.pdf

www.tracopower.com/products/tes5wi-pack.pdf

Outline Dimensions

33.4

(1.31)

Detail A

Seating

Plane

Pin-Out

20.6 (0.81)

22.6 (0.89)

Single

Dual

Remote On/Off Remote On/Off

(1.01)

25.6

–Vin (GND)

No con.

+Vout

–Vin (GND)

Common

No con.

–Vout

Detail A

Top View

No con.

+Vout

0.15

No con.

–Vout

No con.

Common

+Vin (Vcc)

No con.

1.5

(0.06)

2.7

(0.11)

2.54

(0.1)

15.24

(0.6)

+Vin (Vcc)

No con.

2 x 2.54

(2 x 0.1)

15.24

(0.6)

3 x 2.54

(3 x 0.1)

Pin Patterns:

2.7

(0.11)

Dimensions in [mm], () = Inch

Tolerances ±0.25 (±0.02)

Pin pich tolerances ±0.13 (±0.005)

1.9 (0.059)

Speciﬁcations can be changed any time without notice.

Rev. 03/11

Jenatschstrasse 1 · CH-8002 Zurich · Switzerland

Page 3 of 3

Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com

相关型号：