THD10-4812 [TRACOPOWER]

DC/DC Converters - THD 10 Series, 10 Watt; DC / DC转换器 - THD 10系列, 10瓦
THD10-4812
型号: THD10-4812
厂家: TRACO ELECTRONIC AG    TRACO ELECTRONIC AG
描述:

DC/DC Converters - THD 10 Series, 10 Watt
DC / DC转换器 - THD 10系列, 10瓦

转换器
文件: 总3页 (文件大小:108K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DC/DC Converters  
THD 10 Series, 10 Watt  
UL 60950  
Features  
Very high Power Density in  
DIL-24 Package  
Wide 2:1 Input Range  
Very high Efficiency up to 87%  
I/O-Isolation 1500V  
Input Filter meets EN55022A without  
ext. Components  
Low Ripple and Noise  
Continuous Short Circuit Protection  
Extended Temp. Range  
-40°C to +85°C  
3 Year Product Warranty  
The THD-10 series is a range of isolated high performance 10W DC/DC converters  
in a low profile DIL-24 package with standard industry pin-out. Other features of  
this product are built-in overvoltage protection and internal EMI-filter to meet EN  
55022, class A. Full SMD-design with exclusive use of ceramic capacitors guaran-  
tees a high reliability and long product lifetime. Typical applications for these con-  
verters are industrial electronics, instrumentation, data communication systems and  
battery operated equipment with limited space available on the PCB.  
Models  
Order code  
THD 10-2409  
THD 10-2410  
THD 10-2411  
THD 10-2412  
THD 10-4809  
THD 10-4810  
THD 10-4811  
THD 10-4812  
Input voltage range  
18 – 36 VDC  
Output voltage  
2.5 VDC  
3.3 VDC  
5.1 VDC  
12 VDC  
Output current max.  
3‘000 mA  
3‘000 mA  
2’000 mA  
835 mA  
Efficiency typ.  
83 %  
85 %  
87 %  
87 %  
2.5 VDC  
3.3 VDC  
5.1 VDC  
12 VDC  
3’000 mA  
3’000 mA  
2’000 mA  
835 mA  
83 %  
85 %  
36 – 75 VDC  
87 %  
87 %  
http://www.tracopower.com  
Page 1 of 3  
DC/DC Converters  
THD 10 Series  
10 Watt  
Input Specifications  
Input current (no load)  
24 Vin models:  
48 Vin models:  
20 mA typ.  
10 mA typ.  
Input current (full load)  
24 Vin; 2.5.Vout models: 380 mA typ.  
24 Vin; other output models: 480 mA typ.  
48 Vin; 2.5.Vout models: 190 mA typ.  
48 Vin; other output models: 240 mA typ.  
Start-up voltage /  
under voltage shut down  
24 Vin models: 18 VDC / 17 VDC  
48 Vin models: 36 VDC / 34 VDC  
Surge voltage  
24 Vin models:  
50 V max.  
(1 sec. max.)  
48 Vin models: 100 V max.  
Reverse voltage protection  
0.5 A max.  
Conducted noise (input)  
EN 55022 level A, FCC part 15, level A  
Output Specifications  
Voltage set accuracy  
Regulation  
±1.2 %  
– Input variation Vin min. to Vin max.  
– Load variation 10 – 100 %  
± 1.0 % max.  
± 1.2 % max. (± 1.5% max. for 2.5 Vout models)  
Ripple and noise (20 MHz Bandwidth)  
Temperature coefficient  
Output current limitation  
Short circuit protection  
85 mVpk-pk max.  
± 0.02 % /K  
>110% of Iout max., constant current  
indefinite (automatic recovery)  
Capacitive load  
single output models: 2’200 µF max.  
12 VDC output models: 820 µF max.  
General Specifications  
Temperature ranges  
– Operating  
– Derating  
– Case temperature  
– Storage  
–40 °C ... +85 °C  
3%/K above 70°C  
+100 °C max.  
–55 °C ... +125 °C  
Humidity (non condensing)  
95 % rel H max.  
Reliability, calculated MTBF (MIL-HDBK-217 F)  
Isolation voltage Input/Output  
Isolation capacity Input/Output  
Isolation resistance Input/Output (500 VDC)  
Switching frequency (fixed)  
>1 Mio. h @ + 25 °C  
1‘500 VDC  
1’200 pF typ  
> 1‘000 M Ohm  
400 kHz typ. (Pulse width modulation PWM)  
Safety standards  
UL/cUL60950, EN 60950, IEC 60950  
compliance up to 60 VDC input voltage  
(SELV limit)  
Safety approvals  
UL/cUL 60950  
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.  
http://www.tracopower.com  
Page 2 of 3  
DC/DC Converters  
THD 10 Series  
10 Watt  
Physical Specifications  
Case material  
steel, nickel plated  
Baseplate material  
Potting material  
non conductive FR4  
silicon rubber TES (UL94V-0 rated)  
17.3 g (0.61 oz)  
Weight  
Soldering temperature  
max. 260 °C / 10 sec.  
Outline Dimensions mm (inches)  
Pin-Out  
23  
22  
2
3
Pin  
2
Single output  
–Vin (GND)  
–Vin (GND)  
No pin  
3
16  
14  
9
9
11  
11  
14  
16  
22  
23  
No con.  
+Vout  
15.24 (0.60)  
20.3 (0.80)  
2.5  
(0.10)  
Insulated Baseplate  
–Vout  
10.2  
(0.16) (0.40)  
4.1  
+Vin (Vcc)  
+Vin (Vcc)  
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)  
Tolerances ±0.25 (0.01)  
Specifications can be changed without notice  
Rev. 03/05  
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland  
Tel. +41 43311 4511 · Fax +41 43311 4545 · info@traco.ch · www.tracopower.com  
Page 3 of 3  

相关型号:

THD10-4812N

DC/DC Converters
TRACOPOWER

THD10-4812WIN

DC/DC Converters
TRACOPOWER

THD10-4813N

DC/DC Converters
TRACOPOWER

THD10-4813WIN

DC/DC Converters
TRACOPOWER

THD10-4815WIN

DC/DC Converters
TRACOPOWER

THD10-4822

DC/DC Converters
TRACOPOWER

THD10-4822N

DC/DC Converters
TRACOPOWER

THD10-4822WIN

DC/DC Converters
TRACOPOWER

THD10-4823

DC/DC Converters
TRACOPOWER

THD10-4823N

DC/DC Converters
TRACOPOWER

THD10-4823WIN

DC/DC Converters
TRACOPOWER

THD10N

DC/DC Converters
TRACOPOWER