THL25-2412WI [TRACOPOWER]

DC/DC Converters;


型号：	THL25-2412WI
厂家：	TRACO ELECTRONIC AG
描述：	DC/DC Converters
文件：	总4页 (文件大小：204K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DC/DC Converters

THL 25WI Series, 25 Watt

Features

Scheme

◆ Highest power density 25W converter!

IEC 60950-1

UL 60950-1

Ultra compact design: 1.0” x 1.0” x 0.4”

◆ Shielded metal case with isolated

baseplate

◆ Ultra wide 4 : 1 input voltage ranges

◆ Very high efﬁciency up to 90%

◆ Output voltage adjustable

◆ Remote On/Off control

◆ Operating temp. range –40°C to +80°C

and up to +85°C with heat-sink

◆ I/O isolation voltage 1500 VDC

◆ 3-year product warranty

The THL 25WI series is the latest generation of dc-dc converter modules with highest

power density. The product achieves 25 Watt output power and comes in a metal

case with small dimensions of only 1.0”x 1.0”x 0.4”.

All models have a wide 4:1 input voltage range and precisely regulated output volt-

ages. High efﬁciency of up to 90% makes this product very reliable and applicable

in temperature ranges of up to +80°C or up to +85°C with optional mounted heat

sink. Typical applications are in mobile equipments, instrumentation, distributed

power architectures in communication and industrial electronics and everywhere

where space on the PCB is critical.

Models

Order code

Input voltage range

Output voltage

3.3 VDC

5.0 VDC

12 VDC

15 VDC

12 VDC

15 VDC

3.3 VDC

5.0 VDC

12 VDC

15 VDC

12 VDC

15 VDC

Output current max.

6000 mA

5000 mA

2090 mA

1670 mA

1040 mA

840 mA

Efﬁciency typ.

87 %

THL 25-2410WI

THL 25-2411WI

THL 25-2412WI

THL 25-2413WI

THL 25-2422WI

THL 25-2423WI

THL 25-4810WI

THL 25-4811WI

THL 25-4812WI

THL 25-4813WI

THL 25-4822WI

THL 25-4823WI

89 %

9 – 36 VDC

90 %

(24 VDC nominal)

89 %

6000 mA

5000 mA

2090 mA

1670 mA

1040 mA

840 mA

88 %

90 %

18 – 75 VDC

90 %

(48 VDC nominal)

89 %

http://www.tracopower.com

Page 1 of 4

DC/DC Converters

THL 25WI Series

25 Watt

Input Specifications

Input current at no load (at nominal input voltage)

24 Vin models: 85 mA typ.

48 Vin models: 45 mA typ.

Recommended input fuse (slow blow)

Start-up voltage

24 Vin models: 2500 mA

48 Vin models: 1250 mA

24 Vin models: 9 VDC (or lower)

48 Vin models: 18 VDC (or lower)

Surge voltage (0.1 sec. max.)

Reflected input ripple current

Conducted noise (input)

24 Vin models: 50 V max.

48 Vin models: 100 V max.

24 Vin models: 50 mAp-p typ.

48 Vin models: 30 mAp-p typ.

EN 55022 class A with external L/C

EN 55022 class B with external filter

see application note

ESD (electrostatic discharge)

EN 61000-4-2, air 8 kV, contact 6 kV,

perf. criteria A

Radiated immunity

EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / surge (with external input capacitor)

EN 61000-4-4, 2 kV, perf. criteria A

EN 61000-4-5, 1 kV perf. criteria A

external input capacitor:

Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm

Conducted immunity

EN 61000-4-6, 10 Vrms, perf. criteria A

Output Specifications

Voltage set accuracy

1 %

Output voltage adj. range

10 % for single output models only.

Trim up via resistor between Trim and -Vout

Trim down via resistor between Trim and +Vout

resistor values see application note

Regulation

– Input variation (Vmin – Vmax)

– Load variation

0.2 % max.

single output models: 0.2 % max. (0 – 100 % load)

dual output models: 1.0 % max. (0 – 100 % balanced load)

dual output models: 5.0 % max. (25 – 100 % asymmetrical load)

–Cross regulation

Minimum load

Start up time

not required

30 ms

Ripple and noise (20 MHz bandwidth)

3.3 & 5.0 VDC models: 100 mVp-p typ.

12 & 15 VDC models: 150 mVp-p typ.

Temperature coefficient

Output current limitation

Short circuit protection

Over voltage protection

Transient recovery time

Transient response deviation

Max. capacitive load

0.02 %/K

at 150 % of Iout max., hiccup

indefinite, hiccup automatic recovery

shutdown at +20% of nominal output

250 µs typ. (25% load step change)

5% max. (25% load step change)

3.3 VDC models: 10’300 µF

5 VDC models: 6’800 µF

12 VDC models: 1’200 µF

15 VDC models: 750 µF

12 VDC models: 680 µF (each output)

15 VDC models: 380 µF (each output)

http://www.tracopower.com

Page 2 of 4

DC/DC Converters

THL 25WI Series

25 Watt

General Specifications

Temperature ranges

– Operating (natural convection 20 LFM)

–40°C to +80°C (with derating)

– Operating with heat sink (natural convection 20 LFM) –40°C to +85°C (with derating)

– Case temperature

– Storage

+105°C max.

–50°C to +125°C

Load derating

(natural convection 20 LFM, – with heat sink

typical values over series)

– without heat sink

2.0 %/K above +55°C

2.5 %/K above +65°C

see application note for particular models

Thermal impedance

– Natural convection

– Natural convection with heat sink

17.6°C/W

14.8°C/W

Humidity (non condensing)

95 % rel H max.

>315’000 h

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)

Isolation voltage (60sec.)

Isolation capacitance

Isolation resistance

Remote On/Off

– Input/Output

1500 VDC

– Input/Output

2000 pF max.

>1000 MOhm

– Input/Output (500 VDC)

– On:

– Off:

– Off idle current:

3.5 ... 15 VDC or open circuit

0 ... 1.2 VDC or short circuit pin 6 and pin 2

3 mA typ.

Switching frequency (fixed)

285 kHz typ. (pulse width modulation PWM)

4‘000 m max. (13‘123 ft) approved

UL/cUL 60950-1, IEC/EN 60950-1

Altitude during operation

Safety standards (designed to meet)

Safety approvals – CSA certificate of compliance

CAN/CSA-C22.2 No 60950-1-07, Am 1:2011

ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011

IEC 60950-1:2005 2nd Ed, Am 1:2009

www.tracopower.com/overview/thl25wi

– CB test certificate

– Certification documents

Environmental compliance – Reach

www.tracopower.com/overview/thl25wi

RoHS directive 2011/65/EU

– RoHS

Physical Specifications

Casing material

Baseplate

aluminium alloy, black anodized coating

non conductive FR4

Potting material

Pin material

epoxy (UL 94V-0 rated)

copper alloy with gold plated subplate

16.5 g (0.58 oz)

Weight

Soldering temperature

max. 260°C / 10sec.

Application note : www.tracopower.com/products/thl25wi-application.pdf

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 3 of 4

DC/DC Converters

THL 25WI Series

25 Watt

Outline Dimensions

7.62

(0.3)

5.08

(0.2)

Pin-Out

Single

Dual

+Vin (Vcc)

–Vin (GND) –Vin (GND)

Bottom view

+Vout

Trim

+Vout

Common

–Vout

10.16 10.16

2.5

(0.1)

6.0

(0.24)

10.2

(0.4)

Remote On/Off

25.4

(1.0)

Dimensions in [mm], () = Inch

Pin diameter ø 1.0 (0.04)

Pin pitch tolerances: 0.25 ( 0.01)

Tolerances: 0.5 ( 0.02)

Heat-Sink (optional)

Order code: THL-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Aluminum

Anodic treatment (black)

4 g (0.14 oz) without converter

Material:

Finish:

Weight:

Thermal impedance after assembling: 15.8 K/W

31.0 (1.22) max.

Heat-sink

Thermal pad

Clamp

Note:

The product label on converter has to be re-

moved before mounting the heat-sink.

For volume orders converters will be sup-

plied with mounted heat-sink. Please contact

factory for quotation.

Converter

17.5 (0.69)

max.

Separate heat-sinks are only available for

prototypes and small quantity orders.

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

Rev. April 07. 2015

www.tracopower.com

Page 4 of 4

相关型号：

THL25-2413

DC/DC Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

TOUCHSTONE

TOUCHSTONE

THL25-4812WI

DC/DC Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

TRACOPOWER