THM10-2410WI [TRACOPOWER]

DC/DC Converters;


型号：	THM10-2410WI
厂家：	TRACO ELECTRONIC AG
描述：	DC/DC Converters
文件：	总3页 (文件大小：187K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DC/DC Converters

THM 10WI Series, 10 Watt

Scheme

Features

ES 60601-1

IEC 606010-1

◆ Ultra wide 4:1 input voltage

◆ I/O isolation 5000 VACrms rated for

250 VACrms working voltage

◆ 2 x MOPP Medical safety according to

AAMI/ANSI ES 60601-1:2005(R) and

IEC/EN 60601-1 3rd edition

◆ Low leakage current <2 µA

◆ Very high efﬁciency up to 89%

◆ Extended operating temperature range

The THM-10WI series is a range of high performance, regulated 10 Watt DC/DC

converters in a DIP-24 plastic package. The reinforced I/O-isolation system com-

plies with the medical safety requirements for MOPP (Means Of Patient Protec-

tion). Together with a wide 4:1 input voltage range, and an internal EMI ﬁlter to

meet EN55022 class A the converters constitute also a reliable solution for many

demanding applications such as transportation systems, industrial control equip-

ments, measurement equipments, and some IGBT driver applications. With A high

efﬁciency of up to 87% and highest grade components the converters can reliably

operate in an ambient temperature range of –40 up to +85°C.

–40°C to 85°C.

◆ Input ﬁlter to meet EN55022 class A

◆ 3-year product warranty

Models

Order code

Input voltage range

Output voltage

Output current max.

Efﬁciency typ.

THM 10-0510WI

THM 10-0511WI

THM 10-0512WI

THM 10-0513WI

THM 10-0515WI

THM 10-0521WI

THM 10-0522WI

THM 10-0523WI

THM 10-2410WI

THM 10-2411WI

THM 10-2412WI

THM 10-2413WI

THM 10-2415WI

THM 10-2421WI

THM 10-2422WI

THM 10-2423WI

THM 10-4810WI

THM 10-4811WI

THM 10-4812WI

THM 10-4813WI

THM 10-4815WI

THM 10-4821WI

THM 10-4822WI

THM 10-4823WI

3.3 VDC

5.0 VDC

12 VDC

15 VDC

24 VDC

5.0 VDC

12 VDC

15 VDC

3.3 VDC

5.0 VDC

12 VDC

15 VDC

24 VDC

5.0 VDC

12 VDC

15 VDC

3.3 VDC

5.0 VDC

12 VDC

15 VDC

24 VDC

5.0 VDC

12 VDC

15 VDC

2500 mA

2000 mA

830 mA

670 mA

416 mA

1000 mA

416 mA

333 mA

2500 mA

2000 mA

830 mA

670 mA

416 mA

1000 mA

416 mA

333 mA

2500 mA

2000 mA

830 mA

670 mA

416 mA

1000 mA

416 mA

333 mA

80.0 %

84.0 %

86.5 %

87.0 %

85.5 %

83.0 %

85.5 %

86.5 %

83.0 %

86.5 %

89.0 %

85.0 %

89.0 %

88.0 %

82.5 %

86.5 %

89.0 %

88.5 %

85.0 %

88.0 %

4.5 – 9 VDC

(5 VDC nominal)

9 – 36 VDC

(24 VDC nominal)

18 – 75 VDC

(48 VDC nominal)

http://www.tracopower.com

Page 1 of 3

DC/DC Converters

THM 10WI Series

10 Watt

Input Specifications

Input current at no load

5 Vin models: 20 mA typ.

24 Vin models: 6 mA typ.

48 Vin models: 4 mA typ.

Start-up voltage / under voltage shut down

5 Vin models: 4.5 VDC / 4.0 VDC typ.

24 Vin models: 9.0 VDC / 8.0 VDC typ.

48 Vin models: 18 VDC / 16 VDC typ.

Surge voltage (1 sec. max.)

5 Vin models: 16 VDC max.

24 Vin models: 50 VDC max.

48 Vin models: 100 VDC max.

Conducted noise

EN 55022 class A, without external components

ESD (electrostatic discharge)

EN 61000-4-2, air 8 kV, contact 6 kV,

perf. criteria A

Radiated immunity

EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / surge (with external input capacitor / diode)

EN 61000-4-4, 2 kV, perf. criteria A

EN 61000-4-5, 2 kV perf. criteria A

– external input capacitor:

5 Vin models: Nippon chemi-con KY 1000 µF/ 25 V and

reverse diode (Vishay V10P45) in parallel

24 Vin models: Nippon chemi-con KY 470 µF/ 50 V

48 Vin models: Nippon chemi-con KY 330 µF/ 100 V

Conducted immunity

EN 61000-4-6, 10 V, perf. criteria A

External input fuse required (recommended values, slow blow type) 5 Vin models: 10 A

24 Vin models: 5 A

48 Vin models: 2.5 A

Output Specifications

Voltage set accuracy

1.0 % max.

Regulation

– Input variation

single output models 0.2 % max.

dual output models 0.5 % max.

single output models: 0.2 % max..

– Load variation 0 – 100 %:

dual output models balanced load: 1.0 % max.

dual output models unbalanced load: 5.0 % max.

Minimum load

not required

30 mS

Start up time

Ripple and noise (20 MHz Bandwidth)

3.3 & 5.0 VDC models: 30 mVp-p typ. with cap. 10µF/25V X7R MLCC

12 & 15 VDC models: 40 mVp-p typ. with cap. 10µF/25V X7R MLCC

24 VDC models: 50 mVp-p typ. with cap. 4.7µF/50V X7R MLCC

Transient response (25% load step change)

Current limitation

250 µs typ.

150 % Iout nominal typ. (hiccup mode)

continuous (automatic recovery)

Short circuit protection

Over voltage protection

3.3 VDC output models: 3.7 – 5.4 VDC

5 VDC output models: 5.6 – 7.0 VDC

12 VDC output models: 13.5 – 19.6 VDC

15 VDC output models: 18.3 – 22.0 VDC

24 VDC output models: 29.1 – 32.5 VDC

Capacitive load

3.3 VDC output models: 3000 µF max.

5 VDC output models: 2500 µF max.

12 VDC output models: 430 µF max.

15 VDC output models: 350 µF max.

24 VDC output models: 125 µF max.

5 VDC output models: 1440 µF max. (each output)

12 VDC output models: 250 µF max. (each output)

15 VDC output models: 180 µF max. (each output)

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 2 of 3

DC/DC Converters

THM 10WI Series

10 Watt

General Specifications

Temperature ranges

– Operating

– Casing

– Storage

–40°C to +90°C (with derating)

+105°C max.

–55°C to +125°C

Derating

3.5 %/K above +70°C

95 % rel H max.

0.02 %/K typ.

5000 m

Humidity (non condensing)

Temperature coefficient

Altitude

Switching frequency

300 kHz 30 kHz. (puls width modulation)

I/O isolation voltage

(50Hz, 60sec.)

– to meet ES/IEC/EN 60601-1

5000 VACrms, rated for 250 VACrms working

voltage, 2 x MOPP

Clearance/creepage

Leakage current

8 mm min.

2 µA max. (at 240 VAC, 60 Hz)

17 pF max. (at 100 KHz, 1 V)

Isolation capacitance

Safety standards

– Input/Output

ANSI/AAMI ES 60601-1:2005/(R)2012,

UL 60601-1, IEC/EN 60601-1 3rd edition

www.tracopower.com/overview/thm10wi

– Certification documents

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)

>3.8 Mio h

Casing material

non conductive plastic (UL 94V-0-rated)

silicone (UL 94V-0-rated)

according to MIL-STD-810F

14.0 g (0.48 oz)

Potting material

Vibration and thermal shock resistance

Weight

Soldering temperature

max. 265°C / 10 sec.

Environmental compliance – Reach

www.tracopower.com/overview/thm10wi

according RoHS directive 2011/65/EU

– RoHS

- The component is not be used in an oxygen rich environment.

- The component is not to be used in conjunction with ﬂammable anaesthetics and agents.

- The component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).

- A modiﬁcation of the component is not allowed.

Outline Dimensions

Standard Pinout

Standard pinning

Optional pinning: suffix -A1

Single

–Vin (GND)

No con.

+Vout

Dual

–Vin (GND)

–Vout

11 12

+Vout

Bottom view

–Vout

+Vin (Vcc)

Common

+Vin (Vcc)

23 22

24 23

31.8 (1.25)

Optional Pinout

Single

+Vin (Vcc)

No pin

Dual

+Vin (Vcc)

Common

No pin

4.5

(0.18)

2.0

(0.08)

–Vout

+Vout

–Vout

2.54

(0.10)

15.24 (0.60)

5.08

(0.20)

2.54

(0.10)

20.32 (0.80)

2x2.54

(2x0.1)

No pin

+Vout

Dimensions in [mm], () = Inch

Tolerances 0.5 ( 0.02)

–Vin (GND)

Pin ø 0.6 0.1 (0.024 0.004)

Pin pich tolerances 0.25 ( 0.01)

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

Rev. October 27. 2015

www.tracopower.com

Page 3 of 3

相关型号：

THM10-2411

DC/DC Converter

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

TRACOPOWER

THM10-2411WI

DC/DC Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

TRACOPOWER

TOUCHSTONE