THN15-4815WI [TRACOPOWER]

DC/DC Converters;
THN15-4815WI
型号: THN15-4815WI
厂家: TRACO ELECTRONIC AG    TRACO ELECTRONIC AG
描述:

DC/DC Converters

文件: 总4页 (文件大小:256K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DC/DC Converters  
THN 15WI Series, 15 Watt  
CB  
Scheme  
Features  
UL 60950-1  
UL 60950-1  
Smallest encapsulated 15W Converter!  
Ultra compact size: 1.0” x 1.0” x 0.4”  
Shielded metal case with isolated  
baseplate  
Ultrawide 4:1 input ranges 9-36 VDC  
or 18-75VDC  
Output voltage Trim  
I/O isolation voltage 1500 VDC  
Very high efficiency up to 87%  
Operating temp. range : –40°C to +85°C  
Remote On/Off control  
The THN-15WI series is the latest generation of high performance dc-dc converter  
modules setting new standards concerning power density. This product with 15W  
comes in a encapsulated, shielded metal package with dimensions of only 1.0”x  
1.0”x 0.4” and occupies 50% (!) less board space.  
Industry standard pinout  
All models have ultra wide 4:1 input voltage range and precisely regulated output  
voltages. Advanced circuit design provides high efficiency up to 87% which allows  
a operating temperature range of –40°C to +85°C (with derating) Further features  
include remote On/Off and trimmable output. Typical applications for these con-  
verters are battery operated equipment, mobile instrumentation, distributed power  
architectures in communication and industrial electronics and everywhere where  
space on PCB is critical.  
3-year product warranty  
Models  
Order code  
Input voltage range  
Output voltage  
3.3 VDC  
5.0 VDC  
5.0 VDC *1  
Output current max.  
4‘000 mA  
3‘000 mA  
3‘000 mA  
1‘300 mA  
1’000 mA  
625 mA  
Efficiency typ.  
86 %  
86 %  
86 %  
87 %  
87 %  
90 %  
85 %  
87 %  
88 %  
91 %  
86 %  
87 %  
87 %  
87 %  
87 %  
91 %  
85 %  
86 %  
87 %  
90 %  
THN 15-2410WI  
THN 15-2411WI  
THN 15-2411WI-A1  
THN 15-2412WI  
THN 15-2413WI  
THN 15-2415WI  
THN 15-2421WI  
THN 15-2422WI  
THN 15-2423WI  
THN 15-2425WI  
THN 15-4810WI  
THN 15-4811WI  
THN 15-4811WI-A1  
THN 15-4812WI  
THN 15-4813WI  
THN 15-4815WI  
THN 15-4821WI  
THN 15-4822WI  
THN 15-4823WI  
THN 15-4825WI  
12 VDC  
15 VDC  
24 VDC  
5 VDC  
12 VDC  
15 VDC  
9 – 36 VDC  
(24 VDC nominal)  
1’500 mA  
625 mA  
500 mA  
24 VDC (48 VDC) *2  
315 mA  
3.3 VDC  
5.0 VDC  
5.0 VDC *1  
12 VDC  
15 VDC  
24 VDC  
5 VDC  
12 VDC  
4‘000 mA  
3‘000 mA  
3‘000 mA  
1‘300 mA  
1’000 mA  
625 mA  
1’500 mA  
625 mA  
500 mA  
18 – 75 VDC  
(48 VDC nominal)  
15 VDC  
24 VDC (48 VDC) *2  
315 mA  
*1 Adjustable output up to 6 VDC  
*2 The outputs can also be used in serial circuit for single 48 VDC operation.  
www.tracopower.com  
Page 1 of 4  
DC/DC Converters  
THN 15WI Series  
15 Watt  
Input Specifications  
Input current at no load  
– 24 Vin  
– 48 Vin  
3.3 Vout models: 45 mA typ.  
5 Vout models: 70 mA typ.  
24 Vout models: 12 mA typ.  
24 Vout models: 15 mA typ.  
other models: 20 mA typ.  
3.3 Vout models: 25 mA typ.  
5 Vout models: 35 mA typ.  
12, 15 & 5 Vout models: 12 mA typ.  
12 Vout models: 15 mA typ.  
15 Vout models: 20 mA typ  
24 & 24 Vout models: 10 mA typ  
Start-up voltage /  
under voltage shut down  
24 Vin models: 9 VDC / 8 VDC  
48 Vin models: 18 VDC / 16 VDC  
Surge voltage  
(100 ms max.)  
24 Vin models: 50 V max.  
48 Vin models: 100 V max.  
Reflected input ripple current  
Conducted noise  
30 mA typ.  
EN 55032 class A and B (with external components)  
– Filter proposal for compling to class A/B  
www.tracopower.com/overview/thn15wi  
ESD (electrostatic discharge)  
EN 61000-4-2, air 8 kV, contact 6 kV,  
perf. criteria A  
Radiated immunity  
EN 61000-4-3, 10 V/m, perf. criteria A  
Fast transient / surge (with external input capacitor)  
EN 61000-4-4, 2 kV, perf. criteria A  
EN 61000-4-5, 1 kV perf. criteria A  
Nippon chemi-con KY 220 µF, 100 V  
– External input capacitor  
Conducted immunity  
EN 61000-4-6, 3 Vrms, perf. criteria A  
Output Specifications  
Voltage set accuracy  
1 %  
Output voltage adjustment range  
5.0 Vout A1 models: –10 to +20 %  
24 Vout models: –10 to +20 %  
all other models: 10 % only for single output models  
– For further information see application note  
– Input variation (Vmin – Vmax) single output models: 0.2 % max.  
dual output models: 0.5 % max.  
single output models: 0.2 % max.  
www.tracopower.com/overview/thn15wi  
Regulation  
– Load variation (0 – 100 %)  
dual output models balanced load: 1.0 % max.  
dual output models unbalanced load (25% /100%): 5.0 % max.  
Minimum load  
not required  
Ripple and noise (20 MHz bandwidth)  
3.3/5.0 Vout models: 75 mVpk-pk with external capacitor  
all other models: 100 mVpk-pk max. with external capacitor  
– For further information see application note  
www.tracopower.com/overview/thn15wi  
Temperature coefficient  
Output current limitation  
Short circuit protection  
Over voltage protection  
0.02 %/K  
typ. 150 % of Iout max., Hiccup  
continuous, automatic recovery  
3.3 Vout models: 3.7 – 5.4 VDC  
5 Vout models: 5.6 – 7.0 VDC  
5 Vout A1 models 6.3 – 7.4 VDC  
12 Vout models: 13.5 – 19.6 VDC  
15 Vout models: 16.8 – 20.5 VDC  
24 Vout models: 29.1 – 32.5 VDC  
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.  
www.tracopower.com  
Page 2 of 4  
DC/DC Converters  
THN 15WI Series  
15 Watt  
Output Specifications (continued)  
Start up time (nominal Vin and constant resistive load)  
Transient response setting time (25% load step change)  
Max. capacitive load  
30 ms typ. (for power on and remote on)  
250 µs typ.  
3.3 Vout models: 12’000 µF  
5 Vout models: 6’000 µF  
12 Vout models: 1’000 µF  
15 Vout models: 660 µF  
24 Vout models: 200 µF  
5 Vout models: 3’000 µF (each output)  
12 Vout models: 520 µF (each output)  
15 Vout models: 330 µF ( output)  
24 Vout models: 100 µF (both output)  
General Specifications  
Temperature ranges  
– Operating  
– Casing  
–40°C to +85°C (with derating)  
+105°C max.  
– Storage  
–55°C to +125°C  
Power derating  
2.2 %/K above 60°C  
Thermal impedance  
– Natural convection  
– Natural convection with heat-sink  
18.2°C/W  
15.8°C/W  
Humidity (non condensing)  
5 % to 95 % rel H max.  
>1.4 Mio. h  
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)  
Isolation voltage (60 s)  
Isolation capacitance  
Isolation resistance  
Remote On/Off  
– Input/Output  
1’600 VDC  
– Input/Output  
1000 pF typ.  
– Input/Output (500 VDC)  
>1’000 MOhm  
– On:  
– Off:  
– Off idle current:  
3.0 ... 15 VDC or open circuit  
0 ... 1.2 VDC or short circuit pin 6 and pin 2  
2.5 mA  
Switching frequency (fixed)  
Vibration and thermal shock  
Safety standards  
400 kHz typ. (pulse width modulation PWM)  
MIL-STD-810F  
UL/cUL 60950-1, EN 60950-1, IEC 60950-1  
www.tracopower.com/overview/thn15wi  
– Certification documents  
Environmental compliance – Reach  
www.tracopower.com/overview/thn15wi  
RoHS directive 2011/65/EU  
– RoHS  
Physical Specifications  
Casing material  
Baseplate  
nickel coated copper  
non conductive FR4  
epoxy (UL 94V-0 rated)  
15 g (0.53oz)  
Potting material  
Weight  
Soldering temperature  
265°C / 10 s max.  
Application note: www.tracopower.com/overview/thn15wi  
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.  
http://www.tracopower.com  
Page 3 of 4  
DC/DC Converters  
THN 15WI Series  
15 Watt  
Outline Dimensions mm (inches)  
7.62  
(0.3)  
5.08  
(0.2)  
Pin-Out  
Pin  
1
Single  
Dual  
+Vin (Vcc)  
1
2
6
+Vin (Vcc)  
2
–Vin (GND) –Vin (GND)  
Bottom view  
4
3
+ Vout  
Trim  
+ Vout  
Common  
–Vout  
3
5
4
5
–Vout  
10.16 10.16  
2.5  
(0.1)  
9.9  
(0.39)  
5.6  
(0.22)  
6
Remote On/Off  
(0.4)  
(0.4)  
25.4  
(1.0)  
*Optional versions:  
Dimensions in [mm], () = Inch  
Pin diameter ø 1.0 (0.04)  
Pin pitch tolerances: 0.25 ( 0.01)  
Tolerances: 0.5 ( 0.02)  
• without remote and trim pins add suffix -B (e.g.THN 15-2412WI-B)  
• without remote pin add suffix -B1 (e.g. THN 15-2413WI-B1)  
• without trim pin add suffix -B2 (e.g. THN 15-4811WI-B2)  
Heat-Sink (Option)  
Order code: THN-HS1  
(cont.: heat-sink, thermal pad, 2 clamps)  
Material:  
Finish:  
Weight:  
Aluminum  
Anodic treatment (black)  
8 g (0.28oz) without converter  
Thermal impedance after assembling: 15.8 K/W  
31.0 (1.22) max.  
Heat-sink  
Thermal pad  
Clamp  
Note:  
The product label on converter has to be re-  
moved before mounting the heat-sink.  
For volume orders converters will be sup-  
plied with heat-sink already mounted. Please  
contact factory for quotation.  
Converter  
16.5 (0.65)  
max.  
Separate heat-sinks are only available for  
prototypes and small quantity orders.  
Dimensions in mm, () = Inch  
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com  
Rev. March 26. 2018  
www.tracopower.com  
Page 4 of 4  

相关型号:

THN15-4815WIR

DC/DC Converter
TRACOPOWER

THN15-4821

DC/DC Converters
TRACOPOWER

THN15-4821N

Internal EN 55032 class A filter
TRACOPOWER

THN15-4821WI

DC/DC Converters
TRACOPOWER

THN15-4821WIR

DC/DC Converter
TRACOPOWER

THN15-4822

DC/DC Converters
TRACOPOWER

THN15-4822N

Internal EN 55032 class A filter
TRACOPOWER

THN15-4822WI

DC/DC Converters
TRACOPOWER

THN15-4822WIR

DC/DC Converter
TRACOPOWER

THN15-4823

DC/DC Converters
TRACOPOWER

THN15-4823N

Internal EN 55032 class A filter
TRACOPOWER

THN15-4823WI

DC/DC Converters
TRACOPOWER