THN20-4810WI [TRACOPOWER]
DC/DC Converters;型号: | THN20-4810WI |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:329K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
THN 20WI Series, 20 Watt
Features
CB
Scheme
◆ Ultra compact size: 1.0” x 1.0” x 0.4”
UL 60950-1
UL 60950-1
◆ Shielded metal case with isolated
baseplate
◆ Ultrawide 4:1 input voltage ranges
◆ Very high efficiency up to 90%
◆ Output voltage adjustable
◆ Remote On/Off control
◆ Operating temp. range –40°C to +75°C
and up to 85 °C with heat-sink
◆ I/O isolation voltage 1500 VDC
◆ Input filter meets EN 55032 class A
without external components
The THN 20WI series models are high performance dc-dc converters. They achieve
20 Watt output power and come in a small size metal casing (1.0” x 1.0” x 0.4”).
The models feature an ultra-wide 4:1 input voltage range while the output voltages
are precisely regulated even under no load conditions. Highest efficiency of up to
90% makes this product very reliable and applicable in temperature ranges of up to
85°C. The low no-load input current characteristics and the remote On/Off control
make these converters an ideal solution for battery operated systems. Typical ap-
plications are in mobile equipment, instrumentation, distributed power architectures
in communication and industrial electronics and everywhere where space on the
PCB is critical.
◆ No minimum load required
◆ Lead free design, RoHS compliant
◆ 3-year product warranty
Models
Order code
Input voltage range
Output voltage
3.3 VDC
Output current max.
4500 mA
4000 mA
4000 mA
1670 mA
1330 mA
833 mA
Efficiency typ.
86 %
89 %
89 %
89 %
89 %
91 %
89 %
89 %
91 %
86 %
89 %
89 %
89 %
90 %
91 %
89 %
89 %
91 %
THN 20-2410WI
THN 20-2411WI
THN 20-2411WI-A1
THN 20-2412WI
THN 20-2413WI
THN 20-2415WI
THN 20-2422WI
THN 20-2423WI
THN 20-2425WI
THN 20-4810WI
THN 20-4811WI
THN 20-4811WI-A1
THN 20-4812WI
THN 20-4813WI
THN 20-4815WI
THN 20-4822WI
THN 20-4823WI
THN 20-4825WI
5.0 VDC
5.0 VDC *1
12 VDC
9 – 36 VDC
15 VDC
(24 VDC nominal)
24 VDC
12 VDC
833 mA
15 VDC
24 VDC (48 VDC) *2
667 mA
417 mA
3.3 VDC
4500 mA
4000 mA
4000 mA
1670 mA
1330 mA
833 mA
5.0 VDC
5.0 VDC *1
12 VDC
18 – 75 VDC
15 VDC
(48 VDC nominal)
24 VDC
12 VDC
833 mA
15 VDC
24 VDC (48 VDC) *2
667 mA
417 mA
*1 Adjustable output up to 6 VDC
*2 The outputs can also be used in serial circuit for single 48 VDC operation.
www.tracopower.com
Page 1 of 4
DC/DC Converters
THN 20WI Series 20 Watt
Input Specifications
Input current at no load
(at nominal input voltage)
– 24 Vin
– 48 Vin
3.3, 5.0, 24 Vout models: 10 mA typ.
12, 15, 12, 15 Vout models: 6 mA typ.
24 Vout models: 12 mA typ.
3.3, 5.0, 24 Vout models: 10 mA typ.
24 Vout models: 8 mA typ.
all other models: 4 mA typ.
Start-up voltage / under voltage shut down
24 Vin models: 9 VDC / 8 VDC
48 Vin models: 18 VDC / 16 VDC
Surge voltage (1 s max.)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Reflected input ripple current
30 mAp-p typ.
Conducted noise (input)
EN 55032 class A, FCC part 15, level A
without external components
– Filter proposal for compling to EN 55032 class B
www.tracopower.com/overview/thn20wi
ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
Radiated immunity
EN 61000-4-3, 10 V/m, perf. criteria A
Fast transient / Surge
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 2 kV perf. criteria A
With external input capacitor e.g. Nippon
chemi-con KY 200 µF, 100 V, ESR 48 mOhm
Conducted immunity
EN 61000-4-6, 10 Vrms, perf. criteria A
Output Specifications
Voltage set accuracy
1 %
Output voltage adj. range
5.0 Vout A1 models: –10 to +20 %
24 Vout models: –10 to +20 %
all other models: 10 % only for single output models
– For further information see application note
www.tracopower.com/overview/thn20wi
Regulation
– Input variation (Vmin – Vmax) single output models: 0.2 % max.
dual output models: 0.5 % max.
single output models: 0.2 % max.
– Load variation (0 – 100 %)
dual output models balanced load: 1.0 % max.
dual output models unbalanced load (25% /100%): 5.0 % max.
Minimum load
not required
Ripple and noise (20 MHz bandwidth)
single output models: 75 mVp-p typ.with external capacitor
dual output models: 100 mVp-p typ. with external capacitor
– For further information see application note
www.tracopower.com/overview/thn20wi
Temperature coefficient
Output current limitation
Short circuit protection
Over voltage protection
0.02 %/K
typ. 150 % of Iout max., Hiccup
continuous, automatic recovery
3.3 Vout models: 3.7 – 5.4 VDC
5.0 Vout models: 5.6 – 7.0 VDC
5.0 Vout A1 models: 6.3 – 7.4 VDC
12 Vout models: 13.5 – 19.6 VDC
15 Vout models: 16.8 – 20.5 VDC
24 Vout models: 29.1 – 32.5 VDC
Start up time (nominal Vin and constant resistive load)
30 ms typ. (for power on and remote on)
250 µs typ. (25% load step change)
Transient response setting time
www.tracopower.com
Page 2 of 4
DC/DC Converters
THN 20WI Series 20 Watt
Output Specifications (continued)
Max. capacitive load
3.3 Vout models: 7’000 µF
5 Vout models: 5’000 µF
12 Vout models: 850 µF
15 Vout models: 700 µF
24 Vout models: 220 µF
12 Vout models: 500 µF (each output)
15 Vout models: 350 µF (each output)
24 Vout models: 100 µF (each output)
General Specifications
Temperature ranges
– Operating without heat sink
–40°C to +75°C (with derating)
– Operating with heat sink
– Case temperature
– Storage
–40°C to +85°C (with derating)
+105°C max.
–55°C to +125°C
Power derating
– Operating without heat sink
– Operating with heat sink
2.0 %/K above 60°C
2.0 %/K above 70°C
Thermal impedance
Humidity (non condensing)
– Natural convection
– Natural convection with heat sink
17.6°C/W
14.8°C/W
5 % to 95 % rel H max.
>1.4 Mio. h
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60 s)
Isolation capacitance
Isolation resistance
Remote On/Off
– Input/Output
1’500 VDC
– Input/Output
1000 pF typ.
– Input/Output (500 VDC)
>1’000 MOhm
– On:
– Off:
– Off idle current:
3.0 ... 15 VDC or open circuit
0 ... 1.2 VDC or short circuit pin 6 and pin 2
1.5 mA
Switching frequency (fixed)
Vibration and thermal shock
Safety standards
330 kHz typ. (pulse width modulation PWM)
EN 61373, MIL-STD-810F
– UL/cUL
UL 60950-1, 2nd Edition, 2007-03-27
CSA C22.2 No. 60950-1-07, 2nd Ed. 2007-03
IEC 60950-1:2005 (2nd Edition); Am 1:2009
EN 60950-1:2006/A11:2009/A1:2010
www.tracopower.com/overview/thn20wi
– CB
– Certification documents
Physical Specifications
Casing material
Baseplate
nickel coated copper
non conductive FR4
silicone (UL 94V-0 rated)
15 g (0.53 oz)
Potting material
Weight
Soldering temperature
265°C / 10 s max.
Environmental compliance – Reach
www.tracopower.com/info/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Supporting Documents: www.tracopower.com/overview/thn20wi
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 3 of 4
DC/DC Converters
THN 20WI Series 20 Watt
Outline Dimensions
Pin-Out
Single
7.62
(0.3)
5.08
(0.2)
Pin
1
Dual
+Vin (Vcc)
+Vin (Vcc)
1
2
6
2
–Vin (GND) –Vin (GND)
Bottom view
4
3
+ Vout
Trim
+ Vout
Common
–Vout
4
3
5
5
–Vout
10.16 10.16
(0.4)
2.5
(0.1)
5.6
(0.22)
9.9
(0.39)
6
Remote On/Off
(0.4)
25.4
(1.0)
Dimensions in [mm], () = Inch
Pin diameter ø 1.0 (0.04)
Pin pitch tolerances: 0.25 ( 0.01)
Tolerances: 0.5 ( 0.02)
Heat-Sink (Option)
Order code: THN-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
8 g (0.28oz) without converter
Material:
Finish:
Weight:
Thermal impedance after assembling: 14.8 K/W
31.0 (1.22) max.
Heat-sink
Thermal pad
Clamp
Note:
The product label on converter has to be re-
moved before mounting the heat-sink.
For volume orders converters will be sup-
plied with heat-sink already mounted. Please
contact factory for quotation.
Converter
Separate heat-sinks are only available for
prototypes and small quantity orders.
16.5 (0.65)
max.
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. March 26. 2018
www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明