TMDC60 [TRACOPOWER]
DC/DC Converters;型号: | TMDC60 |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:1083K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
TMDC 60 Series, 60 Watt
CB
Features
Scheme
◆ Fully encapsulated low profile plastic case
◆ Ultra wide 4:1 input voltage range
◆ Operating temperature range
–40°C to +85°C
◆ I/O isolation 2500 VDC (functional)
◆ Excellent efficiency up to 92 %
◆ Input filter to meet EN 55032, class A
◆ Optional DIN-Rail mount adapter
◆ No minimum load required
◆ Input polarity protection
◆ Power good LED indicator
◆ Remote On/Off
◆ 3-year product warranty
The TMDC 60 Series is a range of encapsulated high performance DC/DC con-
verter modules with ultra wide input voltage ranges. With a very high efficiency of
up to 92% and the use of highest grade components these 60 W converters can be
operated in an ambient temperature range of -40°C up to 70°C with full load and
up to 85°C with 50% load reduction. The EMC immunity is aligned for industrial
applications and DIN-rail mount adapters are available as option. Input polarity
protection remote On/Off function and power good LED indicator makes this unit to
a practical and reliable DC source for any application - Fit and forget!
Models
Order code
Input voltage range
Output voltage
5.1 VDC
12 VDC
Output current max.
12‘000 mA
5‘000 mA
Efficiency
90 %
91 %
91 %
91 %
91 %
92 %
91 %
91 %
TMDC 60-2411
TMDC 60-2412
TMDC 60-2415
TMDC 60-2418
TMDC 60-4811
TMDC 60-4812
TMDC 60-4815
TMDC 60-4818
9 – 36 VDC
24 VDC
2500 mA
(nominal 24 VDC)
48 VDC
1250 mA
5.1 VDC
12 VDC
12‘000 mA
5’000 mA
18 – 75 VDC
24 VDC
2500 mA
(nominal 48 VDC)
48 VDC
1250 mA
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
TMDC 60 Series
60 Watt
Input Specifications
Input current at no load
(nominal input voltage)
– 24 Vin
– 48 Vin
5.1 & 12 VDC models: 100 mA typ.
24 VDC models: 110 mA typ.
48 VDC models: 60 mA typ.
5.1 VDC models: 40 mA typ.
12 & 24 VDC models: 60 mA typ.
48 VDC models: 50 mA typ.
Surge voltage (100 msec. max.)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Start up time
50 ms max.
Start-up voltage
24 Vin models: 9 VDC max.
48 Vin models: 18 VDC max.
Under voltage lockout
EMI Conducted
EMI Radiated
24 Vin models: 7.5 VDC typ.
48 Vin models: 16 VDC typ.
EN 55032 class A, FCC part 15 class A
without external components
EN 55032 class A, FCC part 15 class A
with external components
EMC immunity
EN 55024
– ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 4 kV,
perf. criteria A
– Radiated immunity
– Fast transient / surge
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 2 kV, perf. criteria A
EN 61000-4-6, 10 Vrms, perf. criteria A
EN 61000-4-8, 30 A/m, perf. criteria A
– Conducted immunity
– Magnetic field immunity
Output Specifications
Voltage set accuracy
Regulation
2.0 % max.
– Input variation Vin min. to Vin max.
– Load variation 0 – 100 %
1.5 % max.
1.0 % max.
Minimum load
not required
0.02 %/K
Temperature coefficient
Ripple and noise (20 MHz Bandwidth)
5.1 VDC models: 100 mVpk-pk. typ.
12 & 24 VDC models: 150 mVpk-pk typ.
48 VDC models: 200 mVpk-pk. typ.
Transient response (alignment to 1% at load step change 75% to 100% )
– Recovery time
– Deviation
250 µs typ.
5 % max.
Over voltage protection
Output current limitation
Short circuit protection
120 % of Vout (Zener diode clamp)
at 150 % of Iout max.
hiccup mode, automatic recovery
Capacitive load
5.1 VDC models: 20‘400 µF max.
12.0 VDC models: 3’540 µF max.
24.0 VDC models: 890 µF max.
48.0 VDC models: 220 µF max.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TMDC 60 Series
60 Watt
General Specifications
Temperature ranges
– Operating ambient with natural convection (20 LFM) –40°C to +85°C (see load derating)
– IEC/EN/UL60950-1 approved ambient
– Case temperature
+60°C max. (without derating)
+95°C max.
– Storage
–50°C to +125°C
Load derating (with natural convection 20 LFM)
3.3 %/K above +70°C
3.5 K/W
Thermal impedance
– Natural convection 20 LFM
Humidity (non condensing)
95 % rel H max.
242’029 h
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60 sec.) – Input/Output
2500 VDC
Isolation capacitance
Isolation resistance
Altitude during operation
Switching frequency
Remote On/Off
– Input/Output
– Input/Output
3000 pF max. (100 kHz, 1 V)
>1000 Mohm (500 VDC)
2’000 m max.
210 kHz typ.
– On:
– Off:
– Off idle current:
3.5 to 12 VDC to on terminal 1 or open circuit.
0 to +1.2 VDC on terminal 1 reference to -Vin
3 mA typ.
Safety standards
– CB test report
UL/cUL 60950-1 2nd edition,
IEC 60950-1:2005 (2nd edition)+Am1:2009
+Am2:2013, EN 60950-1:2006+A11:2009+A1:
2010+A12:2011+A2:2013
– UL test certificat
UL/cUL 60950-1 2nd edition,
CSA C22.2 No. 60950-1-07, 2nd Ed.
www.tracopower.com/overview/tmdc60
– Certification documents
Physical Specifications
Casing material
plastic resin (UL 94V-0 rated)
300 g (10.57 oz)
Weight
Environmental compliance – Reach declaration
www.tracopower.com/products/reach-declaration.pdf
– RoHS
directive 2011/65/EU
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TMDC 60 Series
60 Watt
Outline Dimensions
67.8 (2.67)
50.0 (1.97)
38.0 (1.50)
8.9
(0.35)
5.0
(0.20)
11.8
(0.46)
Terminal connection
Pin
1
Single
Remote On/Off
–Vin (GND)
+Vin (Vcc)
NC
4
5 6 7 8
2
4 x ø3.5
3
4
5
+Vout
6
NC
7
–Vout
Top view
8
NC
Dimensions in [mm], () = Inch
Terminals: Wires 1.5mm2 max.
Recommended tightening torque:
0.5 to 0.7 Nm (4.5 to 6.2 lb.in.)
Case tolerances: 0.25 ( 0.01)
1
2
3
DIN-Rail mount adapter (optional)
Order code: TMP-MK2
Weight: 59 g (2.08 oz) without converter
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. March 09. 2018
www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明