TMPS05-115 [TRACOPOWER]

AC/DC Power Module;
TMPS05-115
型号: TMPS05-115
厂家: TRACO ELECTRONIC AG    TRACO ELECTRONIC AG
描述:

AC/DC Power Module

文件: 总3页 (文件大小:294K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
AC/DC Power Module  
TMPS 05 Series, 5 Watt  
PCB Power module in 1" x 1" package  
Certified to EN60335-1 for household  
appliance.  
No load input power <300 mW  
to comply with ErP directive  
Operating temperature range  
–25°C to +70°C  
EMI meets EN 55022 class B and  
EN 55014-1  
Protection class II prepared  
3-year product warranty  
CB  
Scheme  
UL 60950-1  
The TMPS-05 series comprises ultra compact AC/DC power supply modules in  
lightweight fully encapsulated plastic casing for PCB mount. Beside the safety  
approvals for industrial and IT solutions, they are also certified to EN 60335-1  
for household appliance. These 5 Watt modules are the ideal solution for low  
power or segregated circuits when space is critical or for an efficient powering  
of a standby mode when compliance to ErP directive is required. A peak current  
of 130% facilitates the activation of main circuits.  
Models  
Output Current  
Order code  
Output power max.  
Output Voltage  
Efficiency  
peak 1)  
1970 mA  
1300 mA  
721 mA  
540 mA  
433 mA  
270 mA  
135 mA  
max.  
TMPS 05-103  
3.3 VDC  
5.0 VDC  
9.0 VDC  
12 VDC  
15 VDC  
24 VDC  
48 VDC  
1515 mA  
1000 mA  
555 mA  
416 mA  
333 mA  
208 mA  
104 mA  
74 %  
80 %  
82 %  
82 %  
83 %  
83 %  
85 %  
TMPS 05-105  
TMPS 05-109  
TMPS 05-112  
TMPS 05-115  
TMPS 05-124  
TMPS 05-148  
5 W  
1)  
< 30 s with maximum duty cycle of 10%, average output power must not exceed 5 W  
http://www.tracopower.com  
Page 1 of 3  
TMPS 05 Series, 5 Watt  
Input Specifications  
Input voltage ranges  
– AC input  
– DC Input  
85 – 264 VAC  
120 – 370 VDC  
Input frequency  
47 – 63 Hz  
Input current at full load (115 VAC or 230 VAC nominal input)  
Inrush current (115 VAC / 230 VAC nominal input)  
No-Load power consumption  
110 mA typ.  
20 A max. / 40 A max.  
300 mW max.  
Output Specifications  
Voltage set accuracy  
2 % max.  
Minimum load  
no minimum load required  
Ripple and noise (20 MHz bandwidth)  
3.3 and 5 VDC models: 60 mVp-p max.  
other models: 1 % max. of nominal Vout  
Regulation  
– Input variation  
– Load variation  
1 % max.  
1 % max.  
Hold-up time  
8 ms typ. (at 115 VAC and full load)  
40 ms typ. (at 230 VAC and full load)  
max. 190 % of nominal Vout  
at 150 % typ. (autorecovery)  
hiccup, automatic recovery  
Over voltage protection  
Current limitation (operation under over-load conditions may cause damage)  
Short circuit protection  
Max. capacitive load  
3.3 VDC model: 2200 µF  
5.0 VDC model: 1000 µF  
9.0 VDC model: 300 µF  
12 VDC model: 160 µF  
15 VDC model: 100 µF  
24 VDC model: 43 µF  
48 VDC model: 10 µF  
General Specifications  
Temperature ranges  
– Operating (20 LFM convection cooling)  
–25°C to +70°C  
– Power derating above +50°C  
– Storage (non operating)  
2.5 %/K  
–40°C to +85°C  
Temperature coefficient  
0.05 %/°C  
95 % rel max.  
65 kHz typ.  
4‘242 VDC  
>100 MOhm  
628‘000 h  
Humidity (non condensing)  
Switching frequency (pulse width modulation PWM)  
Isolation voltage (60 sec.) – Input/Output  
Isolation resistance (500 VDC)  
Reliability /calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)  
Electromagnetic compatibility (Conducted and radiated input suppression)  
(EMC), emissions  
EN 55011/22, class B, FCC part 15, level B  
EN 55014-1,  
Electromagnetic compatibility  
EN55014-2; EN55024  
(EMC), immunity  
– Electrostatic discharge ESD  
– RF field immunity  
– Electrical fast transients/burst immunity  
– Surge  
– Conducted RF  
– Magnetic field immunity  
– Voltage dip and interruptions  
IEC / EN 61000-4-2, 8 kV / 4kV, criteria A  
IEC / EN 61000-4-3, 10 V/m, criteria A  
IEC / EN 61000-4-4, 2 kV, criteria A  
IEC / EN 61000-4-5, 1 kV, criteria A  
IEC / EN 61000-4-6, 10 Vrms, criteria A  
IEC / EN 61000-4-8, 30 A/m, criteria A  
IEC / EN 61000-4-11  
>95 %, 250 periods, perf. criteria B  
60 %, 10 periods, perf. criteria A  
30 %, 25 periods, perf. criteria A  
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.  
http://www.tracopower.com  
Page 2 of 3  
TMPS 05 Series, 5 Watt  
General Specifications (continued)  
Protection class II  
prepared according IEC/EN 60536  
Safety standards  
IEC/EN 60950-1, UL 60950-1  
EN 60335-1  
Safety approvals  
– certification documents (pending)  
www.tracopower.com/overview/tmps05  
Environmental compliance – Reach (pending)  
www.tracopower.com/products/reach-declaration.pdf  
RoHS directive 2011/65/EU  
– RoHS  
Physical Specifications  
Casing material  
plastic resin + fiberglass (UL 94V-0 rated)  
tinned copper  
Pin  
Weight  
19.7 g (0.69 oz)  
Outline Dimensions  
25.4 (1.00)  
Pin-Out  
2.54  
(0.10)  
5.08  
(0.20)  
Pin  
1
2
3
4
5
AC(N)  
AC(L)  
NC*  
-Vout  
+Vout  
1
2
*internally not connected but  
keep it isolated from primary  
circuit  
5
4
3
10.16  
(0.40)  
10.16  
(0.40)  
25.4 (1.00)  
Dimensions in[mm], () = Inches  
Tolerances = 0.5mm (0.01)  
Ø
0.6 (Ø 0.02)  
Pin diameter ø 0.6 mm (0.02 0.004)  
©
Copyright 2016 Traco Electronic AG  
Specifications can be changed without notice!  
Rev. Decmeber 20. 2016  
Page 3 of 3  
www.tracopower.com  

相关型号:

TMPS05-124

AC/DC Power Module
TRACOPOWER

TMPS05-148

AC/DC Power Module
TRACOPOWER

TMPS05_16

AC/DC Power Module
TRACOPOWER

TMPS10

AC/DC Power Supply
TRACOPOWER

TMPS10-103

AC/DC Power Supply
TRACOPOWER

TMPS10-105

AC/DC Power Supply
TRACOPOWER

TMPS10-109

AC/DC Power Supply
TRACOPOWER

TMPS10-112

AC/DC Power Supply
TRACOPOWER

TMPS10-115

AC/DC Power Supply
TRACOPOWER

TMPS10-124

AC/DC Power Supply
TRACOPOWER

TMPS10-148

AC/DC Power Supply
TRACOPOWER

TMPT1621B3

Small Signal Bipolar Transistor, 1-Element, NPN, Silicon, TO-236AA, TO-236AA, 3 PIN
VISHAY