TSP480-124-3PAC500 [TRACOPOWER]
Industrial Power Supplies;
| 型号： | TSP480-124-3PAC500 |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | Industrial Power Supplies |
| 文件： | 总6页 (文件大小：522K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Industrial Power Supplies
TSP-3P Series, 240–960 Watt
CB
Features 200% Peak Power!
Scheme
EMC
LVD
IEC 60950-1 UL 60950-1
UL 508
ATEX II3G
IECEx
EN 60950-1
EN 61558-2-16
EN 60204
◆ 3-phase input 3AC 400V or 3AC 500V
◆ 200 % boost power for up to 5 seconds
◆ Alternative to AC transformers
◆ Fully regulated 24 VDC output with
10 A, 20 A or 40 A
◆ Rugged metal case design qualified for
harsh industrial environment
◆ High efficiency >92%
◆ Operating temperature range:
–25°C to +60°C (full power)
◆ Overload and over temperature protection
◆ Industrial safety approvals
◆ Cost effective design
◆ 3-year product warranty
The TRACOPOWER TSP-3P series of high performance DIN-rail power supplies of-
fers an economical solution to generate a regulated DC voltage from three-phase
mains networks. The smart design achieves a very high efficiency at ultra compact
size and very competitive cost. The series provides models with 240, 480 and 960
Watt output power all with additional power reserve of up to 200%.
This high peak power guarantees a reliable start-up of loads with high inrush cur-
rents such as motors, valves and other industrial loads. In many applications these
switching power supplies can also replace mains transformers with rectifiers.
Models
Order Code
Output Power
Input Voltage
Output Voltage
*Output Current
(nom.)
(nom.)
(nom.)
(nom.)
TSP 240-124-3PAC400
TSP 240-124-3PAC500
TSP 480-124-3PAC400
TSP 480-124-3PAC500
TSP 960-124-3PAC400
TSP 960-124-3PAC500
3 AC 400 V
3 AC 500 V
3 AC 400 V
3 AC 500 V
3 AC 400 V
3 AC 500 V
24 VDC
24 VDC
24 VDC
24 VDC
24 VDC
24 VDC
10 A
10 A
20 A
20 A
40 A
40 A
240 W
480 W
960 W
* 200% peak current for up to 5 sec.
http://www.tracopower.com
Page 1 of 6
Industrial Power Supplies
TSP-3P Series
240–960 Watt
Input Specifications
Input voltage range
star-net configuration (2-phase operation not possible)
400 VAC models: 320 – 440 VAC
500 VAC models: 400 – 550 VAC (derating below 410 VAC see graph 2)
Input voltage frequency
Harmonic limits
47 – 63 Hz
EN 61000-3-2, Class B (for <16 A per phase)
>0.8 at full load
Power factor
Recommended circuit breaker,
6.0 A characteristic B
Output Specifications
Output voltage:
24 VDC (fixed)
Regulation
– Input / load variation
1 % max. + voltage drop at low input voltage and/or
boost power, see graph 1 & 2
Boost power
– max. current
– duty cycle
200 % of nominal output current
<10 %
– max. cycle time
– input voltage requirements
5 sec limited by timer (automatic restart after 30 sec.)
see graph 1 & 2
Ripple and noise
(20MHz bandwidth)
– nominal operation
– boost power operation
100 mV pk-pk typ.
up to 750 mV pk-pk
Rise time
200 ms typ.
Current limitation
at 230 % of nominal output current, constant current
33 V typ.
Overvoltage protection
Overtemperature protection
Power back immunity
switch off at overtemperature (automatic restart)
35 VDC continuouse, 40 VDC for one second
Output Power Derating
Graph 1: 400 VAC input models
Graph 2: 500 VAC input models
VDCout
25
VDCout
25
100%load
24
50% load
24
23
22
21
23
22
21
VACin
VACin
320 330 340 350 360 370
430 440
400 410 420 430 450 460
540 550
General Specifications
Temperature range
– Full power operation
– Max. operating
– Start up
–25°C to +60°C
+70°C, 2.5 %/K derating above +60°C
–40°C
– In accordance to UL508
–25°C to +40°C
Cooling
convection cooling, no internal fan
95 % rel. H max.
Humidity (non condensing)
Reliability, calculated MTBF at +25°C acc. to IEC 61709 – TSP 240 & 480 >1 Mio h
– TSP 960 >800‘000 h
Isolation
according to IEC/EN 60950-1, UL 60950-1, UL 508
Class of protection
Degree of protection
safety class I (IEC 536)
IP 20 (IEC/EN 60529)
http://www.tracopower.com
Page 2 of 6
Industrial Power Supplies
TSP-3P Series
240–960 Watt
General Specifications
Electromagnetic compatibility (EMC), Emissions
EN 61000-6-3
– Conducted RI suppression on input
– Radiated RI suppression
Electromagnetic compatibility (EMC), Immunity
EN 55011 class B, EN 55022 class B,
EN 55011 class B, EN 55022 class B,
EN 61000-6-2
– Electrostatic discharge (ESD)
– Radiated RF field immunity
IEC/EN 61000-4-2
IEC/EN 61000-4-3
8 kV / 15 kV criteria tba
10 V/m
4 kV
criteria tba
criteria tba
criteria tba
criteria tba
criteria tba
criteria tba
criteria tba
criteria tba
criteria tba
– Electrical fast transient
burst immunity input IEC/EN 61000-4-4
burst immunity output IEC/EN 61000-4-4
L – L IEC/EN 61000-4-5
2 kV
2 kV
– Surge immunity
L – PE IEC/EN 61000-4-5
4 kV
+ Output – - Output IEC/EN 61000-4-5
+ Output – PE IEC/EN 61000-4-5
– Output – PE IEC/EN 61000-4-5
0.5 kV
0.5 kV
0.5 kV
10 V
– Immunity to conducted RF disturbances
– Mains voltage dips and interruptions
IEC/EN 61000-4-6
IEC/EN 61000-4-11
Safety standards
– Information technology equipment
– Industrial control equipment
IEC/EN 60950-1, UL 60950-1
UL 508 listed, CSA C22.2 No. 107.1
– Equipment for use in explosive atmospheres
– Electrical equipment for machines
– Electronic equipment for power installations
– Safety of power transformers
IEC 60079-0, IEC 60079-15, ATEX 94/9/EC
EN 60204
EN 50178
EN 61558-2-16
Safety approvals and
– CB report for IEC 60950-1
– SIQ certificate for EN 60950-1
– IECEx test report for IEC 60079-15
www.tracopower.com/products/tsp3p-cb.pdf
www.tracopower.com/products/tsp3p-siq.pdf
www.tracopower.com/products/tsp3p-iecex.pdf
www.tracopower.com/products/tsp3p-atex.pdf
www.tracopower.com/products/tsp3p-ul508.pdf
–
II3G Ex nA nC llC T3
– UL approvals for UL 508 listed
– Curtis-Straus certificate for UL 60950-1 (2nd) www.tracopower.com/products/tsp3p-ul.pdf
– Bureau Veritas for other standards
www.tracopower.com/products/tsp3p-bv.pdf
Environmental compliance – Reach
www.tracopower.com/products/tsp3p-reach.pdf
RoHS directive 2002/95/EC
– RoHS
Environment
Status signals
– Vibration acc. IEC 60068-2-6;
– Shock acc. IEC 60068-2-27
0.075 mm / 10 – 55 Hz,
11ms / 15 g
– DC-OK relay contact
DC OK = contact closed at >20...22 VDC
rated: 30 VDC/1.0 A for 24 VDC models
green LED at >20...22 VDC
– DC-OK indication
– Phase error indication
red blinking LED if one or two phases are missing
(function only if earth is connected)
– Overload / Overtemperature
– Automatic restart indication
red LED on at >100% nominal load (5 sec. count down
for boost power is activated)
red blinking LED at temperature shut down (manual
restart required - mains disconnect for 5 sec.)
red blinking LED during overload recovery periode
Enclosure material
Mounting
aluminium (chassis) / stainless steel (cover)
– DIN-rail mounting
for DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring)
– Wall mounting (option)
with wall mounting bracket - see page 6
Connection
screw terminals
Installation instructions
www.tracopower.com/products/tsp3p-inst.pdf
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 6
Industrial Power Supplies
TSP-3P Series
240–960 Watt
Outline Dimensions
54.0 (2.13)
110.0 (4.33)
240 Watt models
_
+
DC-OK
DC-ON
OVER-LOAD
RESTART
PHASE FAULT
L1 L2 L3
25.0
(0.98)
14.5
(0.57)
Weight: 575 g (1.27 lb)
80.0 (3.15)
125.0 (4.92)
480 Watt models
_
_
+ +
DC-OK
DC-ON
OVER-LOAD
RESTART
PHASE FAULT
L1 L2 L3
46.0
(1.81)
17.0
(0.67)
25.0
(0.98)
25.0
(0.98)
Weight: 1.05 kg (2.31 lb)
Dimensions in [mm], ( ) = Inch
Tolerances: 0.5 mm ( 0.02)
http://www.tracopower.com
Page 4 of 6
Industrial Power Supplies
TSP-3P Series
240–960 Watt
Outline Dimensions
960 Watt models
Weight: 2.35 kg (5.19 lb)
25.0
(0.98)
25.0
(0.98)
21.0
(0.83)
123.0
(4.84)
125.0 (4.92)
165.0 (6.50)
OVER-LOAD
RESTART
DC-OK
DC-ON
_
_
PHASE FAULT
+
+
L1 L2 L3
Dimensions in [mm], ( ) = Inch
Tolerances: 0.5 mm ( 0.02)
http://www.tracopower.com
Page 5 of 6
Industrial Power Supplies
TSP-3P Series
240–960 Watt
TSP–WMK Wall Mounting Bracket
Order code
For models
Content of kit
TSP-WMK03
TSP-WMK02
240 W
480 W & 960 W
1 bracket
2 brackets
85.0 (3.35)
TSP-WMK03
42.5 (1.67)
34.5 (1.36)
34.5 (1.36)
ø
ø
4.25 (0.17)
4.25 (0.17)
TSP 240-124-3PAC400
TSP 240-124-3PAC500
ø
4.25 (0.17)
R 2.12 (0.083)
2.0 (0.08)
4 x positioning holes
15.0
(0.59)
15.0
(0.59)
TSP-WMK02
Material: 2 mm Mild Steel
Tolerance: 0.1mm ( 0.004)
46.0 (1.81)
33.0 (1.30)
TSP 480-124-3PAC400
TSP 480-124-3PAC500
96.0 (3.78)
25 (0.98)
ø
4.3 (0.17)
2x
ø4.3 (0.17)
TSP 960-124-3PAC400
TSP 960-124-3PAC500
4 x positioning holes
173.0 (6.81)
15.0
(0.59)
Specifications can be changed any time without notice.
Rev. 03/12
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 6 of 6
相关型号：
TSP4D197M016AH6510D540
Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 16V, 20% +Tol, 20% -Tol, 190uF, Surface Mount, 3531
KEMET
©2020 ICPDF网 联系我们和版权申明