USB-2-X [TRINAMIC]

USB to CAN,IIC,RS485,SPI,LIN Interface Converter; USB转CAN , IIC , RS485 , SPI , LIN接口转换器
USB-2-X
型号: USB-2-X
厂家: TRINAMIC MOTION CONTROL GMBH & CO. KG.    TRINAMIC MOTION CONTROL GMBH & CO. KG.
描述:

USB to CAN,IIC,RS485,SPI,LIN Interface Converter
USB转CAN , IIC , RS485 , SPI , LIN接口转换器

转换器
文件: 总1页 (文件大小:314K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
BUS INTERFACE CONVERTERS  
INTERFACES  
USB-2-X  
USB  
to CAN, IIC, RS485, SPI, LIN  
Interface Converter  
10 mm  
MAIN CHARACTERISTICS  
INFO The Engineer´s „Swiss Army Knife“ for Serial Bus Systems  
USB host interface  
connection to USB 1.1 or USB 2.0 hosts  
possible (a cable is included)  
USB full speed device (12MBit/s)  
bus powered (no extra power supply  
needed)  
The USB-2-X device is an interface converter that is equipped  
with a CAN interface, an IIC interface, a LIN interface, an SPI  
interface and an RS-485 interface. It is connected to the PC via  
an USB interface. The USB-2-X device is mainly designed for  
use with some of the Trinamic evaluation kits, but it can also  
be used in any other purpose where a connection between a  
PC and a CAN interface, an IIC interface, a LIN interface, an SPI  
interface or an RS485 interface is needed. The software sup-  
plied with this product can be used with every version of the  
Windows operating system that supports USB (Windows 98,  
Windows ME, Windows 2000, Windows XP). The USB-2-X device  
can be connected to USB 1.1 or USB 2.0 hosts and supports the  
full bitrate of 12MBit/s. It is fully powered by the bus, so no  
extra power supply is needed.  
CAN  
CAN 2.0A and 2.0B compatible  
standard (11 bit) and extended (29 bit)  
identifier possible  
transceiver: ISO 11898 compatible  
maximum bit rate: 1MBit/s  
120 ohms termination resistor can be  
activated with a jumper  
LIN  
compatible with LIN specification rev 1.3  
up to 20kBit/s  
Industry standard transceiver  
I²C  
single master  
up to 400kBit/s  
7-bit addressing  
RS-485  
· half duplex communication mode  
· industry standard 75176 transceiver  
· 2400, 9600 and 19200 bps supported  
USB2X  
USB  
SPI  
· master functionality  
· user defined bit rate up to 3.7MBit/s  
• RoHS compliant  
CAN  
IIC  
LIN  
SPI  
RS-485  
ORDER CODE  
DESCRIPTION  
TMC USB-2-X V2  
USB interface converter (with USB cable)  
www.trinamic.com – for detailed information and datasheets  
63  

相关型号:

USB-232

Serial Instrument Control Interfaces for USB
NI

USB-2401

4-CH 24-Bit Universal Input USB DAQ Modules
ETC

USB-2405

2 or 4-ch 24-bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
ADLINK

USB-2405/2AI

2 or 4-ch 24-bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
ADLINK

USB-2405/OEM

2 or 4-ch 24-bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
ADLINK

USB-2405/S

2 or 4-ch 24-bit 128kS/s Dynamic Signal Acquisition USB 2.0 Module
ADLINK

USB-4604B

4-port RS-232 Serial to USB Converter with ESD Surge Protection
ADVANTECH

USB-4604BM

4-port RS-232 Serial to USB Converter with ESD Surge Protection
ADVANTECH

USB-4620

5-Port Isolated USB 2.0 Full-Speed Hub
ADVANTECH

USB-4620-AE

5-port Full-speed Isolated USB 2.0 Hub
ADVANTECH

USB-4620_15

5-port Full-speed Isolated USB 2.0 Hub
ADVANTECH

USB-4622

5-port USB 2.0 Hub
ADVANTECH