857179 [TRIQUINT]
1090 MHz SAW Filter;型号: | 857179 |
厂家: | TRIQUINT SEMICONDUCTOR |
描述: | 1090 MHz SAW Filter |
文件: | 总6页 (文件大小:889K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
857179
1090 MHz SAW Filter
Applications
For Military applications
Product Features
Functional Block Diagram
Top view
Usable bandwidth 10 MHz
Low Loss
Gnd
Balanced operation
4
3
2
1
5
6
7
Gnd
In -
Out -
Out +
Gnd
Matching is required for optimum performance at
50Ω
Small Size: 3.80 x 3.80 x 1.27 mm
Ceramic Surface Mount Package (SMP)
Hermetically Sealed
In +
8
RoHS compliant, Pb-free
Pb
Gnd
General Description
Pin Configuration
857179 is a general purpose filter designed in a 3.8 x 3.8
mm hermetic package with low insertion loss and high
attenuation.
Pin # Balanced
Description
Input +
Input -
1
2
6
Output +
5
Output -
3,4,7,8
Case Ground
Ordering Information
Part No.
857179
Description
packaged part
857179-EVB
evaluation board
Standard T/R size = 4000 units/reel.
Preliminary Data Sheet: Rev A 10/08/12
- 1 of 6 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network
© 2012 TriQuint Semiconductor, Inc.
857179
1090 MHz SAW Filter
Specifications
Electrical Specifications (1)
Specified Temperature Range: (2) -55 to +85 ºC
Parameter (3)
Conditions
Min
Typical (4) Max Units
Center Frequency
-
1090
5.6
1073
1100
0.2
7.0
68
-
MHz
dB
Maximum Insertion Loss (5)
Lower 1.25 dB Bandedge (6)
Upper 1.25 dB Bandedge (6)
Amplitude Variation (7)
Group Delay Ripple (7)
1085 – 1095 MHz
-
-
6.3
1085
-
1.25
20
-
MHz
MHz
dB p-p
ns p-p
dB
1095
-
-
55
50
50
55
-
1085 – 1095 MHz
1085 – 1095 MHz
500 – 1006 MHz
1006 – 1050 MHz
1140 – 1160 MHz
1160 – 1600 MHz
Single-ended
(8)
Absolute Attenuation
56
-
dB
70
-
dB
67
-
dB
Source Impedance (9)
Load Impedance (9)
50
50
-
-
Single-ended
-
Notes:
1. All specifications are based on the TriQuint schematic shown on page 3
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature, unless otherwise noted
5. Referenced to maximum insertion loss within the specified frequency points
6. Relative to insertion loss at center frequency
7. Total variation over the defined frequency range.
8. Absolute Attenuation measurements are referenced to zero dB
9. This is the optimum impedance in order to achieve the performance shown
Absolute Maximum Ratings
Parameter
Rating
Operable Temperature
Storage Temperature
-55 to +85 oC
-55 to +85 oC
Operation of this device outside the parameter ranges given above may cause permanent damage.
Preliminary Data Sheet: Rev A 10/08/12
- 2 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
857179
1090 MHz SAW Filter
Reference Design
Schematic
1
2
5
6
3.3pF
3.3pF
50
Balanced
Input
50
Balanced
Output
50
36nH
50
3,4,7,8
PC Board
Mounting Configuration
.41
1.70
.46
L2
C1
L3 C3
C4
4.01
L1
L4
C2
1.19
.81
.81
1.19
Notes:
Notes:
1. All dimensions are in millimeters.
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
2. This footprint represents a recommendation only.
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
Bill of Material
Reference Desg. Value Description
Manufacturer Part Number
L1
36nH
3.3pF
3.3pF
N/A
Coil Wire-wound, 0402, 5%
Chip Capacitor, 0402, 5%
Chip Capacitor, 0402, 5%
SMA connector
Murata
LQW15AN36NJ00
GRM1555C1H3R3GZ01
GRM1555C1H3R3GZ01
9602-1111-018
C1
C2
SMA
PCB
Murata
Murata
Radiall USA Inc.
multiple
N/A
3-layer
960458
Preliminary Data Sheet: Rev A 10/08/12
- 3 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
857179
1090 MHz SAW Filter
Typical Performance (at room temperature)
Preliminary Data Sheet: Rev A 10/08/12
- 4 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
857179
1090 MHz SAW Filter
Mechanical Information
Package Information, Dimensions and Marking
TriQuint
logo
Package Style: SMP-15
Dimensions: 3.80 x 3.80 x 1.27 mm
Marking
code
Date code
KH
Body: Al2O3 ceramic
ID dot
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni
YYWW
plating
All dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall length and width
±0.10mm
0.61
1.27 NOM.
1.45 MAX.
The date code consists of: YY =The last two digits of the
year (2 Digits), WW = the calendar week of the year (2
Digits)
3.80
1.27
3.80
0.60
1.00
1.50
Tape and Reel Information
Standard T/R size = 4000 units/reel. All dimensions are in millimeters
12.8
TriQuint
4.0
2.7
Ø330
Ø1.5
A
0.3
logo
1.75
5.5
2.0
4.1
12.0
Pad 1 ID dot
Ø102
Ø1.5
A
Ø20.2
Ø13.0
1.8
Section A-A
4.1
8.0
Direction of trave
2.0
Preliminary Data Sheet: Rev A 10/08/12
- 5 of 6 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network
© 2012 TriQuint Semiconductor, Inc.
857179
1090 MHz SAW Filter
Product Compliance Information
ESD Information
Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C
Caution! ESD-Sensitive Device
Refer to Soldering Profile for recommended guidelines.
ESD Rating: TBD
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
Value:
Test:
Passes TBD V min.
Human Body Model (HBM)
JEDEC Standard JESD22-A114
Standard:
This product also has the following attributes:
ESD Rating: TBD
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
Value:
Test:
Standard:
Passes TBD V min.
Machine Model (MM)
JEDEC Standard JESD22-A115
SVHC Free
MSL Rating
Devices are Hermetic, therefore MSL is not applicable
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com
Email: info-sales@tqs.com
Tel:
Fax:
+1.407.886.8860
+1.407.886.7061
For technical questions and application information:
Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Preliminary Data Sheet: Rev A 10/08/12
- 6 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
相关型号:
85718-101LF
Board Connector, 9 Contact(s), 3 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-102LF
Board Connector, 25 Contact(s), 5 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-103LF
Board Connector, 12 Contact(s), 4 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-104LF
Board Connector, 15 Contact(s), 5 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-105LF
Board Connector, 24 Contact(s), 4 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-106LF
Board Connector, 15 Contact(s), 5 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-108LF
Board Connector, 22 Contact(s), 5 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-112
Board Connector, 15 Contact(s), 5 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle
AMPHENOL
85718-112LF
Board Connector, 15 Contact(s), 5 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle, LEAD FREE
AMPHENOL
85718-201
Board Connector, 9 Contact(s), 3 Row(s), Female, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Receptacle
AMPHENOL
©2020 ICPDF网 联系我们和版权申明