TUP110-T32 [TRUMPOWER]

110 WATT POWER ADAPTERS; 110瓦电源适配器
TUP110-T32
型号: TUP110-T32
厂家: Tumbler Technologies + TRUMPower    Tumbler Technologies + TRUMPower
描述:

110 WATT POWER ADAPTERS
110瓦电源适配器

文件: 总2页 (文件大小:179K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TRUMPower  
The TUP110 series of AC/DC switching power  
supplies are for 110 watts of continuous output  
110 WATT POWER ADAPTERS  
DESCRIPTION  
TUP110 SERIES  
(LVD+EMC)  
power. They are enclosed in  
a
94V-1 rated  
polyphenylene-oxide case with an IEC 320 inlet to  
mate with interchangeable cord for world-wide  
use. An on/off switch can be added at request. All  
models meet CISPR 22 and FCC class B emission  
limits, and comply with UL, CSA, IEC and CE  
requirements.  
FEATURES  
Single, dual, triple or quadruple outputs  
Optional output connectors  
Optional on/off switch  
Safety Standard Approvals  
UL 60950-1  
CSA C22.2 No. 60950-1  
Optional Power Fail Detect (PFD) signal  
100% burn-in  
Wide input range 85 to 264 VAC  
Input surge current protection  
Overvoltage protections  
TÜV EN60950-1  
Overcurrent protections  
ENVIRONMENTAL SPECIFICATIONS  
INPUT SPECIFICATIONS  
Operating temperature  
Storage temperature:  
Relative humidity:  
Derating:  
0ºC to +70ºC  
Input voltage:  
Input frequency47 to 63 Hz  
Input current3.20Armsfor 115VAC  
1.80Armsfor 230VAC  
85 to 264 VAC  
-40ºC to +85ºC  
5% to 95% non-condensing  
Derate from 100% at +50ºC  
linearly to 50% at +70ºC  
Leakage current0.40mA max. @ 115VAC, 60Hz  
0.80mA max. @ 230VAC, 50Hz  
OUTPUT SPECIFICATIONS  
Output voltage/currentSee rating chart  
GENERAL SPECIFICATIONS  
Switching frequency20K to 250KHz, varies with load and  
Total output power:  
Ripple and noise:  
Overvoltage protectionProvided on output #1 only; set  
at 112 – 132% of its nominal  
110 watts maximum  
1% peak to peak maximum  
line  
Efficiency:  
70% minimum on single output  
models with Vo 12V, 65% minimum  
on the others  
output voltage  
Hold-up time:  
Line regulation:  
Inrush current:  
12 msec minimum at 110VAC  
±0.5% maximum at full load  
15 amps @ 115VAC, or 30 amps  
@ 230VAC, at 25ºC cold start  
3000VAC from input to output  
1500VAC from input to ground  
500VAC from output to ground  
550,000 hours minimum at full load  
at 25ºC ambient , calculated per  
MIL-HDBK-217F, excluding DC fan  
Overcurrent protectionAll outputs protected to short  
circuit conditions  
Temperature coefficientAll outputs ±0.04%/ºC  
maximum  
Withstand voltage:  
MTBF:  
Transient response:  
Maximum excursion of 4% or  
better on all models, recovering  
to 1% of final value within  
500µs after a 25% step load  
change  
TTL logic high for normal  
operation and TTL logic low  
upon loss of input power. This  
signal appears at least 1ms  
prior to +5V output dropping  
5% below its nominal value.  
This signal also provides a  
minimum delay of 100ms after  
+5V is within regulation.  
EMC performance (EN55024)  
EN55022:  
FCC:  
VCCI:  
EN61000-3-2:  
EN61000-3-3:  
EN61000-4-2:  
EN61000-4-3:  
EN61000-4-4:  
EN61000-4-5:  
EN61000-4-6:  
EN61000-4-8:  
PFD signal (optional):  
Class B conducted, class B radiated  
Class B conducted, class B radiated  
Class B conducted, class B radiated  
Harmonic distortion, class A  
Line flicker  
ESD, ±8KV air and ±4KV contact  
Radiated immunity, 3V/m  
Fast transient/burst, ±1KV  
Surge, ±1KV diff, ±2KV com.  
Conducted immunity, 3Vrms  
Magnetic field immunity, 1A/m  
EN61000-4-11: Voltage dips, 30% reduction for 500ms and  
>95% reduction for 10ms  
Tumbler Technologies + TRUMPower  
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA  
Phone: 408-988-6616 Fax: 408-988-6622 email: sales@trumpower.com Website: www.TRUMPower.com  
UNIVERSAL INPUT  
TUP110 SERIES  
OUTPUT VOLTAGE/CURRENT RATING CHART  
Maximum  
Output #1  
Output #2  
Output #3  
Output #4  
Output  
Power  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
110W  
Product No.  
TUP110-S05  
TUP110-S12  
TUP110-S15  
TUP110-S24  
TUP110-S30  
TUP110-S48  
TUP110-D23  
TUP110-T31  
TUP110-T32  
TUP110-Q40  
TUP110-Q41  
TUP110-Q42  
TUP110-Q45  
TUP110-Q45-1  
TUP110-Q45-2  
TUP110-Q46  
Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Ipeak. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol.  
5V  
12V  
15V  
24V  
30V  
48V  
+5V  
+5V  
+5V  
+5V  
+5V  
+5V  
+5V  
+5V  
+5V  
+5V  
0A  
22A 5%  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
5A  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
0A  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
(N/A)  
0A  
0A 9.0A 4%  
0A 7.5A 3%  
0A 4.5A 3%  
0A 3.6A 3%  
0A 2.3A 3%  
0A  
0A  
0A  
0A  
0A  
0A  
0A  
2A  
0A  
0A  
10A 5% +12V  
0A  
0A  
0A  
0A  
0A  
0A  
0A  
0A  
0A  
0A  
9.0A 5%  
9.0A 5%  
7.5A 5%  
9.0A 5%  
7.5A 5%  
9.0A 5%  
9.0A 5%  
9.0A 5%  
5.0A 5%  
7.5A 5%  
10A 5% +12V  
10A 5% +15V  
10A 5% +12V  
10A 5% +15V  
10A 5% +12V  
10A 5% +12V  
10A 5% +12V  
10A 5% +24V  
10A 5% +15V  
5A  
4A  
-12V  
-15V  
-12V  
-15V  
-12V  
-12V  
-12V  
-12V  
-15V  
1A 5%  
1A 5%  
1A 5%  
1A 5%  
1A 5%  
1A 5%  
1A 5%  
1A 5%  
1A 5%  
0A  
0A  
0A  
0A  
5A  
4A  
-5V  
+24V  
+12V  
+24V  
1A  
1A  
1A  
1A  
5%  
5%  
5%  
5%  
0A  
0A  
0A  
5A  
5A  
0A  
0A  
0A  
0A  
5A  
3A  
+24V 15A  
3A 10%  
+12V  
-5V  
0A  
0A  
1A  
1A  
5%  
5%  
4A  
Notes:  
(1) Peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130 watts.  
(2) The output #1 of model TUP110-Q45-1 needs a minimum current of 2A to support the other outputs at their maximum  
rated loads.  
MECHANICAL SPECIFICATIONS  
1.  
2.  
3.  
4.  
Dimensions show in inch [mm]  
Tolerance 0.02 [0.5] maximum  
Weight: 1.40 Kgs (3.08 Lbs.) approx.  
Standard output connector is a male 8-pin power DIN. Please  
contact TRUMPower for other options.  
NOTES:  
5.  
6.  
To order a model with on/off switch, add suffix “S” to the model  
number, e.g. TUP110-T31-K1-S.  
To order a model with PFD signal, add suffix “PF” to the model  
number, e.g. TUP110-T31-K1-PF.  
PIN CHART  
PIN  
1
2
3
4
5
6
7
8
Product No.  
TUP110-S05  
TUP110-S15  
TUP110-S30  
TUP110-D23  
TUP110-S12  
TUP110-S24  
TUP110-S48  
OUTPUT  
#1  
OUTPUT  
#1  
OUTPUT  
#1  
N.C. or  
PFD  
RETURN  
RETURN  
N.C.  
RETURN  
RETURN  
COMMON  
RETURN  
COMMON  
RETURN  
OUTPUT  
#1  
OUTPUT  
#1  
OUTPUT  
#2  
OUTPUT  
#2  
COMMON  
RETURN  
COMMON  
RETURN  
OUTPUT  
#1  
OUTPUT  
#1  
N.C. or  
PFD  
N.C. or  
PFD  
N.C.  
N.C.  
TUP110-T31  
TUP110-T32  
OUTPUT  
#3  
TUP110-Q40  
TUP110-Q42  
TUP110-Q45-1 TUP110-Q45-2  
TUP110-Q46  
TUP110-Q41  
TUP110-Q45  
COMMON  
RETURN  
OUTPUT  
#3  
OUTPUT  
#1  
OUTPUT  
#4  
OUTPUT  
#2  
COMMON  
RETURN  
OUTPUT  
#1  
N.C. or  
PFD  
Tumbler Technologies + TRUMPower  
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA  
Phone: 408-988-6616 Fax: 408-988-6622 email: sales@trumpower.com Website: www.TRUMPower.com  

相关型号:

TUR1620CTA

16.0 Ampere Heatsink Common Anode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR1620CTG

16.0 Ampere Heatsink Common Cathode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR1640CTA

16.0 Ampere Heatsink Common Anode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR1640CTG

16.0 Ampere Heatsink Common Cathode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR1660CTA

16.0 Ampere Heatsink Common Anode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR1660CTG

16.0 Ampere Heatsink Common Cathode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR3020CTA

30 Ampere Heatsink Dual Common Anode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR3020CTD

30 Ampere Heatsink Dual Doubler Polarity Ultra Fast Recovery Rectifiers
THINKISEMI

TUR3020CTG

30 Ampere Heatsink Dual Common Cathode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR3020CTS

30 Ampere Heatsink Dual Series Connection Ultra Fast Recovery Rectifiers
THINKISEMI

TUR3040CTA

30 Ampere Heatsink Dual Common Anode Ultra Fast Recovery Rectifiers
THINKISEMI

TUR3040CTD

30 Ampere Heatsink Dual Doubler Polarity Ultra Fast Recovery Rectifiers
THINKISEMI