TS4264G_08 [TSC]
5V/150mA Fixed-Voltage Ultra Low LDO; 5V / 150毫安固定电压超低LDO型号: | TS4264G_08 |
厂家: | TAIWAN SEMICONDUCTOR COMPANY, LTD |
描述: | 5V/150mA Fixed-Voltage Ultra Low LDO |
文件: | 总5页 (文件大小:269K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TS4264G
5V/150mA Fixed-Voltage Ultra Low LDO
SOT-223
Pin Definition:
1. Input
2. Ground (tab)
3. Output
General Description
The TS4264GCW50 is a monolithic integrated low-drop fixed voltage regulator which can supply loads up to 150mA.
It is functional compatible to the TS4264GCW50 but has a reduced quiescent current of typ. 40µA. The
TS4264GCW50 is especially designed for all applications which are require very low quiescent currents. This ULDO
is designed to supply microprocessor systems under the severe condition of automotive applications and is therefore
equipped with additional protection against overload, short-circuit and over temperature. Of course the
TS4264GCW50 can be used in all other applications, wherever a stabilized voltage is required.
An input voltage in the range of 5.5V ~ 45V is regulated to VOUT= 5V with an accuracy of ±3%. An accuracy of ±2% is
kept for a load current range up to 50mA. The device operates in the temperature range of TJ = –40 ~150°C.
Features
Ordering Information
●
●
●
●
●
●
●
●
●
Fixed Output Voltage 5V
Part No.
Package
SOT-223
Packing
Output Voltage Tolerance ±3%
150mA Current Capability
TS4264GCW50 RP
2.5Kpcs / 13” Reel
Ultra Low Quiescent Current 40uA (Typ.)
Over Temperature Protection
Short-Circuit Proof
Pin Definition and Function
Pin Symbol
Function
Reverse Polarity Proof
Block to ground directly on IC with
ceramic capacitor
1
2
3
Input
Ground
Output
Wide Temperature Polarity Range
Suitable for use in Automotive Electronics
Ground
Block to ground with 10uF capacitor,
ESR < 4Ω
Block Diagram
1/5
Version: A08
TS4264G
5V/150mA Fixed-Voltage Ultra Low LDO
Absolute Maximum Rating
Parameter
Limit Values
Symbol
Unit
Notes
Min.
-42
5.5
--
Max.
45
Input Voltage
VIN
VIN (OPR)
IIN
V
V
Input Voltage (Operating Range)
Input Current
45
--
--
Internally Limited
Internally Limited
Output Voltage
VOUT
IOUT
-0.3
--
32
V
Output Current
--
--
Ground Current
IGND
50
--
mA
ºC
ºC
ºC
Junction Temperature
Junction Temperature (Operating Range)
Storage Temperature
TJ
--
150
150
150
TJ (OPR)
TSTG
-40
-50
Thermal Performance
Parameter
Limit Values
Symbol
Unit
Notes
Min.
--
Max.
Thermal Resistance Junction-Ambient
RΘJA
RΘJP
80
17
oC/W
oC/W
Thermal Resistance Junction-Pin
--
Note: Measured to pin 2 (tab)
Electrical Characteristics VIN=13.5V, -40≤ TJ ≤+150, unless otherwise specified.
Limit Values
Parameter
Output Voltage
Symbol
Unit
Notes
Min.
4.85
4.90
150
--
Typ.
5.0
5.0
200
40
Max.
5.15
5.10
500
60
VOUT
VOUT
IOUT
V
V
6V ≤ VIN ≤ 21V, 5mA ≤ Io ≤ 100mA
6V ≤ VIN ≤ 16V, 5mA ≤ Io ≤ 50mA
Output Voltage
Output Current Limit
mA
Io= 100uA, TJ ≤ 85ºC
Io= 100uA
uA
Current Consumption
IQ
--
40
70
--
1.7
0.22
50
4
mA
V
Io= 50mA
Dropout Voltage (Note)
Load Regulation
Line Regulation
VDROP
REGLOAD
REGLINE
PSRR
--
0.5
90
Io= 100mA
--
mV
mV
dB
uF
5mA ≤ Io ≤ 100mA, VIN = 13.5V
6V ≤ VIN ≤ 28V, Io=1mA
f = 100Hz, VR= 0.5VPP
ESR ≤ 4Ω @ 10kHz
--
5
30
Ripple Rejection
Output Capacitor
--
68
--
COUT
10
--
--
Note: Dropout voltage = VIN – VOUT
(Measured where VOUT has dropped 100mV from the nominal value obtained at VIN = 13.5V)
2/5
Version: A08
TS4264G
5V/150mA Fixed-Voltage Ultra Low LDO
Application Information
In the TS4264GCW50 the output voltage is divided and compared to an internal reference of 2.5V typical. The
regulation loop controls the output to achieve an output voltage of 5V with an accuracy of ±3% at an input voltage
range of 5.5V~45V.
Circuit Description
The control amplifier compares a reference voltage, which is kept highly precise by resistance adjustment, to a voltage
that is proportional to the output voltage and drives the base of the series transistor via a buffer. Saturation control,
working as a function of load current, prevents any over-saturation of the power element. The IC is additionally
protected against overload, over temperature and reverse polarity
Typical Application Circuit
Dimensioning Information on External Components
The input capacitor CIN is necessary for compensating line influences. Using a resistor of approx. 1Ω in series with CIN,
the oscillating of input inductivity and input capacitance can be clamped. The output capacitor COUT is necessary for the
stability of the regulating circuit. Stability is guaranteed at values COUT ≥10uF and an ESR ≤ 4Ω within the operating
temperature range.
The application circuit shows additional electrolytic input capacitor of 470uF is added in order to buffer supply line
influences. This capacitor is recommended, if the device is sourced via long supply lines of several meters.
The TS4264GCW50 can supply up to 150mA. However for protection for high input voltage above 25V, the output
current is reduced (SOA protection).
3/5
Version: A08
TS4264G
5V/150mA Fixed-Voltage Ultra Low LDO
SOT-223 Mechanical Drawing
SOT-223 DIMENSION
MILLIMETERS INCHES
DIM
MIN
6.350
2.900
3.450
0.595
4.550
2.250
0.835
6.700
0.250
10°
MAX
6.850
3.100
3.750
0.635
4.650
2.350
1.035
7.300
0.355
16°
MIN
0.250
0.114
0.136
0.023
0.179
0.088
0.032
0.263
0.010
10°
MAX
0.270
0.122
0.148
0.025
0.183
0.093
0.041
0.287
0.014
16°
A
B
C
D
E
F
G
H
I
J
K
1.550
1.800
0.061
0.071
Marking Diagram
Y
= Year Code
M
= Month Code
(A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep,
J=Oct, K=Nov, L=Dec)
L
= Lot Code
50 = 5V Fixed Output Voltage
4/5
Version: A08
TS4264G
5V/150mA Fixed-Voltage Ultra Low LDO
Notice
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,
assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, to any
intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for
such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale
and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability,
or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for
any damages resulting from such improper use or sale.
5/5
Version: A08
相关型号:
©2020 ICPDF网 联系我们和版权申明