TS431ACX-ZRFG [TSC]

Adjustable Precision Shunt Regulator;
TS431ACX-ZRFG
型号: TS431ACX-ZRFG
厂家: TAIWAN SEMICONDUCTOR COMPANY, LTD    TAIWAN SEMICONDUCTOR COMPANY, LTD
描述:

Adjustable Precision Shunt Regulator

文件: 总10页 (文件大小:573K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TS431-Z  
Adjustable Precision Shunt Regulator  
SOT-23  
TS431-Z  
TS431AR-Z  
Pin Definition:  
1. Cathode  
2. Reference  
3. Anode  
Pin Definition:  
1. Reference  
2. Cathode  
3. Anode  
General Description  
TS431 integrated circuits are three-terminal programmable shunt regulator diodes. These monolithic IC voltage  
references operate as a low temperature coefficient zener which is programmable from VREF to 36 volts with two  
external resistors. These devices exhibit a wide operating current range to 250mA with a typical dynamic  
impedance of 0.2. The characteristics of these references make them excellent replacements for zener diodes in  
many applications such as digital voltmeters, power supplies, and op amp circuitry. The 2.495V reference makes it  
convenient to obtain a stable reference from 5.0V logic supplies, and since The TS431 operates as a shunt  
regulator, it can be used as either a positive or negative stage reference.  
Features  
Ordering Information  
Programmable Output Voltage up to 36V  
Part No.  
Package  
Packing  
TS431A – VREF 2.495V ±1% tolerance  
TS431B – VREF 2.495V ±0.5% tolerance  
Fast Turn-On Response  
TS431ACX-Z RFG  
TS431ARCX-Z RFG  
TS431BCX-Z RFG  
SOT-23  
SOT-23  
SOT-23  
3kpcs / 7” Reel  
3kpcs / 7” Reel  
3kpcs / 7” Reel  
Sink Current Capability: 200mA  
Low Dynamic Output Impedance: 0.2(Typ)  
Min. Operating Cathode Current: 0.2mA (Typ)  
Halogen Free  
Note: “G” denotes for Halogen- and Antimony-free as those which  
contain <900ppm bromine, <900ppm chlorine (<1500ppm total  
Br + Cl) and <1000ppm antimony compounds  
Block Diagram  
Absolute Maximum Ratings (TA = 25oC unless otherwise noted)  
Parameter  
Symbol  
Limit  
36  
Unit  
V
Cathode Voltage  
VKA  
Continuous Cathode Current Range  
Reference Input Current Range  
IK  
+250  
10  
mA  
mA  
IREF  
Power Dissipation  
PD  
0.25  
W
oC  
Operating Temperature Range  
TOPER  
-20 ~ +85  
Junction Temperature  
TJ  
-40 ~ +125  
-40 ~ +125  
156  
oC  
oC  
oC/W  
Storage Temperature Range  
Thermal Resistance Junction to Ambient  
TSTG  
RӨJA  
Note: RӨJA is measured with the PCB copper area of approximately 1 in2 (Multi-Layer)  
1/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Electrical Characteristics (TA=25oC, unless otherwise specified)  
Parameter  
Symbol  
Test Conditions  
Min  
2.470  
2.483  
Typ  
Max  
2.520  
2.507  
Unit  
TS431A  
TS431B  
Reference  
voltage  
VREF  
VKA =VREF, IK =10mA (Figure 1)  
2.495  
V
Deviation of reference input  
voltage  
VKA = VREF, IK =10mA (Figure 1)  
TA=-20~85oC  
VREF  
--  
6
20  
mV  
VKA = 10V to VREF  
VKA = 36V to 10V  
--  
--  
-1.2  
-1.0  
-2.0  
-2.0  
Radio of change in Vref to  
change in cathode Voltage  
VREF  
/VKA  
IKA =10mA,  
(Figure 2)  
mV/V  
R1=10K, R2=  
(Figure 2)  
, IKA =10mA  
Reference Input current  
IREF  
--  
--  
1.5  
0.4  
3.5  
1.2  
µA  
µA  
Deviation of reference input  
current, over temp.  
R1=10K, R2=  
TA=-20~85oC (Figure 2)  
, IKA =10mA  
IREF  
Off-state Cathode Current  
Dynamic Output Impedance  
IKA (off)  
VREF =0V (Figure 3), VKA =36V  
f<1KHz, VKA = VREF (Figure 1)  
--  
--  
0.1  
0.2  
1.0  
0.5  
µA  
| ZKA  
|
Minimum operating cathode  
current  
IKA (min) VKA = VREF (Figure 1)  
--  
0.2  
0.5  
mA  
* The deviation parameters VREF and IREF are defined as difference between the maximum value and minimum  
value obtained over the full operating ambient temperature range that applied.  
* The average temperature coefficient of the  
reference input voltage, αVREF is defined as:  
Where: T2-T1 = full temperature change.  
αVREF can be positive or negative depending on whether the slope is positive or negative.  
Example: Maximum VREF=2.496V at 30oC, minimum VREF =2.492V at 0oC, VREF =2.495V at 25oC, T=70oC  
αVREF | = [4mV / 2495mV] * 106 / 70oC 23ppm/oC  
Because minimum VREF occurs at the lower temperature, the coefficient is positive.  
* The dynamic impedance ZKA is defined as:  
| ZKA | = VKA / IKA  
* When the device operating with two external resistors, R1 and R2, (refer to Figure 2) the total dynamic impedance  
of the circuit is given by:  
| ZKA | = v / i | ZKA | * ( 1 + R1 / R2)  
2/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Test Circuits  
Figure 1: VKA = VREF  
Additional Information – Stability  
Figure 3: Off-State Current  
Figure 2: VKA > VREF  
When The TS431A/431B is used as a shunt regulator, there are two options for selection of CL, are recommended for optional  
stability:  
A) No load capacitance across the device, decouple at the load.  
B) Large capacitance across the device, optional decoupling at the load.  
The reason for this is that TS431A/431B exhibits instability with capacitances in the range of 10nF to 1uF (approx.) at light  
cathode current up to 3mA (typ). The device is less stable the lower the cathode voltage has been set for. Therefore while the  
device will be perfectly stable operating at a cathode current of 10mA (approx.) with a 0.1uF capacitor across it, it will oscillate  
transiently during start up as the cathode current passes through the instability region. Select a very low capacitance, or  
alternatively a high capacitance (10uF) will avoid this issue altogether. Since the user will probably wish to have local  
decoupling at the load anyway, the most cost effective method is to use no capacitance at all directly across the device. PCB  
trace/via resistance and inductance prevent the local load decoupling from causing the oscillation during the transient start up  
phase.  
Note: if the TS431A/431B is located right at the load, so the load decoupling capacitor is directly across it, then this capacitor  
will have to be 1nF or 10uF.  
3/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Applications Examples (Continue)  
Figure 4: Voltage Monitor  
Figure 5: Output Control for Three Terminal  
Fixed Regulator  
Figure 7: High Current Shunt Regulator  
Figure 6: Shunt Regulator  
Figure 9: Constant Current Source  
Figure 8: Series Pass Regulator  
4/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Applications Examples (Continue)  
Figure 10: TRIAC Crowbar  
Figure 11: SCR Crowbar  
Vin  
Vout  
<Vref  
V+  
>Vref 0.74V  
Figure 12: Single-Supply Comparator with  
Temperature-Compensated Threshold  
Figure 13: Constant Current Sink  
Figure 14: Delay Timer  
5/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Typical Performance Characteristics  
Figure 15: Small-Signal Voltage Gain and Phase Shirt vs. Frequency  
Figure 16: Reference Impedance vs. Frequency  
6/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Typical Performance Characteristics (Continue)  
Figure 17: Stability Boundary Condition  
Figure 18: Pulse Response  
7/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Electrical Characteristics  
Figure 20: IREF vs. Temperature  
Figure 19: Reference Voltage vs. Temperature  
Figure 22: IKA vs. VKA (mA)  
Figure 21: IKA vs. VKA (uA)  
8/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
SOT-23 Mechanical Drawing  
Unit: Millimeters  
Marking Diagram  
Rx = Device Code  
R1 = TS431A (±1%)  
RA = TS431AR (±1%)  
R2 = TS431B (±0.5%)  
Y
= Year Code  
2 = 2012, 3 = 2012, 4 = 2014 ………….  
W = Week Code  
01 ~ 26 (A~Z)  
27 ~ 52 (a ~ z)  
X
= Internal ID Code  
9/10  
Version: C14  
TS431-Z  
Adjustable Precision Shunt Regulator  
Notice  
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,  
assumes no responsibility or liability for any errors or inaccuracies.  
Information contained herein is intended to provide a product description only. No license, express or implied, to  
any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of  
sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty,  
relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose,  
merchantability, or infringement of any patent, copyright, or other intellectual property right.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.  
Customers using or selling these products for use in such applications do so at their own risk and agree to fully  
indemnify TSC for any damages resulting from such improper use or sale.  
10/10  
Version: C14  

相关型号:

TS431ACY

Adjustable Precision Shunt Regulator
TSC

TS431AI

LOW VOLTAGE ADJUSTABLE SHUNT REFERENCE
STMICROELECTR

TS431AIL

1-OUTPUT TWO TERM VOLTAGE REFERENCE, 1.24V, PDSO5, SOT-23, 5 PIN
STMICROELECTR

TS431AILT

LOW VOLTAGE ADJUSTABLE SHUNT REFERENCE
STMICROELECTR

TS431AISRL

Adjustable Precision Shunt Regulator
TSC

TS431AITA3

Adjustable Precision Shunt Regulator
TSC

TS431AITB0

Adjustable Precision Shunt Regulator
TSC

TS431AIXRF

Adjustable Precision Shunt Regulator
TSC

TS431AIYLT

Low voltage adjustable shunt reference
STMICROELECTR

TS431AIYLT1

LOW VOLTAGE ADJUSTABLE SHUNT REFERENCE
STMICROELECTR

TS431AIYRM

Adjustable Precision Shunt Regulator
TSC

TS431AIZ

LOW VOLTAGE ADJUSTABLE SHUNT REFERENCE
STMICROELECTR