TS9010_07 [TSC]

150mA CMOS LDO with Enable; 150毫安CMOS LDO与启用
TS9010_07
型号: TS9010_07
厂家: TAIWAN SEMICONDUCTOR COMPANY, LTD    TAIWAN SEMICONDUCTOR COMPANY, LTD
描述:

150mA CMOS LDO with Enable
150毫安CMOS LDO与启用

文件: 总6页 (文件大小:235K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TS9010 Series  
150mA CMOS LDO with Enable  
SOT-25  
Pin Definition:  
1. Ground  
2. Input  
3. Enable  
4. N/C  
5. Output  
General Description  
The TS9010 series is combine high accuracy with very low power consumption, providing high output current even  
when the application requires very low dropout voltage. The Chip Enable (CE) includes a CMOS or TTL compatible  
input allows the output to be turned off to prolong battery life. The TS9010 series is included a precision voltage  
reference, error correction circuit, a current limited output driver and over temperature shutdown.  
This series are offered in 5-pin SOT-25 package.  
Features  
Ordering Information  
Dropout voltage typically 0.4V @Io=150mA (Vo=5V)  
Part No.  
Package  
SOT-25  
Packing  
Output current up to 150mA (Vout=3V)  
Low power consumption  
Output voltage ±2%  
TS9010xCX5 RF  
3Kpcs / 7” Reel  
Note: Where x denotes voltage option, available are  
A= 1.5V  
D= 1.8V,  
K= 2.5V,  
S= 3.3V,  
Internal current limit  
Thermal shutdown protection  
Applications  
5= 5.0V.  
Contact factory for additional voltage options.  
Palmtops  
Video recorders  
Typical Application Circuit  
Battery powered equipment  
PC peripherals  
High-efficiency linear power supplies  
Digital signal camera  
Block Diagram  
CE (pin 3) may be connected directly to Vin (pin 2)  
1/6  
Version: A07  
TS9010 Series  
150mA CMOS LDO with Enable  
Absolute Maximum Rating (Note 1)  
Parameter  
Symbol  
Vin  
Limit  
+12  
Unit  
V
Input Supply Voltage  
Enable Input Voltage  
Vce  
Io  
0 ~ Vin+0.3  
200  
V
Output Current  
mA  
mW  
oC/W  
oC  
Power Dissipation (Note 3)  
Thermal Resistance  
PD  
380  
Өja  
Tj  
220  
Operating Junction Temperature Range  
Storage Temperature Range  
Lead Soldering Temperature (260oC)  
-40 ~ +125  
-65 ~ +150  
5
TSTG  
oC  
S
Recommend Operating Rating (Note 2)  
Input Supply Voltage  
Vin  
+10  
V
V
Enable Input Voltage  
Vce  
Gnd-0.3 ~ Vin+0.3  
Electrical Characteristics (Ta = 25oC, Cout=2.2uF, Vce2V, unless otherwise noted.)  
Min  
Typ  
Max  
Unit  
Parameter  
Conditions  
Vin=Vo + 1V, Io= 40mA  
Output Voltage  
0.98|Vo|  
1.02|Vo|  
V
Output Voltage Temperature  
Coefficient (Note 4)  
Line Regulation  
--  
--  
--  
100  
0.2  
30  
--  
ppm/ oC  
%/V  
Vo+1V Vin Vo+2V, Io=1mA  
0.3  
80  
Vin=Vo+1V,  
Vo 2.5V  
1mAIL150mA  
Vin=Vo+1V,  
1mAIL80mA  
Io=80mA  
Load Regulation (Note 5)  
Dropout Voltage (Note 6)  
mV  
Vo< 2.5V  
--  
--  
40  
90  
200  
400  
mV  
Io=150mA  
--  
--  
--  
--  
--  
--  
--  
400  
0.01  
--  
700  
1
Vin0.4V (shutdown)  
Vin=Ven=Vo+1V  
Vin=Vo+1V, Ven=Gnd  
Vout=0V  
Quiescent Current  
uA  
uA  
Ground Pin Current (Note 7)  
19  
0.1  
--  
--  
Output Current Limit  
300  
45  
mA  
dB  
At f=100Hz, Io=0.1mA,  
Power Supply Rejection Ratio  
Thermal Regulation (Note 8)  
--  
0.05  
--  
%/W  
2/6  
Version: A07  
TS9010 Series  
150mA CMOS LDO with Enable  
Electrical Characteristics (continued)  
Min  
Typ  
Max  
Unit  
Parameter  
Conditions  
Enable Input  
Enable Input Logic-Low Voltage  
Enable Input Logic-High Voltage  
Regulation shutdown  
Regulation enable  
Vce=Vin  
--  
1.5  
--  
--  
--  
0.25  
--  
V
V
--  
1
Enable Input Current  
Notes:  
uA  
Vce=Gnd  
0.2  
0.05  
0
a. Exceeding the absolute maximum rating may damage the device.  
b. The device is not guaranteed to function outside its operating rating.  
c. The maximum allowable power dissipation at any Ta is Pd(max) = [ Tj(max) - Ta] * Өja. Exceeding the maximum  
allow able power dissipation will result in excessive die temperature, and the regulator will go into thermal  
shutdown.  
d. Output voltage temperature coefficient is defined as the worst case voltage change divided by the total  
temperature range.  
e. Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for  
load regulation in the load range from 1mA to 150mA(Vout>2.5V) and 1mA to 80mA(Vout<2.5V).  
Changes in output voltage due to heating effects are covered by the thermal regulation specification.  
f. Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal  
value measured at 1V differential.  
g. Ground pin current is the regulator quiescent current plus pass transistor base current. The total current drawn  
from the supply is the sum of the load current plus the ground pin current.  
h. Thermal regulation is defined as the change in output voltage at a time “t” after a change in power dissipation is  
applied, excluding load or line regulation effects. Specifications are for a 150mA load pulse at Vin=12V for t=10mS.  
3/6  
Version: A07  
TS9010 Series  
150mA CMOS LDO with Enable  
Application Examples  
Standard Circuit  
Typical Application Circuit 2  
4/6  
Version: A07  
TS9010 Series  
150mA CMOS LDO with Enable  
SOT-25 Mechanical Drawing  
SOT-25 DIMENSION  
MILLIMETERS  
INCHES  
MIN  
DIM  
MIN  
0.09  
0.30  
0.09  
2.70  
1.40  
MAX  
1.25  
0.50  
0.25  
3.10  
1.80  
MAX.  
0.0492  
0.0197  
0.0098  
0.1220  
0.0709  
A+A1  
B
C
D
E
0.0354  
0.0118  
0.0035  
0.1063  
0.0551  
E
1.90 BSC  
0.0748 BSC  
H
2.40  
3.00  
0.09449  
0.1181  
L
0.35 BSC  
0.0138 BSC  
Ө1  
S1  
0º  
10º  
0º  
10º  
0.95 BSC  
0.0374 BSC  
5/6  
Version: A07  
TS9010 Series  
150mA CMOS LDO with Enable  
Notice  
Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf,  
assumes no responsibility or liability for any errors or inaccuracies.  
Information contained herein is intended to provide a product description only. No license, express or implied, to any  
intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for  
such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale  
and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability,  
or infringement of any patent, copyright, or other intellectual property right.  
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers  
using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for  
any damages resulting from such improper use or sale.  
6/6  
Version: A07  

相关型号:

TS9010_08

150mA CMOS LDO with Enable
TSC

TS9011

250mA CMOS Low Dropout Voltage Regulator
TSC

TS90115CT

250mA CMOS Low Dropout Voltage Regulator
TSC

TS90115CX

250mA CMOS Low Dropout Voltage Regulator
TSC

TS90115CXRFG

250mA Low Quiescent Current CMOS LDO
TSC

TS90115CY

250mA CMOS Low Dropout Voltage Regulator
TSC

TS90115CYRMG

250mA Low Quiescent Current CMOS LDO
TSC

TS9011ACT

250mA CMOS Low Dropout Voltage Regulator
TSC

TS9011ACX

250mA CMOS Low Dropout Voltage Regulator
TSC

TS9011ACXRFG

250mA Low Quiescent Current CMOS LDO
TSC

TS9011ACY

250mA CMOS Low Dropout Voltage Regulator
TSC

TS9011CTA3

250mA Low Quiescent Current CMOS LDO
TSC